Shenzhen Ruichenxi Technology RCX-001 4K WiFi Dash Camera User Manual

Ruichenxi Technology RCX-001 4K WiFi Dash Camera
User Manual

Note: Please read the directions carefully before using.
Important notice

• This product is intended for use in motor vehicles only. Do not install the camera where it might block the driver’s view of the road (including the mirrors) or the deployment of the airbags.
• Before using this camera, please insert the memory card first, and format the memory card in the camera menu first.
• This camera records video at high resolution, Be sure to use a high-speed Micro SD card, Class 10 or above, 16GB or 32GB cards are recommended.
• This camera features a Built-in battery as internal power, it’s used only for saving the video file after the external power supply cuts off (the car turns off). This camera will not turn on without an external power supply.
• Be sure the camera lens is clean and there is nothing blocking the lens.
• Do not leave the camera in direct sunlight for a long period of time or where the temperature could go above 170°F (75°C).

Interface and button function

1. Up Button Wi-Fi on/off)

2. Menu Button

3. Down Button

4. Power Button

5. Lock Button

6. Mode Button

7. Ok Button

8. Mini USB Power Pod

9. Bucket
   

10. Micro SD Card Slot

11. Reset

12. MIC

13. Speaker

14. Lens

Basic Key Function

POWER| When power off, Press to turn on the camera. In any status, Press & Hold to turn on/off the camera.
---|---
OK| In Standby / Video / Photo Mode, short press to start /stop video recording / take photo.
In Setting Menu, short press to confirm selection and adjustment.
In Playback, short press to start/stop playing.
Menu| In standby, short press to Enter/ Quit Mode setting and System selling menu.
In Playback, short Press to enter File operation Menu.
Mode| In standby, short press twice to switch mode between video/photo/playback.
UP| In Setting Menu, short press to select an option and adjust values.
In Playback, short press to select media files.
Down| In Standby / Video Recording Mode, short press to turn on/off voice recording.
In Setting Menu, Short press to select an option and adjust values.
In Playback, short press to select media files.
Lock| In Video Mode, short press to lock the current video.

Installation Guide

1. Before installation, please check the camera’s normal function, make sure you are using a high-speed Micro SD card (speed Class 10 or above), and format the card in the camera menu before recording.
2. Power off the camera, Connect the suction cup mount to the camera with the Buckle.
3. Apply the suction cup mount to the windshield, and press down the clip on the mount, the ideal installation position should be near the center of the windshield and up high.
4. Adjust the angle of the camera, make sure you get the max recording range of the road, and fasten all screws.
5. Connect the power to the camera and the cigarette lighter, and hide the rest of the cable in the gap of the Interior trim board.
6. Use the suction cup mount to install the OK-760dash cam on the windshield, recommended place it near the rear-view mirror facing the front, and adjust the lens angle for best coverage.
7. Plug the included power adapter into the car cigarette lighter socket, the indicator will light up meaning power is on.
8. Connect the power adapter and the dashcam, and route the excess cable alongside the interior trim for better looking.
9. The rear camera should be installed above the number plate, screw pad upward, and connect the red power cable to their -verse lamp wire positive lead. (If you only buy a front camera, please ignore it!)
10. Route the camera cable to the front of the car, connect the black cable of the rear camera to the main device, and connect the red cable of the rear camera to the reversing lamp. There are 3 pictures for reference.

Operating Mode:

The OK-760 operates in 3 modes: Video Recording Mode, Photo Mode, and Playback Mode. This mode also has menus to help you configure recording and taking photos, press the Mode Button to access the mode you want. Watching the icon on the top left corner of the screen for each mode.
A. Video Recording Mode
The camera will automatically enter Video Recording Mode and start recording when connected to a car charger and powered on. A Red dot flashing on the top left corner indicates the recording is in progress. Press the “OK” button to stop recording for the standby mode, or start recording again. (Standby mode means that there are no ongoing operations.)
(1). Video Recording Mode interface

1. Video Mode Icon
2. Loop Recording Status
3. Exposure Value
4. Motion Detection
5. Audio
6. Date and Time
7. Power Status| 8. Memory Card Status
9. Parking Mode
10. Recording Time
11. Resolution
12 .G-sensor
13.WDR
---|---

