PORTEGE X30-F Portable Laptop

User’s Manual
dynabook PORTEGE X30-F dynabook TECRA X40-F/X50-F dynabook PORTEGE X30-G/X40-G/X50-G

Table of Contents

Chapter 1 Chapter 2 Chapter 3 Chapter 4

Legal, Regulatory, and Safety Copyright, Disclaimer and Trademarks ………………………………………. 1-1 Regulatory Information ………………………………………………………………. 1-2 Video Standard Notice ……………………………………………………………… 1-10 OpenSSL Toolkit License Issues ………………………………………………. 1-10 FreeType License Issues ………………………………………………………….. 1-12 ENERGY STAR® Program ………………………………………………………… 1-16 Disposing of the computer and the computer’s battery ……………… 1-16 General Precautions ………………………………………………………………… 1-17 Safety Icons …………………………………………………………………………….. 1-19
Getting Started Equipment checklist ………………………………………………………………….. 2-1 Conventions ………………………………………………………………………………. 2-1 Using your computer for the first time ………………………………………… 2-2 Getting to know Windows ………………………………………………………….. 2-7 Turning off the power ………………………………………………………………… 2-8 System Recovery …………………………………………………………………….. 2-12
The Grand Tour Front with the display closed ……………………………………………………… 3-1 Left side …………………………………………………………………………………….. 3-2 Right side ………………………………………………………………………………….. 3-3 Back ………………………………………………………………………………………….. 3-4 Underside ………………………………………………………………………………….. 3-5 Front with the display open (PORTEGE X30-F/TECRA X40-F) ………. 3-6 Front with the display open (PORTEGE X30-G/PORTEGE X40-G) ………
3-9 Front with the display open (TECRA X50-F/PORTEGE X50-G) ……. 3-13 Internal Hardware Components ………………………………………………… 3-17 Power Condition Descriptions ………………………………………………….. 3-18
Operating Basics Using the Touch Screen …………………………………………………………….. 4-1 Using the Touch Pad ………………………………………………………………….. 4-2 Pointing Device …………………………………………………………………………. 4-3 The Keyboard ……………………………………………………………………………. 4-5 Using the Fingerprint Sensor ……………………………………………………… 4-8

User’s Manual

ii

Chapter 5 Chapter 6 Chapter 7

Battery …………………………………………………………………………………….. 4-10 Memory media …………………………………………………………………………. 4-13 Smart Card ………………………………………………………………………………. 4-16 Wireless WAN device ……………………………………………………………….. 4-17 GPS Function …………………………………………………………………………… 4-18 HDMITM out port ……………………………………………………………………….. 4-19 USB Type-CTM Adapters …………………………………………………………… 4-20 Wireless display ………………………………………………………………………. 4-27 Security lock ……………………………………………………………………………. 4-27 Optional Accessories ……………………………………………………………….. 4-28 Sound System and Video mode ………………………………………………… 4-29
Utilities and Advanced Usage Utilities and Applications …………………………………………………………… 5-1 Special features …………………………………………………………………………. 5-8
Troubleshooting Problem-solving process …………………………………………………………… 6-1 Hardware and system checklist ………………………………………………….. 6-4 Technical support ……………………………………………………………………. 6-15
Appendix Specifications ……………………………………………………………………………. 7-1 AC Power Cord and Connectors …………………………………………………. 7-2 Information for Wireless Devices ……………………………………………….. 7-3 Information about Intel® AMT …………………………………………………… 7-17 Information about Intel® Authenticate ………………………………………. 7-20 Accessibility ……………………………………………………………………………. 7-20 Accessibility for Dynabook notebook ……………………………………….. 7-20 Legal Footnotes ……………………………………………………………………….. 7-23
Index

User’s Manual

iii

Chapter 1

Legal, Regulatory, and Safety
This chapter states the legal, regulatory, and safety information applicable to your computer.
Copyright, Disclaimer and Trademarks
Copyright
© 2021 Dynabook Inc. All Rights Reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Dynabook Inc. No patent liability is assumed, with respect to the use of the information contained herein.
First edition October 2021
Copyright authority for music, movies, computer programs, databases and other intellectual property covered by copyright laws belongs to the author or to the copyright owner. Copyrighted material can be reproduced only for personal use or use within the home. Any other use beyond that stipulated above (including conversion to digital format, alteration, transfer of copied material and distribution on a network) without the permission of the copyright owner is a violation of copyright or author’s rights and is subject to civil damages or criminal action. Comply with copyright laws in making any reproduction from this manual.
Disclaimer
This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for your computer at the time of this manual’s production. However, succeeding computers and manuals are subject to change without notice. Dynabook Inc. assumes no liability for damages incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manual.
Any references in this Guide to “Dynabook” shall mean Dynabook Inc. and/ or its affiliates.
Trademarks
Intel, Intel logo, Thunderbolt, Thunderbolt logo are trademarks of Intel Corporation or its subsidiaries in the United States and/or other countries.
Microsoft, Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

User’s Manual

1-1

The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
DTS, the Symbol, & DTS and the Symbol together are registered trademarks and DTS Audio Processing is a trademark of DTS, Inc.
Wi-Fi is a registered trademark of Wi-Fi Alliance.
USB Type-CTM and USB-CTM are trademarks of USB Implementers Forum.
All other company names, product names, and service names mentioned herein may be trademarks of their respective companies.
Regulatory Information
The regulatory information herein might vary. Check the ID information on the bottom of the device or box for specific information applicable to the model you purchased.
FCC information
This device complies with FCC RF exposure requirements
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Only peripherals complying with the FCC class B limits can be attached to this equipment. Operation with non- compliant peripherals or peripherals not recommended by Dynabook is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s Universal Serial Bus (USB 3.2 Gen1) port,

User’s Manual

1-2

ThunderboltTM 3/USB Type-CTM port and HDMITM out port. Changes or modifications made to this equipment, not expressly approved by Dynabook or parties authorized by Dynabook could void the user’s authority to operate the equipment.

FCC conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including
interference that may cause undesired operation.

Contact

Address: Telephone:

Dynabook Americas, Inc. 5241 California Avenue, Suite 100 Irvine, California, USA, 92617
949-583-3000

This information is only applicable for the countries/regions where it is required.

California Prop 65 Warning
This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

For the state of California only.

Export Administration Regulation
This document contains technical data that may be controlled under the U.S. Export Administration Regulations, and may be subject to the approval of the U.S. Department of Commerce prior to export. Any export, directly or indirectly, in contravention of the U.S. Export Administration Regulations is prohibited.

