HYTRONIK HBIR29/2CH PIR Standalone Motion Sensor Instruction Manual

PIR Standalone Motion Sensor with 5.0 SIG Mesh
DALI control with two independent channel outputs
HBIR29/2CH

Technical Specifications

CH2: 24VDC≤2A, 250VAC≤2A
Warming-up| 20s
Sensor principle| PIR detection
Installation height (Max.)| 6m
Detection range (Ø)| 9m
Detection angle| 360º
Operation temperature| Ta:-20 ºC~+50 ºC
IP rating| IP20
EMC standard (EMC)| EN55015, EN61000, EN61547
Safety standard (LVD)| EN60669-1/-2-1, AS/NZS60669-1/-2-1
RED| EN300328, EN301489-1/-17
Certification| CB, CE , EMC, RED, RCM, UKCA

Download the App

Free App for set-up and commissioning
5.0 SIG mesh

https://apps.apple.com/cn/app/koolmesh/id1483721878
https://play.google.com/store/apps/details?id=com.koolmesh.sig
Smartphone app for both iOS & Android platform

https://apps.apple.com/cn/app/koolmesh/id1570378349
Koolmesh Pro app for iPadhttp://www.iot.koolmesh.com

Installation

Mechanical Structure & Dimensions

1. Ceiling (drill hole φ66~68mm)
2. Carefully prise off the cable clamps.
3. Make connections to the pluggable terminal blocks.
4. Insert plug connectors and secure using the provided cable clamps, then clip terminal covers to the base.
5. Fit detection blind (if required) and desired lens.
6. Clip fascia to body.
7. Bend back springs and insert into ceiling.

Wire Preparation

Pluggable screw terminal. It is recommended to make connections to the terminal before fitting to the sensor.

1. 200 metres (total) max. for 1mm² CSA (Ta = 50 ℃)
2. 300 metres (total) max. for 1.5mm² CSA (Ta = 50 ℃)

Wiring Diagram

Dimming Interface Operation Notes

Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on Koolmesh app.

on/off – Recall a scene
– Turn on only – Exit manual mode
– Turn off only – Do nothing
Double push| – Turn on only – Exit manual mode
– Turn off only – Do nothing
– Recall a scene
Long press (1 second)
Colour tuning| – Dimming –
– Do nothing
Simulate sensor| /| – Upgrade a normal ort/off motion sensor to a Bluetooth controlled motion sensor

Big and small silicon gasket used to make IP54 degree protection when HBIR29/2CH series device mounted into HA03 housing for ceiling mount
Small silicon water-proof gasket dimension(size:mm)

Big silicon water-proof gasket dimension(size:mm)

HBIR29/2CH (Low-bay)

HBIR29/2CH: Low-bay flat lens detection pattern for single person @ Ta = 20ºC
(Recommended ceiling mount installation height 2.5m-6m)

Ceiling/Surface Mount Accessory HA03: Default IP20, IP65 can be request with extra big & small water-proof gaskets

Optional Accessory — Blind Insert for Blocking Certain Detection Angles

Additional Information/Documents

1. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
2.  Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com ->download/knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
3. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
4. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

Subject to change without notice.
HBIR29/2CH-20220424-A0

Documents / Resources

| HYTRONIK HBIR29/2CH PIR Standalone Motion Sensor [pdf] Instruction Manual
HBIR29-2CH PIR Standalone Motion Sensor, HBIR29-2CH, HBIR29-2CH Standalone Motion Sensor, PIR Standalone Motion Sensor, Standalone Motion Sensor, PIR Motion Sensor, Motion Sensor, Sensor
---|---

References

• iot.koolmesh.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>