In all 3 operating modes, you can press the MENU once to access the menu settings for that particular model, and press it twice to display the System Setting Menu. Press and to scroll through the various settings and press OK to select, press Menu again to exit the setting menu.
(2)Video Recording Menu:
In standby mode, press the “MENU” button to enter the setting menu of video recording mode, and press the “MENU” button twice to enter the system setting menu. Resolution: Adjust recording video resolution to 4K.
Loop Recording: This function allows you to set video file length to off/1/3/5 minutes, and select a value to activate loop recording, so when storage fills up, it will automatically loop back to the earliest file and record over it.
WDR: Turn ON/OFF Wide-Dynamic Range.
Exposure: Adjust the value to get better brightness sensitivity.
Motion Detection: This function allows the camera to start recording when it detects movement.
Audio: Turn ON / OFF audio recording in the video.
Date Stamp: Enable/Disable the date and time marks in video files.
G-Sensor: Off / Low/ Medium / High.
Park Mode: It’s used to protect your car after parking, with this function on, after you stop the car and the camera powers off, it will stay on standby, when the camera detects shock, it will automatically turn on and take a short video, then shut down automatically.
B.Photo Taking Mode
The OK- 760 camera can operate in Photo Taking Mode, and take HD photos up to 12 Megapixels.
To Take a Photo:
Simply power on the OK-760, press Mode to select Photo Mode, and press OK to take a photo. (if the dashcam is recording videos, stop recording first)
Like the video recording mode, you can press the Menu once to access the setting menu for photo mode. Press the menu twice to display the System Setting Menu.
(1)Photo Taking Mode Interface :

1. Photo Taking Mode Icon
2. Exposure Value
3. White Balance
4. ISO
5. Photo Quality
6. Date and Time| 7. Power Status
8. Memory Card Status
9. Remaining Photo Storage
10. Photo Resolution
11. Continuous Shooting
12. Anti-Shaking
---|---

(2)Menu of Photo Takin Mode:
In standby mode, press the “MENU” button to enter the setting menu of photo mode, and press the “MENU” button twice to enter the system setting menu.
Capture Mode: Single shot / 2s Delay / 5s Delay / 10s Delay.
Resolution: Set the photo resolution, 1.3M 1280720 / 2M 19201088 / 3M 20481600 / 5M 25922016 / 8M 34562480 / 10M 36482800 / 12M 4032*3040.
Continuous Shooting: Turn On / Off.
Quality: Defines the quality of image you capture, Fine / Normal / Economy.
Sharpness: Defines the clarity of details in the photos, Optional: Strong / Normal / Soft.
White Balance: Establishes the condition to capture an image based on the option given.
Optional: Auto / Daylight / Cloudy / Tungsten / Fluorescent.
Color: Normal / Black and White / Sepia.
ISO: Auto / 100 / 200 / 400.
Exposure: Set the brightness sensitivity.
Anti-Shaking: Turn ON / OFF.
Date Stamp: Enable/Disable the date and time marks on the photo.

C.Playback Mode
This mode allows you to playback recording video or view photos.

1. Stop video recording, and press Mode twice to enter Playback Mode.
2. Use and scroll through the recorded files/photos, and press OK to view the recorded video.

(1)Playback Menu:
In standby mode, press the “MENU” button to enter the setting menu of playback mode, and press the “MENU” button twice to enter the system setting menu. Delete: Delete the current file displayed or delete all files.
Protection: Lock / Unlock the current file displayed or Lock / Unlock all files.
Slide show: 2 seconds / 5 seconds / 8 seconds.
D.System Setting Menu
Press MENU twice to access the System Setting Menu in any mode. The icon is highlighted in the upper left corner. Screen Saver: Off / 30 Seconds / 1 Minute / 2 Minutes.
Auto Power Off: Off / 1 Minute / 3 Minutes / 5 Minutes.
Frequency: Set light frequency to 50Hz or 60Hz, and press OK.
Beep Sound: Turn On / Off.
Language: English / French / Spanish / Chinese/Japanese /available.
Date/Time: Change the time and date by using the up and down, then press OK to confirm.
Format: Format the Micro SD Card.
Default Setting: Reset all settings back to factory default.
Version: Firmware version.