User’s Manual

1-3

EU Declaration of Conformity
This product is carrying the CE mark in accordance with the related European Directives. Responsible for CE marking is Dynabook Europe GmbH, Stresemannallee 4b, 41460 Neuss, Germany. The complete and official EU Declaration of Conformity can be found on the website https://emea.dynabook.com/product-conformity.
CE compliance
Hereby, Dynabook Europe GmbH declares that the model(s) described in this manual is/are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://emea.dynabook.com/product-conformity.
This product is labeled with the CE mark in accordance with the essential requirements and other relevant provisions of the applicable European Directives, notably Radio Equipment Directive (2014/53/EU), RoHS Directive 2011/65/EU, Ecodesign Directive 2009/125/EC (ErP) and the related implementing measures.
This product and the original options are designed to observe the applicable EMC (Electromagnetic Compatibility) standards. However, Dynabook cannot guarantee that this product still observes these EMC standards if accessories or cables not produced by Dynabook are connected or implemented. In this case the persons who have connected/ implemented those accessories/cables have to provide assurance that the system (PC plus accessories/cables) still fulfils the required standards. To avoid in general EMC problems, the following guidance should be noted:
Only CE marked accessories should be connected/implemented. Only best shielded cables should be connected.
Working environment
This product was designed to fulfil the EMC (Electromagnetic Compatibility) requirements to be observed for so-called “residential, commercial and light industry environments”. Dynabook does not recommend the use of this product in working environments other than the above listed working environment.
For example, the following environments are not verified:
Industrial environments (e.g. environments where a mains voltage of 380 V three-phase is used) Medical environments (according to Medical Device Directive) Automotive environments Aircraft environments

User’s Manual

1-4

Any consequences resulting from the use of this product in working environments that are not verified/recommended are not the responsibility of Dynabook.
The consequences of the use of this product in non-verified working environments may be:
Interference with other devices or machines in the near surrounding area Malfunction of, or data loss from, this product caused by disturbances generated by other devices or machines in the near surrounding area
Therefore Dynabook strongly recommends that the electromagnetic compatibility of this product should be suitably tested in all non-verified working environments before use. In the case of vehicles or aircraft, the manufacturer or airline operator respectively should be asked for permission before use of this product.
Furthermore, for general safety reasons, the use of this product in environments with explosive atmospheres is not permitted.
VCCI Class B Information (Japan Only)

Canadian regulatory information (Canada only)
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulation of the Canadian Department of Communications.
Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by Dynabook could void your authority to operate this equipment.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Canadian Notice
This device complies with ISED (formerly Industry Canada) license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

User’s Manual

1-5

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. Pour être conforme aux exigences canadiennes en matière d’exposition aux fréquences radio, l’appareil et son antenne ne doivent pas être situés au même endroit qu’une autre antenne ou un autre émetteur ni fonctionner en même temps. This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. Veuillez noter que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
The above caution applies to products that operate with an 802.11a/n/ac/ax radio device. La mise en garde ci-dessus ne s’applique qu’aux appareils ayant un transmetteur opérant en mode 802.11a/n/ac/ax.

User’s Manual

1-6

Following information is only valid for EU member states:
Information requirements Regulation EC 1275/2008
Additional information as required by Regulation (EC) 1275/2008 amended by Regulation (EU) 801/2013 implementing European Ecodesign Directive with regard to requirements for standby, off mode and networked standby electric power consumption of electrical and electronic household and office equipment can be found here: http://emea.dynabook.com/environment.
Disposal of products
The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres.
The black bar indicates that the product was placed on the market after August 13, 2005.
By participating in the separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health.
For more detailed information about the collection and recycling programmes available in your country, please visit our website http://emea.dynabook.com/environment or contact your local council office or the retail outlet where you purchased the product.

User’s Manual

1-7

Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste.
If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the European Battery Directive, then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
By participating in the separate collection of batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. To achieve this you should take any battery and/or accumulator to your local recycling site, or to a retail outlet or facility that offers to collect these devices for environmentally friendly disposal, ensuring that the terminal contacts are covered by non-conductive tape.
For more detailed information about the collection and recycling programmes available in your country, please visit our website http://emea.dynabook.com/environment or contact your local council office or the retail outlet where you purchased the product.
These symbols might not stick depending on the country and region where you purchased.
REACH – Compliance Statement
The European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018.
Dynabook will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation.
Please consult the following website http://emea.dynabook.com/environment for information about the presence in our articles of substances included on the candidate list according to REACH in a concentration above 0.1 % weight by weight.

User’s Manual

1-8

Following information is only for Turkey:
Disposal of products:
The crossed wheelie bin symbol means that this product should not be collected and disposed with other household wastes. When product become waste at the end-of-life, to protect environment and human health, it should be given to nearest collection recycling or disposal center. For more information about collection and recycling programs in your country please contact your local authority or the retailer where the product was purchased.
Dynabook meets all requirements of Turkish regulation 28300 “Restriction of the use of certain hazardous substances in electrical and electronic equipment”.
AEEE Yönetmeliine Uygundur
Dynabook 28300 sayili Türkiye ”Elektrikle çalian ve elektronik ekipmanda belirli tehlikeli maddelerin kullanimiyla ilgili kisitlama” yönetmelii gereklerini tamamen yerine getirmektedir. The number of possible pixel failures of your display is defined according to ISO 9241-307 standards. If the number of pixel failures is less than this standard, they will not be counted as defect or failure. Battery is a consumption product, since the battery time depends on the usage of your computer. If the battery can not be charged at all, then it is a defect or failure. The changes in battery time is not a defect or failure.
Following information is only for India:
The use of this symbol indicates that this product may not be treated as household waste.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please visit our website https://asia.dynabook.com or contact call center (1800 200 6768).
These symbols might not stick depending on the country and region where you purchased.

User’s Manual

1-9

Video Standard Notice
THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1 AND MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (I) ENCODING VIDEO IN COMPLIANCE WITH THE ABOVE STANDARDS (“VIDEO”) AND/OR (II) DECODING AVC, VC-1 AND MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE SUCH VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE http://www.mpegla.com.
OpenSSL Toolkit License Issues
LICENSE ISSUES

The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org
OpenSSL License
————————
/*=====================================================
Copyright (c) 1998-2019 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.”
http://www.openssl.org. 4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be
used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl- core@openssl.org.

User’s Manual

1-10

5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit”
[http://www.openssl.org].
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com).
/
Original SSLeay License
———————————-
/ Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed.
If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

User’s Manual

1-11

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
“This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)”
The word ‘cryptographic’ can be left out if the routines from the library being used are not cryptographic related :-). 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:
“This product includes software written by Tim Hudson (tjh@cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.] */
FreeType License Issues
The FreeType Project LICENSE
—————————-
2006-Jan-27

User’s Manual

1-12

Copyright 1996-2002, 2006 by
David Turner, Robert Wilhelm, and Werner Lemberg
Introduction

The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project.
This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least.
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion and use of free software in commercial and freeware products alike. As a consequence, its main points are that:
We don’t promise that this software works. However, we will be interested in any kind of bug reports. (as is’ distribution) You can use this software for whatever you want, in parts or full form, without having to pay us. (royalty- free’ usage) You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must acknowledge somewhere in your documentation that you have used the FreeType code. (`credits’)
We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial products.
We disclaim all warranties covering The FreeType Project and assume no liability related to The FreeType Project.
Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We thus encourage you to use the following text:
“””
Portions of this software are copyright (C) The FreeType Project
www.freetype.org.
All rights reserved.
“””
Please replace with the value from the FreeType version you actually use.
Legal Terms

0. Definitions
————–
Throughout this license, the terms package’,FreeType Project’, and `FreeType archive’ refer to the set of files originally distributed by the

