SAMSUNG ELECTRONICS Q60B 65 Inch QLED 4K TV Instructions

SAMSUNG ELECTRONICS Q60B 65 Inch QLED 4K TV

Product Information

The F/W Upgrade Guide Samsung Electronics is a guide that provides instructions on how to upgrade the firmware of Samsung electronic devices. Firmware is software that is embedded in electronic devices to control their functions. The upgrade process helps to improve the performance and functionality of electronic devices.

product How to prepare the USB Memory Drive

1. Download the firmware file from Samsung.com into your computer.
2. Unzip the downloaded files.
3. Connect a USB Memory Drive to a USB port of your PC.
4. Copy the unzipped file to the USB Memory Drive.
5. Confirm that the file has been added to the top folder of the USB memory drive.
6. Safely disconnect the USB memory drive by clicking on `Safely Remove’ in Task Bar.

Caution:

1. The following events may interrupt the update process and result in permanent damage to the unit:
   • Unplugging the power cord while the update is in process.
   • Power Outage while the update is in process.
   • Removing the USB memory drive while the update is in process.
2. Please do not rename any of the updated files. We do not guarantee any defects caused by renaming the software file.

Product How to upgrade the Firmware by USB

1. Turn on the unit and insert the USB drive into the USB port on the bottom of the unit.
2. Press the source button( ) on the top panel or remote to select USB mode. The update will start automatically in less than one minute.
3. A sequence of UPDATE Progress(%) ON will appear on the display. It would take around 2 minutes.

Important:

• Please DO NOT turn off the power or remove the USB while the update is in progress.
• We recommend initializing the unit after updating the firmware is completed. Turn on the unit and then press and hold VOL + & VOL
  • buttons on the top panel for 5 seconds. The unit will appear INIT on the display.

Product Usage Instructions

1. Download the firmware file from Samsung.com into your computer.
2. Unzip the downloaded files.
3. Connect a USB Memory Drive to a USB port of your PC.
4. Copy the unzipped file to the USB Memory Drive.
5. Confirm that the file has been added to the top folder of the USB memory drive.
6. Safely disconnect the USB memory drive by clicking in `Safely Remove’ in Task Bar.
7. Turn on the unit and insert the USB drive into the USB port on the bottom of the unit.
8. Press the source button on the top panel or remote to select USB mode. The update will start automatically in less than one minute.
9. A sequence of UPDATE Progress(%) ON will appear on the display. It would take around 2 minutes.
10. Please DO NOT turn off the power or remove the USB while the update is in progress.
11. We recommend initializing the unit after updating the firmware is completed. Turn on the unit and then press and hold VOL + & VOL- button on the top panel for 5 seconds. The unit will appear INIT on the display.

How to prepare the USB Memory Drive

1. Download the firmware file from Samsung.com into your computer
2. Unzip the downloaded files.
3. Connect a USB Memory Drive to the USB port of your PC. Copy the unzipped file to the USB Memory Drive.
4. Confirm that the file has been added to the top folder of the USB memory drive.
5. Safely disconnect the USB memory drive by clicking in ‘ Safely Remove ’ in Task Bar.

[Caution]

1. The following events may interrupt the update process and result in permanent damage to the unit.
2. Unplugging the power cord while the update is in
3. Power Outage while the update is in
4. Removing the USB memory drive while the update is in
5. Please do not rename any of update files. We do not guarantee any defects caused by renaming the software file

How to upgrade the Firmware by USB

1. Turn on the unit and insert the USB drive into the USB port on the bottom of the unit.
2. Press the source button( ) on the top panel or remote to select USB mode. The update will start automatically in less than one minute.
3. A sequence of “UPDATE” → Progress(%) → “ON” will appear on the It would take around 2 minutes.

• Important Please DO NOT turn off the power or remove the USB while the update.
• We recommend initializing the unit after the update firmware is completed.
  • Turn on the unit and then press and hold the “VOL +” & “VOL -” buttons on the top panel for 5 seconds. The unit will appear “INIT“ on the display

References

• Samsung US | Mobile | TV | Home Electronics | Home Appliances | Samsung US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>