Main Function and Features Introduction

• Loop recording
  In loop recording, the camera will record the video in 1/3/5 minutes clips, and when the card is full, the camera will cover the earliest clip with the latest one, and so forth. (Locked video will not be covered)

• Motion Detection
  Motion Detection is used to save storage space, when motion detection is on, the camera will automatically start recording when the camera detects movement is stopped. We do not recommend turning on this function during driving for your safety.

• G-Sensor lock
  When the car takes a collision, the G-sensor will be set off and the current video clip will be locked to save evidence, so it won’t be deleted in loop recording mode. (Sometimes you will see a lock(key) icon on the screen, that is G-sensor activated)

• Screen saver
  In order to guarantee safe driving, and not be affected by the light of the recorder, you can set the screen saver to shut off the display and press any key to turn it back on.

WIFI Function

How to connect to WiFi:

1. In the recording interface, pause the recording ( press the “OK button to pause ), long-press the “up button”, and the WIFI name and password will pop up.
2. Turn on the wifi on the mobile phone, link the corresponding wifi name, and enter the password: 12345678.
3. Open “road cam” and click the record button to enter.

How to exit WiFi mode:

1. First of all, the mobile phone must disconnect the wifi connection, and exit the APP.
2. Then long-press the upper button of the recorder to exit the WIFI mode.

You can download your videos on your iPhone or Android devices using the Roadcam APP.
Scan code to download APP: road cam

http://www.ligoor.com/app/roadcam/roadcam.html

Specification

Troubleshooting

Q: Keeping Saying Sd Card Full?
A:

1. Format your new sd card on the dashcam when first used. We suggest using a class 10 high-speed micro sd card, no more than 32 GB. ( Please remember to insert the sd card before the dashcam power on!)
2. Please check if you set loop recording success, if set success, there will have a mark on the dashcam screen.
3. Please do remember to close parking monitoring and motion detection functions when you’re driving on the road. (if not, these two functions trigger the captured locked videos which can’t be overwritten. If it shows the card fully, you need to format the card.)
4. If the G-sensor is set to a high level, it is easy to lock files and make the Micro SD card full, so suggested set to low, safe enough, and recommended to format your SD Card monthly.
5. If keep saying ” insert C6 and above sd card”, it may be because the sd card is not compatible with the dashcam. Some sd card on the market is false sd card. Please try a new sd card.

Q: The camera can not record video or take photos?
A: Be sure you are using a suitable memory card: Speed over Class 10, Capacity no less than 8GB. Be sure the memory card is formatted properly and inserted correctly.
Q: The camera automatically stops recording?
A: Format the memory card in the setting menu.
The G-sensor might be triggered too often and locks too many video files, try low sensitivity and turn off the motion detection function when you are driving.
Q: The camera can not turn on?
A: This camera features a Built-in battery as internal power, it’s used only for saving the video file after the external power supply cuts off (car turn off). This camera will not turn on without an external power supply. Check the power supply, make sure they are connected properly, the power indicator on the power adapter is on, and the connectors are tight.
Q: Suction mount cannot attach to windshield well?
A: Please clean the windshield with a glass cleaning wipe. Removed the protective film. Please soak the suction mount to warm water for a moment. If it is still not working, please contact us at Amazon Platform to get a replacement.
Q: The recorded video is unclear?
A: Make sure there are no fingerprints or dirt on the lens, try to adjust the angle to avoid blocks or glare, or windshield reflecting.
Q: Color of the video or photo is not good?
A: Verify that the Frequency option is set to 50Hz or set accordingly.
Q: The camera crashes or does not respond to operations?
A: Use a pin or an unfolded paper clip, and press the RESET button to restart the camera.
If you have any other questions or problems, please feel free to contact us at Amazon Platform. We have a professional team at your service, and your satisfaction is guaranteed.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located for operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>