User’s Manual

1-13

authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the FreeType Project’, be they named as alpha, beta or final release. You’ refers to the licensee, or person using the project, where using’ is a generic term including compiling the project’s source code as well as linking it to form aprogram’ or executable’. This program is referred to asa program using the FreeType engine’.
This license applies to all files distributed in the original FreeType Project, including all source code, binaries and documentation, unless otherwise stated in the file in its original, unmodified form as distributed in the original archive. If you are unsure whether or not a particular file is covered by this license, you must contact us to verify this.
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below.
1. No Warranty
————–
THE FREETYPE PROJECT IS PROVIDED AS IS’ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT. 2\. Redistribution ————– This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, compile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in both source and object code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the rights granted herein, subject to the following conditions: Redistribution of source code must retain this license file (FTL.TXT’) unaltered; any additions, deletions or changes to the original files must be clearly indicated in accompanying documentation. The copyright notices of the unaltered, original files must be preserved in all copies of source files. Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the FreeType Team, in the distribution documentation. We also encourage you to put an URL to the FreeType web page in your documentation, though this isn’t mandatory.
These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If you use our work, you must acknowledge us. However, no fee need be paid to us.
3. Advertising

User’s Manual

1-14

————–
Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission.
We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising materials: FreeType Project’,FreeType Engine’, FreeType library’, or FreeType Distribution’.
As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted material, only this license, or another one contracted with the authors, grants you the right to use, distribute, and modify it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate that you understand and accept all the terms of this license.
4. Contacts
————–
There are two mailing lists related to FreeType:
freetype@nongnu.org
Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in this list if you haven’t found anything to help you in the documentation. freetype-devel@nongnu.org
Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.
Our home page can be found at http://www.freetype.org

User’s Manual

1-15

ENERGY STAR® Program
Your computer model may be ENERGY STAR® compliant. If the model you purchased is compliant, it will be listed on the following website: https://www.energystar.gov/ productfinder/product/certified-computers .
Dynabook is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency. Your computer ships with the power management options preset to a configuration that will provide the most stable operating environment and optimum system performance for both AC power and battery modes.
To conserve energy, your computer is set to enter the lowpower Sleep Mode which shuts down the system and display within 15 minutes of inactivity in AC power mode.
Dynabook recommends that you leave this and other energy saving features active, so that your computer will operate at its maximum energy efficiency. You can wake the computer from Sleep Mode by pressing the power button.
Your ENERGY STAR certified computer should be set by default to enter a low- power “sleep mode” after a period of inactivity. Simply touching the mouse or keyboard “wakes” the computer in seconds. These sleep features can save you up to $23 per year (200 kWh per year in electricity) and prevent up to 300 pounds of greenhouse gas emissions annually. To learn how to adjust or activate these sleep settings on your computer, please go to: www.energystar.gov/sleepinstructions
To activate sleep settings organization-wide quickly and easily through network tools, please go to: www.energystar.gov/powermanagement
Disposing of the computer and the computer’s battery
The computer’s battery pack is not user-accessible. Contact an authorized service provider for details regarding how to dispose of the computer and the battery pack.
Dynabook is strongly committed to reducing electronic waste. For the efficient use of resources and appropriate treatment of hazardous substances, local, state and federal regulations must be adhered to when recycling your electronic device. To learn about Dynabook’s sustainability commitment, visit: http://emea.dynabook.com/environment

User’s Manual

1-16

General Precautions
Your computer is designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.
Be certain to read the following general precautions and to note the cautions included in the text of the manual.
Provide adequate ventilation
Always make sure that your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep Mode). In this condition, observe the following:
Never cover your computer or AC adaptor with any object. Never place your computer or AC adaptor near a heat source, such as an electric blanket or heater. Never cover or block the air vents including those at the base of the computer. Always operate your computer on a hard flat surface. Using your computer on a carpet or other soft material can block the vents. Always provide sufficient space around the computer.
Overheating your computer or AC adaptor could cause system failure, computer or AC adaptor damage or a fire, possibly resulting in serious injury.
Creating a computer-friendly environment
Place the computer on a flat surface that is large enough for the computer and any other items you are using, such as a printer.
Leave enough space around the computer and other equipment to provide adequate ventilation. Otherwise, they might overheat.
To keep your computer in prime operating condition, protect your work area from:
Dust, moisture, and direct sunlight Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters Extreme heat, cold, or humidity Liquids and corrosive chemicals

User’s Manual

1-17

Stress injury
Carefully read the Instruction Manual for Safety and Comfort. It contains information on the prevention of stress injuries to your hands and wrists that can be caused by extensive keyboard use. It also includes information on work space design, posture, and lighting that can help reduce physical stress.
Heat injury
Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury. If the computer has been used for a long time, avoid direct contact with the metal plate supporting the various interface ports as this can become hot. The surface of the AC adaptor can become hot when in use, but this condition does not indicate a malfunction. If you need to transport the AC adaptor, disconnect it and let it cool before moving it. Do not lay the AC adaptor on a material that is sensitive to heat as the material could become damaged.
Pressure or impact damage
Do not apply heavy pressure to the computer or subject it to any form of strong impact as this can damage the computer’s components or otherwise cause it to malfunction.
Cleaning the computer
To help ensure long, trouble-free operation, keep the computer free of dust and dirt, and use care with all liquids around it.
Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely. In these circumstances, you should get the computer inspected by an authorized service provider in order to assess the scope of any damage. Clean the plastics of the computer using a cloth slightly dampened with water. You can clean the display screen by spraying a small amount of glass cleaner onto a soft, clean cloth and then wiping the screen gently with the cloth.
Never spray cleaner directly onto the computer or let liquid run into any part of it. Never use harsh or caustic chemical products to clean the computer.

User’s Manual

1-18

Moving the computer
While the computer is designed for flexible day-to-day usage, you should exercise a few simple precautions when moving it in order to help ensure trouble-free operation.
Make sure all disk/disc activity has ended before moving the computer. Turn off (shut down) the computer. Disconnect the AC adaptor and all peripherals before moving the computer. Close the display panel. Do not pick up the computer by its display panel. Before carrying your computer, shut it down, disconnect the AC adaptor and allow it to cool down. A failure to follow this instruction might result in minor heat injury. Do not expose the computer to rapid temperature changes (for example, in a situation where you carry the computer from a cold environment to a warm room). Do not turn on the power until condensation disappears. Be careful not to subject the computer to impact or shock. A failure to follow this instruction could result in damage to computer, computer failure, or loss of data. Never transport your computer with any cards inserted. This might damage either the computer and/or the card resulting in computer failure. Always use a suitable carry case when transporting the computer. When carrying your computer, be sure to hold it securely so that it does not fall or hit anything. Do not carry your computer by holding any of its protruding elements.
Mobile phones
Be aware that the use of mobile phones can interfere with the audio system. The operation of the computer will not be impaired in any way, but it is recommended that a minimum distance of 30 cm is maintained between the computer and a mobile phone that is in use.
Instruction Manual for Safety and Comfort
All important information on the safe and proper use of this computer is described in the enclosed Instruction Manual for Safety and Comfort. Be sure to read it before using the computer.
Safety Icons
Safety icons are used in this manual to bring important information to your attention. Each type of message is identified as follows.

User’s Manual

1-19

Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions. A caution informs you that improper use of equipment or failure to follow instructions might cause data loss, equipment damage, or might result in minor or moderate injury. Please read. A note is a hint or advice that helps you make best use of your equipment.

