ibiza WAVE6 250W Stand-Alone Portable Party Box Instruction Manual

ibiza WAVE6 250W Stand-Alone Portable Party Box

TOP PANEL

REMOTE CONTROL

RECHARGEABLE PARTY BOX 2 X 5.25″/13CM – 250W

OPERATING INSTRUCTIONS
Congratulations to the purchase of your new speaker.

EXPLANATION OF SIGNS
In accordance with the requirements of UK standards The product is for indoor use only

IMPORTANT SAFETY INSTRUCTIONS AND DANGER WARNINGS

• Please read the manual carefully and keep it for future reference.
• The unit shall be connected to a power supply only of the type described.
• To reduce the risk of fire or electrical shock, do not expose this unit to rain or moisture.
• Adequate care shall be taken so that foreign objects do not fall, or liquids are not spilled into the enclosure through openings.
• Do not remove the cover or back, as there are no user-serviceable parts inside.
• For indoor use only
• Do not place on the apparatus a naked flame source, such as lighted candles.
• The unit should only be used in moderate climates
• A minimum distance of 0.5m around the unit must be kept to ensure sufficient ventilation and avoid overheating.
• All safety instructions and warnings must be adhered to. They are part of the manual and must be kept with the manual.
• Any guarantee claims are rendered invalid if damage occurs due to the non-observance of these operating instructions. We assume no liability for any consequent damage.
• We assume no liability for personal injury or damage to property caused by incorrect handling or disrespect of the safety instructions. Any guarantee claims expire in such cases.
• Unauthorized conversions and/or modifications of the appliance are not permitted for safety and licensing reasons (CE).
• The appliance may not be exposed to extreme temperatures (< +5°C / > +35°C) in operation.
• The appliance may not be subject to strong vibrations or heavy mechanical strain.

IMPORTANT NOTE ON LITHIUM-ION BATTERIES

PRIOR TO USING THE UNIT FOR THE FIRST TIME, PLEASE CHARGE FULLY THE BATTERY

1. Charge the battery regularly after each use. Don’t wait until it is discharged!
2. DON’T allow the battery to discharge completely, otherwise, it will lose 20% of its capacity or even be totally damaged! If the voltage becomes too low, the internal circuits are not powered anymore and it will become impossible to recharge the battery!
3. 3. If you don’t use the unit for a longer period of time, it is recommended to charge it at 40% of its capacity and check/charge it once per month.

BATTERIES ARE NOT COVERED BY THE WARRANTY

We cannot be held responsible for damaged batteries further to the non- observance of these basic rules.

CHARGING THE BATTERY

Prior to using the unit for the first time, fully charge the built-in battery. Plug de DC connector of the supplied mains adaptor into the input socket (5) on top of the unit and the other end into an appropriate mains outlet. The built-in battery will start charging, no matter if the speaker is on or off. On the display, the battery charging symbol will run from 1 to 3 cells. Once the battery is fully charged, it will display steadily 3 cells

DESCRIPTION OF TOP PANEL

1. USB input: Dual function- Play or Charge USB device
2. MicroSD card input
3. AUX input
4. MIC input
5. DC input to power/charge the speaker
6. ON/OFF switch
7. In BT/USB/MicroSD mode: press shortly =Previous song In AUX mode, this button has no function
8. ▶ǁ Play/pause: In USB/MicroSD/BT mode this button has the Play/Pause function In AUX mode, this button has no function
9. In BT/USB/MicroSD mode: press shortly = Next song; In AUX mode: no function
10. MODE switch to select among AUX/BT/USB/MicroSD mode.
11. Repeat button: Repeat one song, repeat all songs
12. BT button: in BT mode: press to disconnect the Bluetooth source. In any other mode: Long press to connect BT
13. Press to cycle through 6 light effect modes and switch the LED illumination on and off
14. MENU button: details see below
15. Volume control
16. LED display

MENU BUTTON (14)

This button allows to make various adjustments in conjunction with the VOLUME control (15). Press the MENU button:

