MAGIO MG-130 Steam Iron Instruction Manual

MG-130
STEAM IRON
Instruction manual

| |
---|---|---

DRAFT

DESCRIPTION

1. Soleplate with holes for a pair
2. The iron body
3. The nozzle of the water sprayer
4. Water tank cover
5. Steam supply control/Self-cleaning button
6. Button of a sprayer of water| 7. Button of a burst steam
8. Power cord protection
9. Handle
10. Heel support
11. Light indicator
12. Temperature controller
13. Water tank
---|---

Dear customer, Magio thank you for making your choice in favor of our brand products and guarantees the high quality of the appliance you purchased, subject to meeting the requirements of the user’s manual

Safety precautions and warnings

Before use, please read this user’s manual carefully and keep it for the entire period of use. Use the appliance only for its intended purpose, as specified in this manual. Improper use of the appliance may lead to its breakdown, causing harm to the user or their property.

• The appliance is intended for domestic use only. The appliance is not intended for industrial or commercial use, as well as for use:
  – in kitchen areas for staff in shops, offices, and other production facilities
  – in farmhouses
  – by clients in hotels, motels, boarding houses, and other similar places of residence

• Use the appliance indoors only.

• Do not touch the appliance body, power cord, and power plug with wet hands.

• Do not spill water or any liquid on the appliance, its power cord, and plug.

• Do not immerse the body of the appliance in water or any other liquid.

• If the appliance falls into the water, unplug it immediately. In this case, do not put your hands in the water. Before further use, the appliance must be checked by a qualified specialist.

• The temperature in rooms where the appliance is used must be in the range from +5 °C to +40 °C.

• Before connecting the appliance to the mains, make sure that the voltage indicated on the appliance matches the voltage of the mains supply in your house.

• Keep the power cord away from sharp edges and hot surfaces.

• Do not stretch, bend, or lengthen the power cord as this may result in its break.

• During the operation of the appliance, the power cord must be unrolled to its full length.

• If the power cord is damaged, it must be replaced by a specialist.

• Unplug the appliance from the mains when you do not use it or before it’s cleaned. When unplugging the appliance, do not pull on the power cord but pull directly on the plug.

• Do not use the appliance if the mains plug or power cord is damaged, if the appliance operates intermittently, or after the appliance has been dropped.

• Place the appliance on a flat dry and stable surface.

• The appliance must not be left unattended when connected to power.

• Do regular cleaning of the appliance.

• Do not leave children unattended near electrical appliances.

• This appliance is not intended for use by persons (including minors) with reduced physical or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

• This appliance can be used by children aged 8 and over provided they are supervised or have been instructed on the safe use of the appliance and understand the resulting risk. This appliance can be used by persons with reduced physical, sensory or mental abilities if they are supervised or have been instructed on the safe use of the appliance. Children must not play with the appliance. Cleaning and maintenance can make children older than 8 years under supervision. The appliance and its cord must be kept out of the reach of children under 8 years of age.

• For the safety of children, do not leave plastic bags that are used as packaging unattended.

• The appliance can only be connected to a grounded main. Do not use non-standard power supplies or other connecting devices.

• Use only the accessories that are recommended by the manufacturer.

• Protect the appliance from drops and bumps.

• Do not repair the appliance yourself. Do not disassemble the appliance yourself, if any malfunctions occur, or after the appliance has been dropped, unplug the appliance and contact the nearest (authorized) service center at the contact addresses specified in the warranty card and at www.magio.ua.

• To protect the environment at the end of its service life, do not dispose of the appliance with household waste, but take it to a specialized recycling center for further disposal.

• Always unplug the appliance if it is left unattended and before assembling and disassembling or cleaning it.

• It is forbidden to add perfumes, vinegar, starch, antiscale agents, ironing liquid, and other substances to water.

• Do not use the device near flammable substances.

• During operation, the appliance produces hot steam that can cause burns. Be careful when working, do not touch the hot parts of the appliance.

• Avoid any contact of the operating device with skin, hair, face, and eyes.

• Never ironing clothing on a person.

• Do not open the water inlet holes during ironing.

• Do not cover the spray holes or allow foreign objects to come into contact with them.

• Allow the appliance to cool completely before packaging it.

• Keep the steam iron with the cord in a place not accessible to children under the age of 8 and persons with physical or mental disabilities if it is under voltage or cooled.

• The steam iron shouldn’t be used if it has been dropped, if there are visible signs of damage, or if the steam iron is leaking.

• Steam irons and irons with a sprayer must be unplugged before filling the water tank.

• When placing the iron on the stand, make sure that the base is placed on an unstable surface.