User’s Manual

1-20

Chapter 2
Getting Started
This chapter provides an equipment checklist, and basic information to start using your computer. If you use an operating system that was not pre-installed by Dynabook, some of the features described in this manual might not function properly.
Equipment checklist
Carefully unpack your computer, taking care to save the box and packaging materials for future use.
Hardware
Check to make sure that you have all the following items: Portable personal computer USB-CTM to Ethernet LAN Adapter USB-CTM to VGA Adapter USB-CTM to HDMITM/VGA Travel Adapter USB-CTM to VGA/LAN Adapter (provided with some models and varies depending on the model you purchased) AC adaptor and power cord (2-pin plug or 3-pin plug) Cleaning cloth (provided with some models)
Documentation
Quickstart Instruction Manual for Safety and Comfort Warranty Information If any of the items are missing or damaged, contact your dealer immediately.
Conventions
This manual uses the following formats to describe, identify, and highlight terms and operating procedures.

User’s Manual

2-1

Click Right-click Double-click Start

Tap the Touch Pad or click the left Touch Pad control button once. Left-click the mouse once. Tap the touch screen once (only for touch screen models).
Click the right Touch Pad control button once. Right-click the mouse once. Press and hold on the touch screen (only for touch screen models).
Tap the Touch Pad or click the left Touch Pad control button twice. Left-click the mouse twice. Tap the touch screen twice (only for touch screen models).
The word “Start” refers to the ” ” button on the center of the Windows taskbar.

Using your computer for the first time
Be sure to read the enclosed Instruction Manual for Safety and Comfort for information on the safe and proper use of this computer. It is intended to help you be more comfortable and productive while using a notebook computer. By following the recommendations in it, you can reduce your chance of developing a painful or disabling injury to your hand, arms, shoulders, or neck.

This section provides basic information to start using your computer. It covers the following topics:
Connecting the AC adaptor Opening the display Turning on the power Initial setup Getting to know Windows
Use a virus-check program and make sure that it is updated regularly. Never format storage media without checking its content – formatting destroys all stored data. It is a good idea to back up the internal Solid-State Drive or other main storage device to external media periodically. General storage media is not durable or stable over long periods of time and under certain conditions might result in data loss.

User’s Manual

2-2

Before you install a device or application, save any data in memory to the internal Solid-State Drive or other storage media. Failure to do so might result in data loss.
Connecting the AC adaptor
Attach the AC adaptor when you want to charge the battery or operate from AC power. The battery pack must be charged before you can operate from battery power. The AC adaptor can automatically adjust to any voltage ranging from 100 volts to 240 volts and to a frequency of either 50 hertz or 60 hertz, enabling you to use this computer in almost any country/region. The adaptor converts AC power to DC power and reduces the voltage supplied to this computer.
It is recommended to use the AC adaptor that was included with your computer, or use AC adaptors specified by Dynabook to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor might cause fire or damage to the computer, possibly resulting in serious injury. Dynabook assumes no liability for any damage caused by use of an incompatible adaptor. Never plug the AC adaptor into a power source that does not correspond to both the voltage range and the frequency specified on the regulatory label of the unit. Failure to do so might result in a fire or electric shock, possibly resulting in serious injury. Always use or purchase power cables that comply with the legal voltage and frequency specifications and requirements in the country of use. Failure to do so might result in a fire or electric shock, possibly resulting in serious injury. The supplied power cord conforms to safety rules and regulations in the region the computer is bought and should not be used outside this region. For use in other regions, buy power cords that conform to safety rules and regulations in the particular region. Do not use a 3-pin to 2-pin conversion plug. When you connect the AC adaptor to the computer, always follow the steps in the exact order as described in this User’s Manual. As a general safety precaution, avoid touching any metal parts. Never place your computer or AC adaptor on a wooden surface, furniture, or any other surface that might be marred by exposure to heat since the computer base and the surface of the AC adaptor increase in temperature during normal use. Always place your computer or AC adaptor on a flat and hard surface that is resistant to heat damage.

User’s Manual

2-3

Refer to the enclosed Instruction Manual for Safety and Comfort for detailed precautions and handling instructions. 1. Connect the power cord to the AC adaptor.
Figure 2-1 Connecting the power cord to the AC adaptor (2-pin plug)
Figure 2-2 Connecting the power cord to the AC adaptor (3-pin plug)

Either a 2-pin or 3-pin adaptor/cord is included with the computer depending on the model. 2. Plug the power cord into a live wall outlet. 3. Connect the DC output plug of the AC adaptor to one of the
ThunderboltTM 3/USB Type-CTM ports on your computer. The DC IN/ Battery indicator glows. You can also establish connection through the USB Type-CTM adapter (provided with some models). Refer to the USB Type-CTM Adapters section for more information.
Figure 2-3 Connecting the DC output plug to the computer
2
1

1. ThunderboltTM 3/USB Type-CTM port

2. DC output plug

User’s Manual

2-4

Opening the display
The display panel can be opened to a wide range of angles for optimal viewing. To open the display panel, slowly lift it with one hand holding the center of the display panel (as shown in the following figure) and the other hand holding the palm rest down so that the main body of the computer is not raised. This will allow the angle of the display panel to be adjusted to provide optimum clarity.
Figure 2-4 Opening the display panel
1

1. Display panel
Product appearance depends on the model you purchased. Open and close the display panel with reasonable care. Opening it vigorously or slamming it shut might damage the computer.
Be careful not to open the display panel too far as this might put stress on the display panel’s hinges and cause damage. Do not lift the computer by the display panel. Do not close the computer with pens or any other objects left in between the display panel and the keyboard. When opening or closing the display panel, place one hand on the palm rest to hold the computer in place and use the other hand to slowly open or close the display panel (Do not use excessive force when opening or closing the display panel). Do not press or push with excessive force on the display screen, otherwise the computer might become unsteady and possibly fall over.

User’s Manual

2-5

Turning on the power
This section describes how to turn on the power. The power indicator indicates the status. Refer to the Power Condition Descriptions section for more information.
After you turn on the power for the first time, do not turn it off until you have set up the operating system. Volume cannot be adjusted during Windows Setup. Do not touch the display screen while turning on the computer.
1. Open the display panel. 2. Press the power button.
Figure 2-5 Turning on the power
1

1. Power button
Product appearance depends on the model you purchased.
Initial setup
The Windows Startup Screen is the first screen displayed when you turn on the power. To install the operating system properly, follow the on-screen instructions on each screen.

User’s Manual

2-6

When it is displayed, be sure to read the license terms and license agreement carefully.
Getting to know Windows
For detailed information on what is new and how to operate Windows, refer to Tips in the Start menu.
Start menu
The Start menu is the launching pad for everything you can do in the Windows operating system, providing easy ways to get to your favorite apps, recent files, and a powerful search box for finding anything. You can access the Start menu from an app or the desktop in the following ways:
Click the Start button ( ) on the center of the Windows taskbar. Press the Windows® logo key ( ) on your keyboard.
Windows taskbar
By default, the bottom of the desktop is Windows taskbar. You can see all of your currently running apps on the Windows taskbar.
Task view
Task view ( ) is launched from the Windows taskbar at the bottom of the screen. Task view allows you to view the apps that are currently running. Also, you can create custom desktops so that running apps can be grouped for entertainment, productivity, or what you just want. To do this, click the Task view icon , and then click New desktop. Open the apps you want to use on that desktop. To switch between desktops, click Task view again.
Search
Search on the Windows taskbar allows you to find apps, files, settings, and more on the computer. When internet connection is available, it also shows you the best search result from the internet. The personal assistant called Cortana may be available, depending on your country/region. You can ask questions or talk to Cortana in your natural voice, and Cortana answers your questions using information from the internet. To talk with Cortana, an internal or external microphone is required.