• If b is displayed, rotate the VOLUME control (15) to adjust the low frequencies of the sound output
• If t is displayed, rotate the VOLUME control (15) to adjust the high frequencies of the sound output
• If MU is displayed, rotate the VOLUME control (15) to adjust the microphone volume
• If EC is displayed, rotate the VOLUME control (15) to adjust the echo effect of the microphone
• If Mb is displayed, rotate the VOLUME control (15) to adjust the low frequencies of the microphone
• If Mt is displayed, rotate the VOLUME control (15) to adjust the high frequencies of the microphone
• If U is displayed, rotate the VOLUME control (15) to adjust the master volume. You can adjust the master vo-lume also directly any time by rotating the VOLUME wheel (15)

INSTRUCTIONS OF USE

• Press the ON/OFF button to switch the unit on.
• Press the MODE button to select an input source between AUX/BT/USB/MicroSD or plug in an auxiliary source, USB or micro-SD and the speaker will automatically switch to the source you just plugged in.
• To use BT mode, you must first pair your smartphone or any other Bluetooth-enabled device with the speaker. To select BT mode when a device has been paired, press the MODE button until BLUE is displayed.

BT PAIRING MODE:

1. Press MODE button until BT is displayed.
2. Put the cell phone within 3 meters;
3. Activate the BT features on your cell phone so that the cell phone starts to search for the BT device. Please refer to the users’ manual for details
4. Select “WAVE6″ from the device list found by the cell phone;
5. Press RETURN key on the cell phone to exit from the cell phone menu and play music with the unit when there is no barrier between two cell phones within 10 meters. At this time, you can play music with the unit.
6. Shortly press PLAY/PAUSE button to play or pause music. Short press key to select the previous or next track.

TWS PAIRING MODE:

1. Make sure both speakers are OFF.
2. Go to your phone’s Bluetooth interface and make sure that it is not connected to either of the speakers. If your phone is connected, choose to forget or remove the speakers from the list of available devices.
3. Turn both speakers ON, press the MODE button on both speakers. The word « BLUE » should appear on both LCD screens and flash intermittently.
4. Press the « NEXT » button on either one of the speakers for 5 seconds. Both units will enter pairing mode.
5. One of the units will show the word « BLUE » on the LCD display. This is the master unit and will act as the left channel, while the other one will be the slave unit and will act as the right channel.
6. Go to your phone’s Bluetooth interface and select « WAVE6 » from the list of available devices. If pairing is successful, the word BLUE on the master unit will stop flashing.
7. To disconnect the speakers, select any other mode on either one of the speakers.

AUX IN MODE:
Connect an audio lead from the AUX output of your audio device to the AUX input on the unit. Press MODE button until AUX is displayed. When a device is plugged into the AUX socket, it will disconnect all other audio devices. In AUX mode, all functions can be controlled by the external device.
USB MODE:

1. After start-up, press MODE to select “USB” and insert the USB device. The unit will automatically read and play the music in the USB device.
2. Press “▶ǁ ” key shortly to pause or play the track.
3. Shortly press key to skip to the previous track.
4. Shortly press key to skip to the next track.

USB CHARGING FUNCTION

If you don’t use the USB input to play files from a USB media, you can connect your smartphone to this input to charge your battery. The socket supplies an output voltage of 5V 1A.

MICROSD MODE:

1. After startup, press MODE to select “MicroSD” and insert the MicroSD card. The unit will automatically read and play the music in the MicroSD card.
2. Press “ ▶ǁ” key shortly to pause or play the music.
3. Shortly press key to skip to the previous track.
4. Shortly press key to skip to the next track.

CONNECTION OF A MICROPHONE

Connect the microphone to the MIC input and switch it on.
Note: If you are playing music from any other input, connecting the microphone will not mute the sound output.
KARAOKE FUNCTION
This feature is available with any input. Play a track through USB/MicroSD/Bluetooth/AUX, connect a microphone and sing along. Adjust the volume, echo, bass and treble via the MENU button (14) and the VOLUME wheel (15).
BUILT-IN RECORDING FUNCTION OF MICROPHONE SOUND
Connect a microphone to the MIC input. Plug a USB stick/micro-SD card into the correct input. Press the MODE key and select USB or micro-SD. If you plug the USB stick/Micro-SD card into this speaker for the first time, the unit will create a folder called RECORD. All recordings will be automatically saved in this folder. When you are ready to record, press the REC key. The recording will start when the screen displays 00:01.

