VigilLink VLSP-14CTH14 1×4 HDMI 1.4 Splitter Over CAT 70m 10.2Gbps User Manual

VigilLink VLSP-14CTH14 1×4 HDMI 1.4 Splitter Over CAT 70m 10.2Gbps

Thank you for purchasing this product
Please read these instructions carefully for optimum performance and safety before connecting, operating, or adjusting this product. Please keep this manual for future reference.

A surge protection device is recommended.
This product contains sensitive electrical components that electrical spikes may damage, surges, electric shocks, lightning strikes, etc. The use of surge protection systems is highly recommended to protect and extend the life of your equipment.

Introduction

This 18Gbps HDMI Extender can extend high-definition video/audio signal, RS-232, and bi-directional IR. The distance is up to 492ft / 150 meters between the transmitter and receiver via a single CAT cable. It supports resolutions up to 4K2K@60Hz 4:4:4, 18Gbps, and HDCP 2.2. One HDMI loop port is available for output. The extender also supports de-embedded audio for L/R audio output. In addition, the extender is equipped with a two-way IR pass- through, which allows for source and display control. This HDMI extender includes two units: a transmitter unit and a receiver unit. The transmitter unit is responsible for capturing the HDMI input signal and carrying the sign via one cost-effective Cat5e/6 cable and transmitting/emitting IR control signals. The receiver unit is responsible for receiving the HDMI signal and transmitting/emitting the IR control signal. The extender offers the most convenient solution for HDMI extension via a single Cat5e/6 with long-distance capability and is the perfect solution for any application.

Features

• HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
• Support 18Gbps video bandwidth
• The maximum extended transmission distance via a single Cat5e/6 cable: 394ft / 120 meters for 4K2K signal 492ft / 150 meters for 1080P signal
• Support one HDMI loop output on the transmitter
• Extract audio to analog stereo output on the receiver
• With bi-directional IR, RS-232, and CEC pass-through
• HDR, HDR10+, Dolby Vision, and HLG functions supported
• Supports PoC (Power over Cable) function
• Compact design for easy and flexible installation

Package Contents

1. 1 × HDMI 1×4 Splitter
2. 4 × CAT Receiver
3. 1 × IR Blaster Cable (1.5 meters)
4. 4 × IR Receiver Cable (1.5 meters)
5. 2 × Mounting Ear
6. 1 × 12V/2.5A DC Locking Power Adapter
7. 8 × Machine Screw (KM3*4)
8. 1 × User Manual

Specifications

****|
---|---
HDMI Compliance| HDMI 1.4
HDCP Compliance| HDCP 1.4
Video Bandwidth| 297MHz/10.2Gbps
Video Resolution| 480i ~1080p50/60Hz, 4Kx2K@30Hz (4：4：4)
Color Depth| 8-bit,10-bit,12-bit (1080p@60Hz); 8-bit (4K30Hz)
Color Space| RGB, YCbCr_4:4:4/4:2:2. YUV_4:2:0
Audio Formats| LPCM 7.1CH, Dolby True HD, and DTS-HD Master Audio
ESD Protection| Human body model—±8kV (Air-gap discharge) &

±4kV (Contact discharge)

Connection

Transmitter

| Input:      1×HDMI IN [Type A, 19-pin female] Outputs: 1×HDMI OUT [Type A, 19-pin female]

4x CAT OUT [RJ45]

Controls: 1× IR OUT [3.5mm Stereo Mini-jack] 1x EDID DIP switch [4-pin]

1x Update [Micro USB]

Receiver

| Inputs: 1x IR IN [3.5mm Stereo Mini-jack] 1x CAT IN [RJ45, 8-pin female]

Output: 1x HDMI OUT [Type A, 19-pin female]

Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| Transmitter: 210mm (W) × 83mm (D) × 18mm (H) Receiver: 79.5mm (W) × 69mm (D) × 16.5mm (H)
Weight| Transmitter: 448g; Receiver: 130g
Power Supply| 12V/2.5A DC Power

(US/EU standards, CE/FCC/RoHs certificated)

Power Consumption| 11W
Operation Temp.| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)

Operation Controls and Functions

Transmitter Panel

will be on.

2| CAT OUT (1~4)| Connect to the CAT port of the Receiver with a CAT6 cable.
3| Power LED (Green)| Transmitter supports one-way POC function. When it

supplies power to the Receiver through a CAT cable, the Power LED will be on.

4

| Data Signal Indicator (Yellow)| ▪  Illuminating: HDMI signal with HDCP.

▪  Flashing: HDMI signal without HDCP.

▪  Dark: No HDMI signal.

5| HDMI OUT| HDMI loop output port, connect to the HDMI display device such as TV or Monitor with an HDMI cable.
6| HDMI IN| HDMI input port, connect to HDMI source device such as DVD or set- top box with an HDMI cable.
7| IR OUT| Connect to IR blaster cable, the IR signal is from “IR IN” port of the Receiver.
8| EDID DIP

Switch

| Used to set EDID mode. Please refer to Section “6. EDID Mode” for details.
9| UPDATE| Mini USB update port. Connect to PC for firmware updating.
10| DC 12V| DC 12V Power input port.
11| POWER

Switch

| Press the switch to power on/off the device (“-” for on, “o” for off).

Receiver Panel

device such as HDTV.

2| IR IN| Connect to IR receiver cable, the IR signal will emit to the IR OUT port of the transmitter.
3| CAT| CAT input port. Connect to the CAT output port of the transmitter with a CAT6 cable.

4

| Power LED (Green)| When the Receiver is powered on, the LED will be on. The device supports POC function, so the Receiver is powered by the Transmitter through a CAT cable.

5

| Data Signal Indicator (Yellow)| ▪  Illuminating: HDMI signal with HDCP.

▪  Flashing: HDMI signal without HDCP.

▪  Dark: No HDMI signal.

IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:

Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters; when the angle between the IR receiver and the remote control is ± 90 °, the transmission distance is 0-8 meters.

EDID Mode

The defined EDID setting list of the product is shown as below:

Application Example

The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>