User’s Manual

2-7

Settings
Settings provides system settings including advanced settings in the Control Panel. They are divided in categories so that you can configure, optimize, or personalize Windows. You can also type in the keyword, and use Search to find any setting. To open Settings, click Start -> Settings ( ).
Microsoft Store
Although many apps are pre-installed in your computer, you can also download many others from the Microsoft Store. You can search for and browse thousands of apps, all grouped into easyto-find categories there.
Windows Hello
Windows Hello is a more personal and secure way to sign in to your Windows system, apps, and services using fingerprint, face recognition or a PIN. To set up Windows Hello, click Start -> Settings -> Accounts -> Sign-in options. Under Sign-in options, you will see options for Face Recognition and Fingerprint if your computer has fingerprint sensor and if your computer has face recognition sensor that supports it. Once you have set up, you will be able to sign in with a quick touch or glance. You might need to add a PIN under PIN (Windows Hello) before you can set up Facial recognition (Windows Hello) and Fingerprint recognition (Windows Hello).
Sign-in options
Windows offers a number of sign-in options including Password ( ), PIN ( ), Fingerprint ( ), Face ( ) and Picture password ( ) authentication to prevent from unauthorized access. If you have multiple sign-in methods set for a user account, you can select an option on the Windows login screen by clicking sign-in options. It is highly recommended to use Windows Hello Face indoors. Operating outdoors might cause enrollment/sign-in failure due to the possible sunlight affection.
Turning off the power
The power can be turned off in one of the following modes, either Shut Down Mode, Sleep Mode or Hibernation Mode.

User’s Manual

2-8

Shut Down Mode
When you turn off the power in Shut Down Mode, no data will be saved and the computer will boot to the main screen of the operating system the next time it is turned on. 1. If you have entered data, either save it to the internal storage drive or
to other storage media. 2. Make sure all disk/disc activity has stopped before removing the disk/
disc. If you turn off the power while a disk (disc) is being accessed, you might lose data or damage the disk. Never turn off the power while an application is running. Failure to do so can cause data loss. Never turn off the power, disconnect an external storage device, or remove storage media during data read/write. Failure to do so can cause data loss.
3. Click Start -> (Power) and then select Shut down. 4. Turn off any peripheral devices connected to your computer. Do not turn the computer or peripheral devices back on immediately. Wait a short period to avoid any potential damage.
Restarting the computer
Certain conditions require that you restart the computer, for example if you change certain computer settings. To restart the computer, there are several ways this can be achieved:
Click Start -> (Power) and then select Restart. Press CTRL, ALT, and DEL simultaneously (once) to display the menu window, and then select Restart by clicking the power icon ( ) in the lower-right corner. Before restarting the computer, be sure to save your data.
Sleep Mode
If you have to interrupt your work, you are able to turn off the power without exiting from your software by placing the computer into Sleep Mode. In this mode, data is maintained in the main memory of the computer. When you turn on the power again, you can continue working right where you left off.

User’s Manual

2-9

When you have to turn off your computer aboard an aircraft or in places where electronic devices are regulated or controlled, always shut down the computer. This includes turning off any wireless communication functionalities, and canceling settings that reactivate the computer automatically, such as a timer recording function. Failure to shut down the computer in this way might allow the operating system to reactivate and run pre-programmed tasks or preserve unsaved data, which might interfere with aviation or other systems, possibly causing serious injury.
Before entering Sleep Mode, be sure to save your data. To avoid possible battery life decrease, it is recommended to remove any peripheral device connected to the computer before entering Sleep Mode. To prevent data loss, do not switch to Sleep Mode while transferring data to external media, such as USB devices, memory media, or other external memory devices.
When the AC adaptor is connected, the computer will go into Sleep Mode according to the settings in the Power Options (to access it, click Start -> All apps -> Windows Tools and double-click Control Panel. In the Control Panel window, click System and Security -> Power Options.) If the computer enters Sleep Mode while a network application is active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode. To prevent the computer from automatically entering Sleep Mode, disable Sleep Mode within the Power Options.

Benefits of Sleep Mode
The Sleep Mode feature provides the following benefits: Restores the previous working environment more rapidly than the Hibernation Mode feature. Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Sleep Mode feature. Allows the use of the panel power off feature.
Executing Sleep Mode
You can enter Sleep Mode in one of following ways:
Click Start -> (Power) and then select Sleep. Close the display panel. Note that this feature must be enabled within the Power Options.

User’s Manual

2-10

Press the power button. Note that this feature must be enabled within the Power Options.
When you turn the power back on, you can continue where you left off when you shut down the computer.
If you are operating the computer on battery power, you can lengthen the overall operating time by turning it off into Hibernation Mode. Sleep Mode consumes more power while the computer is off.

Sleep Mode limitations
Sleep Mode will not function under the following condition: Memory circuits are exposed to static electricity or electrical noise.
Hibernation Mode
The Hibernation Mode feature saves the contents of memory to the internal storage drive when the computer is turned off so that, the next time it is turned on, the previous state is restored. Note that the Hibernation Mode feature does not save the status of any peripheral devices connected to the computer.
Save your data. While entering Hibernation Mode, the computer saves the contents of memory to the internal storage drive. However, for safety sake, it is best to save your data manually. Data will be lost if you disconnect the AC adaptor before saving is completed. To prevent data loss, do not switch to Hibernation Mode while transferring data to external media, such as USB devices, memory media, or other external memory devices.

Benefits of Hibernation Mode
The Hibernation Mode feature provides the following benefits:
Saves data to the internal storage drive when the computer automatically shuts down because of a low battery condition. You can return to your previous working environment immediately when you turn on the computer. Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Hibernate feature. Allows the use of the panel power off feature.

Starting Hibernation Mode
To enter Hibernation Mode, click Start -> Hibernate.

(Power) and then select

User’s Manual

2-11

To show Hibernate in Power menu, set up according to the following steps: 1. Click Start -> All apps -> Windows Tools and double-click Control
Panel. 2. In the Control Panel window, click System and Security -> Power
Options. 3. Click Choose what the power button does or Choose what
closing the lid does. 4. Click Change settings that are currently unavailable. 5. Select the Hibernate check box from Shutdown settings. 6. Click the Save changes button.
Automatic Hibernation Mode
The computer can be configured to enter Hibernation Mode automatically when you press the power button or close the display panel. To define these settings, do the following: 1. Click Power Options and then click Choose what the power button
does or Choose what closing the lid does. 2. Enable the desired Hibernation Mode settings for When I press the
power button and When I close the lid. 3. Click the Save changes button.
Data saving in Hibernation Mode
When you turn off the power in Hibernation Mode, the computer takes a moment to save the current data in memory to the internal storage drive. After you turn off the computer, and the content of memory has been saved to the internal storage drive, turn off the power to any peripheral devices. Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge.
System Recovery
There is a hidden partition allocated on the internal storage drive for the System Recovery Options in the event of a problem. You can also create recovery media and restore the system. The following items are described in this section:
Creating Recovery Media Restoring the pre-installed software from your created Recovery Media Restoring the pre-installed software from the Recovery Partition