INSTALLING THE BATTERIES IN THE REMOTE CONTROL
Remove the battery cover from the back of the remote control as shown and insert 2x AAA size batteries ensuring correct polarity
RECOMMENDATIONS FOR BATTERIES

This symbol indicates that used batteries should not be disposed of with household waste but deposited in separate collection points for recycling.

WARNING
Danger of explosion if battery is incorrectly placed. Only replace by the same or equivalent type. Keep new and old batteries out of the reach of children. If the battery compartment doesn’t close properly, stop using the product and keep it out of the reach of children.

DESCRIPTION OF THE REMOTE CONTROL

1. MUTE: Mutes the sound output
2. Mode button
3. REC: Press to record your voice
4. REC PLAY: Press to play your record
5. Increase the volume
6. Select previous file
7. Play/Pause
8. Select next file
9. Reduce the volume
10. Repeat one / repeat all
11. Equalizer: Cycles through the various music styles: Normal – Rock – Classic – Jazz – Pop
12. Number buttons for direct input of a file number. Press the number of the file to access it directly. For files numbers above 9, press 1+ the unit. Ex. For file number 15, press 1 + 5. For file number 38, press 3+8

TROUBLESHOOTING

No sound output when

power on

| 1: No input sound source| 1:Connect a AUX signal
2: Volume in the lowest position| 2: Adjust volume
3: USB/MicroSD not connected| 3: Insert a USB/MicroSD Card

Distortion of sound

| 1:Volume too loud| 1: Turn volume lower
2: Audio file error| 2: Check and change the audio file
 | 3: Adjust Bass/Treble by “MENU” and

“Main volume”

No sound from the

Microphone

| 1:Microphone socket not fully plugged in| 1: Completely plug in the microphone

socket

2: Microphone switch is not on| 2: Power on microphone
3: Microphone volume too low| 3: Adjust microphone volume

No sound from the

USB/MicroSD card

| 1:incompatible song format| 1: songs format should be MP3/WMA
2: Illegal operation causes failures| 2: Power off, then power on
3:USB/MicroSD Card not inserted properly| 3: Insert USB/MicroSD card properly

Speaker makes much noise

| 1: Microphone too close to the speaker| 1: Do not let the microphone’s head point

at the speaker

2: Microphone is switched on but not in

use

| 2: Turn off microphone if not in use
3: Microphone volume too loud| 3: Reduce the microphone volume
4: Mobile phone too close to the speaker| 4: Keep mobile away from the speaker

during calls

5: Too close to the equipment which

interferes with the speaker

| 5: Keep the speaker away from other

sources of interference

Blue-connect Failure

| 1: Blue-connect Disconnected| 1: Find the right device Name
2: Blue-connect Connected but no voice| 2: Confirm if you are connected to the

right device Name

3: Blue-connect effective distance too

short

| 3: Try to keep away from barriers, such

as walls, glasses…etc

SPECIFICATIONS

• Max. power……………………………………………………………………………………………………………………………250W
• Woofer…………………………………………………………………………………………………………………….2 x 5.25″/13cm
• Freq. range…………………………………………………………………………………………………………………. 100Hz-18kHz
• BT frequency …………………………………………………………………………………………………………… 2402-2480MHz
• BT Max RF Power ……………………………………………………………………………………………………………..-0.85dBm
• Power supply………………………………………………….. 9V 2A via supplied 100-240V~ 50/60Hz mains adaptor
• Built-in battery……………………………………………………………………………………………. Lithium 7.4V 4400mAh
• Operating time on battery at medium power………………………………………………………………………………. 2-4h
• Dimensions………………………………………………………………………………………………………. 260 x 250 x 560mm
• Weight …………………………………………………………………………………………………………………………………. 4.5kg

The product design and specifications may be changed without prior notice! This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

References

• Oslo Sportslager - kvalitet - service - kunnskap i 90 år

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>