eurolite 50101111 Mirror Ball 50cm User Manual

50101111 Mirror Ball 50cm
User Manual MIRROR BALL
30 cm & 50 cm 5×5 mm

50101111 Mirror Ball 50cm

Mirror Ball
Saftey mirror ball
No. 50100401 0 30 cm
No. 50101111 050 cm
www.eurolite.de
D00141224, version 1.0, publ. 28/07/2022
For product updates, documentation, software and support please visit www.eurolite.de. You can find the latest version of this user manual in the product’s download section.
© 2022 Eurolite. All rights reserved.
No part of this document may be reproduced in any form without the written permission of the copyright owner. The contents of this document are subject to revision without notice due to continued progress in methodology, design, and manufacturing. Eurolite shall have no liability for any error or damage of any kind resulting from the use of this document.
All trademarks mentioned herein are the property of their respective owners.
Experience Eurolite.
Product videos, suitable accessories, firmware andsoftware updates, documentation and the latest news about the brand. You will find this and much more on our website. You are also welcome to visit our YouTube channel and find us on Facebook. www.eurolite.de
www.youtube.com/eurolitevideo
www.facebook.com/Eurolitefans

INTRODUCTION

Welcome to Eurolite! Thank you for choosing one of our products. Eurolite is your connection to the world of show with an unparalleled variety of products, both for professionals and beginners.
If you follow the instructions given in this manual, we are sure that you will enjoy this product for a long period of time. This user manual will show you how to install, set up and operate your new Eurolite product.
Users of this product are recommended to carefully read all warnings in order to protect yourself and others from damage. Please keep this manual for future needs and pass it on to further owners.
Product features

• Mirror ball with a stable plastic core
• High stability due to integrated axle
• Exact alignment
• Genuine glass mirror facets (5×5 mm)
• Installation eyelet
• Additional safety eyelet for safety chain
• Delivery without motor

IMPORTANT SAFETY INSTRUCTIONS

WARNING!
Please read the safety warnings carefully and only use the product as describe in this manual to avoid accidental injury or damage.

Intended use

• This mirror ball is used in connection with adequate illumination to create decorative indoor lighting effects. The mirror ball is designed for ceiling mounting and driven by a motor. This product is designed for professional use in the field of event technology, e.g. in discos. Only use the product according to the instructions given herein.
  Damages due to failure to follow these operating instructions will void the warranty! We do not assume any liability for any resulting damage.

• Unauthorized rebuilds or modifications of the product are not permitted for reasons of safety and render the warranty invalid.

Warning – risk of injuries
WARNING!
Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down! Make sure that mirror ball is installed securely and cannot fall down. The installation must be carried out by a specialist who is familiar with the hazards and the relevant regulations. The mirror ball must be additionally secured. Make sure that the installation complies with the standards and rules that apply in your country, in particular
BGV C1 (DGUV Vorschrift 17) in Germany.
WARNING!
Risk of injury caused by falling objects
The fixture for hanging the mirror ball must be capable of bearing the 10-fold weight of the mirror ball for 1 hour without showing any harming deformation. The secondary chain must support at least 12 times the load.

• If you lack the qualification, do not attempt the installation yourself, but instead use a professional installer. Improper installation can result in bodily injury and or damage to property.
• The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety precautions.
• If the mirror ball and the motor are to be operated above persons, additional risks arise. A hazard analysis based on the location and application must be performed in order to ensure dimensioning and measures for a safe operation. Both the motor and the mirror ball meet the professional association safety regulations regarding safety and operation.
• Make sure that the area below the installation place is blocked when rigging, derigging or servicing the device.
• When handling mirror balls always wear gloves. Observe the danger of cutting and splintering by glass!
• Make sure that no side forces can impact on the installation and the rotation of the mirror ball is never slowed down or stopped by decoration material etc.
• For commercial use the country-specific accident prevention regulations of the government safety organization for electrical facilities must be complied with at all times.
• The operator has to make sure that safety-relating and machine-technical installations are approved by an expert before taking into operation for the first time and after changes before taking into operation another time.
• The operator has to make sure that safety-relating and machine-technical installations are approved by an expert after every four year in the course of an acceptance test.
• The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled person once a year.
• The operator has to make sure that all rigging gear is inspected by a qualified person before each use. The inspection must include a visual inspection and load tests in motion.

Danger to children and people with restricted abilities

• This product is not a toy. Keep it out of the reach of children and pets. Do not leave packaging material lying around carelessly. Never leave this device running unattended.
• This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.

INSTALLATION

1. Mirror ball motor

2. Motor axle

3. Screw-on chain link

4. Mirror ball chain

5. Installation eyelet

6. Mirror ball

7. Attachment eyelet

8. Safety chain

9. Attachment eyelet   

10. Only mount the mirror ball to the motor type MD-1515 for item no. 50100401 (see accessories) and motor type MD-2010 for item no. 5010111 (see accessories) or a motor which meets the relevant technical requirements.

11. Use mounting hardware that is compatible with the structure and capable of bearing the weight of the mirror ball. Please refer to the “Accessories” section for a list of suitable hardware. Never use abrading material such as steel cables in order to avoid material wearing.

12. Install the main attachment chain (max. 100 cm) with the screw-on chain link at the installation eyelet of the mirror ball and tighten the fixation screw. Then insert the fourth chain link of the secondary chain with the mirror ball in the screw-on chain link and tighten the fixation screw too.

13. Provide fall protection with an additional chain. The safety chain must be slightly longer than the main attachment chain. Pull the safety chain through the attachment eyelet of the mirror ball and in the attachment eyelet of the motor.

14. Please check in regular intervals if the mounting hardware (e. g. shackles, screw-on carabiners or screw-on chain links) or chain links have been deformed. Uninstall the mirror ball immediately in such a case.

CLEANING AND CARE

• Clean the surface with a dry, soft cloth. Never use chemicals or water.
• The product does not contain any parts to be maintained. Do not attempt repairs as this is a security risk. Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Mirror ball, Ø 30cm

Specifications are subject to change without notice due to product improvements.
Accessories

Mirror ball, Ø 50cm

Specifications are subject to change without notice due to product improvements.
Accessories

Eurolite is a brand of Steinigke
Showtechnic GmbH Andreas-Bauer-Str.
5 97297 Waldbüttelbrunn Germany
D00141224 Version 1.0
Publ. 28/07/2022

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>