User’s Manual

2-12

If you choose dynabook Maintenance Utility to erase the internal storage drive, all data including the operating system and recovery partition will be deleted. In that case, you cannot create recovery media or restore the preinstalled software from the recovery partition. Make sure that you have already created recovery media before you start dynabook Maintenance Utility. This recovery media can be used to restore your system after you have erased your internal storage drive.
Creating Recovery Media
This section describes how to create Recovery Media. Be sure to connect the AC adaptor when you create Recovery Media. Be sure to close all other software programs. Do not run software such as screen savers which can put a heavy load on the CPU. Operate the computer at full power. Do not use power-saving features. Do not write to the media when the virus check software is running. Wait for it to finish, then disable virus detection programs including any software that checks files automatically in the background. Do not use utilities, including those intended to enhance internal storage drive access speed. They might cause unstable operation and damage data. Do not shut down/log off or Sleep/Hibernate while writing or rewriting the media. Set the computer on a level surface and avoid places subjected to vibrations such as airplanes, trains, or cars. Do not use on an unstable surface such as a stand.
A recovery image of the software on your computer is stored on the internal storage drive, and can be copied to either disc media or USB Flash Memory by using the following steps: 1. Select either blank disc or USB Flash Memory.
The application allows you to choose from a variety of different media onto which the recovery image can be copied including disc media and USB Flash Memory. Some of the disc media might not be compatible with the optical disc drive connected to your computer. You should therefore verify that the optical disc drive supports the blank media you have chosen before proceeding.

User’s Manual

2-13

USB Flash Memory will be formatted and all the data in the USB Flash Memory will be lost when proceeding.
2. Turn on your computer and allow it to load the Windows operating system from the internal storage drive as normal.
3. Insert the first blank disc into the external optical disc drive tray, or insert the USB Flash Memory into one available USB port.
4. Click Start -> All apps -> Windows Tools and double-click Control Panel. In the Control Panel window, click System and Security -> Security and Maintenance -> Recovery -> Create a recovery drive.
5. Follow the on-screen instructions to finish creating the Recovery Media.
dynabook Recovery Wizard option in dynabook Maintenance Utility will not exist if you restore the computer from the recovery media you created by recovery drive creating option in Windows system.
Restoring the pre-installed software from your created Recovery Media
If the pre-installed files are damaged, you are able to use the Recovery Media you have created to restore the computer to the state it was in when you originally received it. To perform this restoration, do the following:
Make sure that the AC adaptor is connected during the restoring process. Do not close the display panel during the restoring process.
When you reinstall the Windows operating system, the internal storage drive will be reformatted and all data will be lost. If your model has fingerprint function, before you reinstall the Windows operating system, delete the registered fingerprints. Otherwise, the same fingerprints cannot be registered after the reinstallation.
1. Load the Recovery Media into the external optical disc drive or insert the recovery USB Flash Memory into one available USB port.
2. Click Start -> (Power) and then select Restart. 3. Hold down the F12 key and then release this key just after the
computer is powered on. 4. Use the up and down cursor key to select the appropriate option from
the menu according to your actual recovery media. 5. A menu is displayed from which you should follow the on-screen
instructions. If you have previously chosen to remove the recovery partition without creating Recovery Media, the Recovery Media cannot be created.

User’s Manual

2-14

However, if you have already created a Recovery Media, you can use it to restore the recovery partition. If you have not created Recovery Media, contact Technical Support for assistance.
Restoring the pre-installed software from the Recovery Partition
A portion of the total internal storage drive space is configured as a hidden recovery partition. This partition stores files which can be used to restore pre-installed software in the event of a problem. If you set up your internal storage drive again later, do not change, delete, or add partitions in a manner other than specified in the manual, otherwise you might find that space for the required software is not available. In addition, if you use a third- party partitioning program to reconfigure the partitions on your internal storage drive, you might find that it becomes impossible to set up your computer.
Make sure that the AC adaptor is connected during the restoring process. Do not close the display panel during the restoring process.
When you reinstall the Windows operating system, the internal storage drive will be reformatted and all data will be lost. If your model has fingerprint function, before you reinstall the Windows operating system, delete the registered fingerprints. Otherwise, the same fingerprints cannot be registered after the reinstallation.
1. Click Start -> (Power) and then select Restart. 2. Hold down 0 (zero) key and then release this key just after the
computer is powered on. 3. Select Troubleshoot -> dynabook Maintenance Utility ->
dynabook Recovery Wizard. 4. Follow the on-screen instructions to finish the recovery.

User’s Manual

2-15

Chapter 3
The Grand Tour
This chapter identifies the various components of the computer. It is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, refer to the Legal Footnotes section.
Handle your computer carefully to avoid scratching or damaging the surface.
Front with the display closed
The following figure shows the front of the computer with the display panel in the closed position.
Figure 3-1 Front of the computer with display panel closed

1
1. Stereo speakers 2. DC IN/Battery indicator

2

3

1

3. Power indicator

Product appearance depends on the model you purchased.

Stereo speakers

The speakers emit sound generated by your software as well as audio alarms, such as low battery condition, generated by the system.

DC IN/Battery indicator

The DC IN/Battery indicator shows the condition of the DC IN and the battery charge status. White indicates that the battery is fully charged while the power is being correctly supplied from the AC power adaptor.
Refer to the Power Condition Descriptions section for more information on this feature.

User’s Manual

3-1

Power indicator

The power indicator normally glows white when the computer is turned on.

Left side
The following figures show the left side of the computer. Figure 3-2 The left side of the computer

1

2

3

4

1

2 234

1. Security lock slot

3. Headphone/Microphone jack

2. Universal Serial Bus (USB 3.2 Gen1) 4. SIM card slot*

port

• Provided with some models. Product appearance depends on the model you purchased.

Security lock slot

A security cable can be attached to this slot and then connected to a desk or other large object in order to deter theft of the computer.

Universal Serial Bus (USB 3.2 Gen1) port

One or two Type-A Universal Serial Bus ports, which comply to the USB 3.2 standard, are provided on the left side of the computer.
The USB 3.2 port is compliant with USB 3.2 Gen1 standard and backward compatible with USB 2.0 devices.
The port with the icon ( ) has Power Off and Charge function.

Note that it is not possible to confirm the operation of all functions of all USB devices that are available. Some functions associated with a specific device might not operate properly. Before removing a USB device from the USB port of your computer, click the Safely Remove Hardware and Eject Media icon on the Windows Taskbar, and then select the USB device that you want to remove.

User’s Manual

3-2

Keep foreign metal objects, such as screws, staples, and paper clips, out of the USB port. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.

Headphone/ Microphone jack
SIM card slot

A 3.5 mm mini headphone/microphone jack enables connection of a monaural microphone, stereo headphones, or a headset.
This slot allows you to insert a SIM card which enables a high-speed access to the internet, corporate intranet and your email while you are away from office. Refer to the Wireless WAN Device section for more information. Some models are equipped with the SIM card slot.

Right side
The following figure shows the right side of the computer. Figure 3-3 The right side of the computer

1
1. Smart Card slot* 2. Memory media slot

2

3

3

4

3. ThunderboltTM 3/USB Type-CTM port 4. HDMITM out port

• Provided with some models. Product appearance depends on the model you purchased.