Note
In the water tank may be residues of water – this is normal, as in the production of the ( appliance passed quality control.
Sphere of use
The appliance can be used for all types of fabrics and for smoothing the folds on clothes. If you are in doubt about the use of the appliance for a particular type of fabric or clothing, refer to the label on the product. If there is no such information, try to iron the fabric from the backside.
Unpacking and assembly
After transporting or storing the appliance at a low temperature, keep it at room temperature for at least three hours.

1. Check the integrity of the appliance; if damaged, do not use the appliance.
2. Remove any stickers and packing materials that interfere with the operation of the appliance.

Before using it for the first time

1. Clean the holes on the soleplate so the dirt, perhaps caught in the holes during the manufacture of the appliance, could not stain the fabric.
   Note ( t:0 Before switching on the unit, make sure that the mains voltage corresponds to the voltage specified on the body of the unit.

2. Unreel the cord and plug it into an outlet.

3. Before using the iron for the first time, first use a piece of unnecessary fabric to make sure the surface is clean enough.

Note
Certain parts of the iron have been lightly greased therefore the iron could give off a little smoke when plugged in for the first time. This will cease after a short while.

Advice:
» If the material of the product is unknown, determine the ironing temperature by ironing a section that is invisible when worn or when using the product.
»  Products made from silk, woolen, and synthetic materials should be ironed from the inside to prevent The appearance of shiny spots.
»  Products decorated with frills, stripes, etc. It is recommended to iron at low temperatures.
»  Velvet and glossy fabrics must be ironed in the same direction.
»  Silk items should be ironed while they are wet Do not spray water on dry silk.
»  If the product consists of several types of fabrics, select the minimum temperature.

Operating procedure

1. Place the iron on a stable surface in an upright position on the heel support.
2. Connect the iron to the mains, the red indicator will light up.
3. Choose the temperature mode according to The instructions on the label of the clothes.
4. The iron reaches the set temperature and is ready for use when the iron heating indicator lights up green.

To iron without using steam, turn the steam regulator to the “No steam” position.

Steam ironing

1. Fill the tank
   – Unplug the iron before filling the tank.
   – Set the steam level control to the “No steam” position, otherwise, the water being poured may leak through the holes in the sole.
   Warning!
   » Never fill the iron tank directly under the water tap.
   » Use only distilled water to pour into the water tank. Do not fill the water tank beyond the MAX indication.
   » Do not use hot water, the water temperature should not be higher than +50 °C.
   » Do not add perfume, vinegar, magnetically treated water, starch, descaling agents, ironing aids, chemically descaled water, or other chemicals as they may cause water spitting, brown staining, or damage to your appliance.
   » This iron is designed to use tap water. However, if your water is hard enough, we recommend using a mixture of /2 tap water and /2 distilled water.

2. Connect the device to the power source.

3. Set the temperature controller to ••• (MAX). The heating indicator will light up. When the iron reaches the desired heating temperature, the indicator goes off.

4. Adjust the steam supply

Note
The function «Steaming» can be used only at the maximum heating temperature. Otherwise, hot water may leak through the holes in the sole.

Advice:
» Turn off steam while ironing silk or synthetics.
» Set it to the minimum level for woolen products.
» Start ironing only after the heating indicator goes off.

Steam boost function

1. Follow steps 1, 2, and 3 of (Steam Ironing».
2. Set the steam regulator to the No steam position.
3. From time to time, press the button of a burst steam.

Note
» Observe a few seconds interval between presses on the button of a burst steam.
» Using this function is only possible when the temperature controller is set to ••• (MAX).
»  If you press the button of burst steam too often, the temperature of the soleplate may drop below the set temperature. Stop pressing the button of a burst steam and let the iron sole heat up.

Vertical steam function

1. Follow steps 1, 2, and 3 of «Steam Ironing,.
2. Hang clothes on a hanger and pull fabric lightly with one hand.
3. Press the button of a burst steam abruptly and move the iron along the surface of the fabric.

Advice:
» Keep the iron a few centimeters from the fabric.
»  Vertical steaming is suitable for clothes and curtains from thin fabrics.
»  Vertical smoothing is not recommended for synthetic fabrics.
»  Do not touch the sole of the iron to the fabric to avoid melting it.
Do not steam clothing worn on a person. The temperature of the steam is very high.

Spray function

1. Before using this function, make sure that the tank is full of water.
2. During ironing, press the water sprayer button several times in a row to moisten the fabric.

Note
The spray function can be used in any mode.

Anti-drip function
The iron is equipped with a special protection system that prevents water from leaking when ironing at low temperatures. Now you can iron the most delicate fabrics using steam. When the temperature is lower than necessary for the formation of steam, the system will automatically limit the water supply.