Smart Card slot

This slot allows you to install a Smart Card device. Some models are equipped with a Smart Card slot.

Memory media slot

This slot lets you insert a micro SDTM/SDHCTM/ SDXCTM memory card. Refer to the Memory media section for more information.

Keep foreign metal objects, such as screws, staples, and paper clips, out of the Memory media slot. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.

User’s Manual

3-3

ThunderboltTM 3/USB Type-CTM port

Two ThunderboltTM 3/USB Type-CTM ports, which support ThunderboltTM 3 and USB 3.2 Gen2, are provided on the right side of the computer.
This port supports USB data transmission, video output (audio stream can be included) and USB Power Delivery.
The AC adaptor connects to this port in order to power the computer and charge the battery. It is recommended to use the AC adaptor that was included with your computer, or use AC adaptors specified by Dynabook. Use of an incompatible AC adaptor might cause fire or damage to the computer possibly resulting in serious injury.

Note that it is not possible to confirm the operation of all functions of all ThunderboltTM devices/USB devices that are available. Some functions associated with a specific device might not operate properly. Before removing a USB device from the ThunderboltTM 3/USB TypeCTM port of your computer, click the Safely Remove Hardware and Eject Media icon on the Windows Taskbar, and then select the USB device that you want to remove.

Keep foreign metal objects, such as screws, staples, and paper clips, out of the ThunderboltTM 3/USB Type-CTM port. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.

HDMITM out port

HDMITM out port can connect with Type A connector HDMITM cable.

Back

The following figure shows the back of the computer. Figure 3-4 The back of the computer

1

1

1. Cooling vents

Product appearance depends on the model you purchased.

Cooling vents

The cooling vents help the processor to avoid overheating.

User’s Manual

3-4

Do not block the cooling vents. Keep foreign metal objects, such as screws, staples, and paper clips, out of the cooling vents. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Carefully clean the dust on the surface of the cooling vents using a soft cloth.

Underside
The following figure shows the underside of the computer. Ensure that the display is closed before the computer is turned over to avoid causing any damage.
Figure 3-5 The underside of the computer

1

1

2

2

1. Cooling vents

2. Stereo speakers

Product appearance depends on the model you purchased.

Cooling vents

The cooling vents help the processor to avoid overheating.

Do not block the cooling vents. Keep foreign metal objects, such as screws, staples, and paper clips, out of the cooling vents. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Carefully clean the dust on the surface of the cooling vents using a soft cloth.

Stereo speakers

The speakers emit sound generated by your software as well as audio alarms, such as low battery condition, generated by the system.

User’s Manual

3-5

Front with the display open (PORTEGE X30-F/ TECRA X40-F)
This section shows the computer with the display panel open. In order to open the display, lift up the display panel and position it at a comfortable viewing angle for you.
Figure 3-6 The front of the computer with the display panel open

3 4
2
1

5 6 4

7

7

8

9 12 13

16

17

17

15

10

9

11

1. Infrared LED 2. Face recognition sensor 3. Infrared LED 4. Microphones 5. Web Camera LED 6. Web Camera 7. Wireless communication antennas (not shown) 8. Display screen 9. Display hinges

14
10. Power button 11. Power button ring LED 12. Keyboard 13. Touch Pad 14. Touch Pad control buttons 15. Fingerprint sensor* 16. AccuPoint
17. AccuPoint control buttons

• Provided with some models. Product appearance depends on the model you purchased.

Infrared LED
Face recognition sensor

The infrared LED blinks when Windows Hello Face is operating.
Some models are equipped with infrared LEDs.
Face recognition sensor captures the face image for the operating system for enrolling and signing in. For more information, refer to the on-screen instructions in Windows Hello.
Some models are equipped with a face recognition sensor.

User’s Manual

3-6

It is highly recommended to use Windows Hello Face indoors. Operating outdoors might cause enrollment/sign-in failure due to the possible sunlight affection. Do not point the face recognition sensor directly at the sun. Do not touch or press strongly on the face recognition sensor lens and infrared LEDs. Failure to do so might incorrectly recognize faces. Use an eyeglass cleaner (cleaner cloth) or other soft cloth to clean the lens and the LEDs if it becomes dirty. When enrolling your face to Windows Hello, please make sure that there is no other face in preview of Windows Hello setup dialog. While Face recognition sensor is capturing your face, make sure that your face is in front of the sensor and you look directly at it.

Microphone Web Camera LED Web Camera

The built-in microphone allows you to record sounds for your application. Refer to the Sound System and Video mode section for more information.
Some models are equipped with a microphone.
The Web Camera LED glows when the Web Camera is operating.
Some models are equipped with a Web Camera LED.
Web Camera is a device that allows you to record video or take photographs with your computer. You can use it for video chatting or video conferences using a communication tool.
Some models are equipped with a Web Camera.

Do not point the web camera directly at the sun. Do not touch or press strongly on the web camera lens. Failure to do so might reduce image quality. Use an eyeglass cleaner (cleaner cloth) or other soft cloth to clean the lens if it becomes dirty.

Wireless communication antennas

Depending on the configuration of your computer, one of the following antennas are builtin:
Wireless LAN/Bluetooth® Wireless WAN/Wireless LAN/Bluetooth®

Do not cover the wireless communication antennas area with any metal objects, otherwise the wireless function might not work.

User’s Manual

3-7

Legal Footnote (Wireless LAN)
For more information regarding Wireless LAN, refer to the Legal Footnotes section.

Display screen

33.8 cm (13.3″) or 35.6 cm (14.0″) LCD screen, is configured with one of the following resolutions depending on the model you purchased:
HD, 1366 horizontal x 768 vertical pixels FHD, 1920 horizontal x 1080 vertical pixels
Be aware that, when the computer is operating on the AC adaptor, the image displayed on the internal screen is somewhat brighter than when it operates on battery power. This difference in brightness levels is intended to save power when operating on battery.

Legal Footnote (LCD) For more information regarding LCD, refer to the Legal Footnotes section.

Display hinges Power button Power button ring LED Keyboard
Touch Pad

The display hinges allow the display panel to be positioned at a variety of easy-to-view angles.
Press this button to turn the computer’s power on or off.
The power button ring LED normally glows white when the computer is turned on.
The keyboard contains character keys, control keys, function keys, and special Windows keys, providing all the functionality of a full-size keyboard. Refer to the The Keyboard section for details.
The Touch Pad located in the palm rest is used to control the movement of the mouse pointer.
To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the mouse pointer to go.

User’s Manual

3-8

Touch Pad control buttons
Fingerprint sensor
AccuPoint AccuPoint control buttons

The two buttons located on the bottom of the Touch Pad are used like the buttons on a standard mouse. Press the left button to select a menu item or to manipulate text or graphics designated by the mouse pointer, and press the right button to display a menu or other function depending on the software you are using.
This sensor enables you to enroll and sign in with a fingerprint in Windows Hello. For more information, refer to the on-screen instructions in Windows Hello.
Some models are equipped with a fingerprint sensor.
A pointer control device located in the center of the keyboard is used to control the on-screen pointer.
Control buttons below the keyboard let you select menu items or manipulate text and graphics designated by the on-screen pointer.

Front with the display open (PORTEGE X30-G/ PORTEGE X40-G)
This section shows the computer with the display panel open. In order to open the display, lift up the display panel and position it at a comfortable viewing angle for you.