Auto shut off
This function is automatically activated when the iron is stationary in a horizontal position (on the sole) for 30 seconds, or in a vertical position (on the heel support) for 8 minutes. The function automatically shuts off when you start ironing.
Anti-cak
The anti-calc function allows for filtration of the minerals from the water to prevent mineral residue build-up in the steam chamber.

Self-cleaning function

1. Fill with water to the mark “MAX”.
2. Set the temperature control to “MAX”.
3. Plug in the appliance and the red indicator will light up.
4. Wait when the iron heating indicator lights up green.
5. Unplug the iron.
6. While holding the iron horizontally above the sink, move the steam level control to the Self-Clean position.
7. To clean the steam holes on the sole, iron a damp cloth.
8. When cleaning is complete, set the temperature control to the minimum temperature mark, and the steam supply level control to the “no steam” position.
9. Pour the remaining water out of the tank.

Note To increase the life of the iron, regularly clean it after two to three cycles of use.

Clean and care

1. Unplug the appliance.
2. Allow the device to cool down.
3. Always empty the water tank after use, to prevent scale build-up. Rinse the water tank to remove any deposits and allow it to dry out.
4. Clean the appliance with a damp cloth/sponge.

Warning!
» Do not use scouring pads, abrasive cleaning agents, or aggressive liquids such as alcohol, petrol, or acetone to clean the appliance.
» Don’t immerse the unit into water.
» Don’t use sharp or abrasive to clean the appliance.

Storage

1. Unplug the unit.
2. Clean the unit before taking the unit for storage.
3. Empty and allow to dry out the water tank.
4. Wind the power cord.
5. Keep the unit in a dry cool place out of reach of children and disabled persons.
6. Always store the cooled iron in an upright position on the heel of the support in a dry place.

Table of temperature conditions by type of fabric

Clothing label| Fabric type| Temperature mode| The power of steam
---|---|---|---
| synthetic| low| without steam
| silk| medium| without steam
wool| min.
| cotton| maximum| max.
linen
| not recommended for ironing

Troubleshooting

Problem: Water flows through holes in the soleplate.
Possible reason:
– the selected temperature is not sufficient to generate steam.
– the iron is not heated enough to use steam.
– the steam supply is too strong.
– the iron was stored in a horizontal position, the reservoir was not emptied, and the control knob was not off.
Possible solution:
– set the temperature dial at the MAX position.
– wait for the warning light to turn off.
– reduce steam flow.
– see section «Storage».
Problem: Brown stains from the soles stain the clothing.
Possible reason:
– use of chemical products for descaling.
– fabric fibers are stuffed into the holes of the sole and charred.
Possible solution:
– do not add any descaling products to the water tank.
– perform self-cleaning and use only clean water.
– clean the sole with a non-metallic washcloth.
– from time to time, clean the holes of the sole.
Problem: Dirty or brown soleplate soothes the clothing.
Possible reason:
– using too high a temperature.
– the laundry is not thoroughly rinsed or starch is used.
Possible solution:
– clean the soleplate as described above. Set the temperature controller according to the temperature table.
– clean the soleplate as described above.
– do not use starch.
Problem: Insignificant quantity or absence of steam.
Possible reason:
– the water tank is empty.
– scaling in the iron.
– the iron has been used without water for too long.
Possible solution:
– fill the water tank with clean water.
– perform self-cleaning. Problem: Scratched or damaged soleplate.
Possible reason:
– the iron was standing horizontally on a metal stand.
Possible solution:
– always place the iron on the heel support.

Technical specifications

Supply voltage: 220-240 V ~ 50-60 Hz
Rated power:1865 W
Maximum power 2400 W
Water tank capacity 300 ml
Steam: < 30 g/min
Service lifetime: 3 years
Does not contain harmful substances
Additional information: www.magio.ua
Questions related to the use of MAGIO products: supportOmagio.ua
The manufacturer reserves the right to change the design and specifications, packaging, product colors, warranty period, etc. without prior notice.

Note due to the continuous process of making changes and improvements, there may be some differences between the manual and the product. The manufacturer hopes that the user will pay attention to this.

| National mark of conformity assessment
---|---
| Mark of conformity with technical regulations of the Customs Union
| Mark of conformity with the requirements of the European Union
RoHS| Mark of compliance with the RoHS Directive adopted by the EU. Directive 2002/95/EC limiting the content of harmful substances.
| The mark Do not throw in the trash».
****| Warning! Hot surface!

| |
---|---|---
info@magio.ua
support@magio.ua
partnership@magio.ua| +38 (096) 00-00-786
+38 (093) 00-00-786| www.magio.ua
www.instagram.com/magio.ua
www.facebook.com/Magio
www.youtube.com/c/Magio_ua

https://magio.ua/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>