User’s Manual

3-9

Figure 3-7 The front of the computer with the display panel open

2

1

3

5

4

5

6

6

7

8 11 12

15

16

16

14

9

8

10

1. Infrared LED 2. Web Camera 3. Web Camera Shutter 4. Web Camera LED 5. Microphones 6. Wireless communication antennas (not shown) 7. Display screen 8. Display hinges

13
9. Power button 10. Power button ring LED 11. Keyboard 12. Touch Pad 13. Touch Pad control buttons 14. Fingerprint sensor*
15. AccuPoint 16. AccuPoint control buttons

• Provided with some models. Product appearance depends on the model you purchased.

Infrared LED Web Camera

The infrared LED blinks when Windows Hello Face is operating.
Only models which support face recognition feature are equipped with the infrared LED.
Web Camera is a device that allows you to record video or take photographs with your computer. You can use it for video chatting or video conferences using a communication tool.
The Web Camera available on some models can support face recognition feature for Windows Hello. For more information, refer to the onscreen instructions in Windows Hello.

Do not point the web camera directly at the sun.

User’s Manual

3-10

Do not touch or press strongly on the web camera lens and infrared LED. Failure to do so might reduce image quality, possibly resulting in recognizing faces incorrectly. Use an eyeglass cleaner (cleaner cloth) or other soft cloth to clean the lens and the LED if it becomes dirty. It is highly recommended to use Windows Hello Face indoors. Operating outdoors might cause enrollment /sign-in failure due to the possible sunlight affection. When enrolling your face to Windows Hello, please make sure that there is no other face in preview of Windows Hello setup dialog. While web camera is capturing your face, make sure that your face is in front of the web camera and you look directly at it.

Web Camera Shutter Web Camera LED
Microphone
Wireless communication antennas

The Web Camera Shutter can be used to protect your privacy, by sliding towards left to cover the Web Camera lens.
The Web Camera LED glows when the Web Camera is operating.
Some models are equipped with a Web Camera LED.
The built-in microphone allows you to record sounds for your application. Refer to the Sound System and Video mode section for more information.
Some models are equipped with a microphone.
Depending on the configuration of your computer, one of the following antennas are builtin:
Wireless LAN/Bluetooth® Wireless WAN/Wireless LAN/Bluetooth®

Do not cover the wireless communication antennas area with any metal objects, otherwise the wireless function might not work.

Legal Footnote (Wireless LAN)
For more information regarding Wireless LAN, refer to the Legal Footnotes section.

User’s Manual

3-11

Display screen

33.8 cm (13.3″) or 35.6 cm (14.0″) LCD screen, is configured with one of the following resolutions depending on the model you purchased:
HD, 1366 horizontal x 768 vertical pixels FHD, 1920 horizontal x 1080 vertical pixels
Some models in this series are equipped with Privacy Display screen. The privacy display can be turned ON/OFF by pressing the FN + D keys.
Be aware that, when the computer is operating on the AC adaptor, the image displayed on the internal screen is somewhat brighter than when it operates on battery power. This difference in brightness levels is intended to save power when operating on battery.

Legal Footnote (LCD) For more information regarding LCD, refer to the Legal Footnotes section.

Display hinges Power button Power button ring LED Keyboard
Touch Pad
Touch Pad control buttons

The display hinges allow the display panel to be positioned at a variety of easy-to-view angles.
Press this button to turn the computer’s power on or off.
The power button ring LED normally glows white when the computer is turned on.
The keyboard contains character keys, control keys, function keys, and special Windows keys, providing all the functionality of a full-size keyboard. Refer to the The Keyboard section for details.
The Touch Pad located in the palm rest is used to control the movement of the mouse pointer.
To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the mouse pointer to go.
The two buttons located on the bottom of the Touch Pad are used like the buttons on a standard mouse. Press the left button to select a menu item or to manipulate text or graphics designated by the mouse pointer, and press the right button to display a menu or other function depending on the software you are using.

User’s Manual

3-12

Fingerprint sensor
AccuPoint AccuPoint control buttons

This sensor enables you to enroll and sign in with a fingerprint in Windows Hello. For more information, refer to the on-screen instructions in Windows Hello.
Some models are equipped with a fingerprint sensor.
A pointer control device located in the center of the keyboard is used to control the on-screen pointer.
Control buttons below the keyboard let you select menu items or manipulate text and graphics designated by the on-screen pointer.

Front with the display open (TECRA X50-F/ PORTEGE X50-G)
This section shows the computer with the display panel open. In order to open the display, lift up the display panel and position it at a comfortable viewing angle for you.

User’s Manual

3-13

Figure 3-8 The front of the computer with the display panel open

2

1

3

5

4

5

6

6

8

9 12 13

16
17 15

7 9 10
11 17

1. Infrared LED 2. Web Camera 3. Web Camera Shutter 4. Web Camera LED 5. Microphones 6. Wireless communication antennas (Wireless WAN) (not shown)* 7. Wireless communication antennas (Wireless LAN) (not shown) 8. Display screen 9. Display hinges

14
10. Power button 11. Power button ring LED 12. Keyboard 13. Touch Pad 14. Touch Pad control buttons 15. Fingerprint sensor*
16. AccuPoint
17. AccuPoint control buttons

• Provided with some models. Product appearance depends on the model you purchased.

Infrared LED Web Camera

The infrared LED blinks when Windows Hello Face is operating.
Only models which support face recognition feature are equipped with the infrared LED.
Web Camera is a device that allows you to record video or take photographs with your computer. You can use it for video chatting or video conferences using a communication tool.
The Web Camera available on some models can support face recognition feature for Windows Hello. For more information, refer to the onscreen instructions in Windows Hello.

User’s Manual

3-14

Do not point the web camera directly at the sun. Do not touch or press strongly on the web camera lens and infrared LED. Failure to do so might reduce image quality, possibly resulting in recognizing faces incorrectly. Use an eyeglass cleaner (cleaner cloth) or other soft cloth to clean the lens and the LED if it becomes dirty. It is highly recommended to use Windows Hello Face indoors. Operating outdoors might cause enrollment/sign-in failure due to the possible sunlight affection. When enrolling your face to Windows Hello, please make sure that there is no other face in preview of Windows Hello setup dialog. While web camera is capturing your face, make sure that your face is in front of the web camera and you look directly at it.

Web Camera Shutter Web Camera LED
Microphone
Wireless communication antennas

The Web Camera Shutter can be used to protect your privacy, by sliding towards left to cover the Web Camera lens.
The Web Camera LED glows when the Web Camera is operating.
Some models are equipped with a Web Camera LED.
The built-in microphone allows you to record sounds for your application. Refer to the Sound System and Video mode section for more information.
Some models are equipped with a microphone.
Depending on the configuration of your computer, one of the following antennas are builtin:
Wireless LAN/Bluetooth® Wireless WAN/Wireless LAN/Bluetooth®

Do not cover the wireless communication antennas area with any metal objects, otherwise the wireless function might not work.

Legal Footnote (Wireless LAN)
For more information regarding Wireless LAN, refer to the Legal Footnotes section.

User’s Manual

3-15

Display screen

39.6 cm (15.6″) LCD screen, is configured with one of the following resolutions depending on the model you purchased:
FHD, 1920 horizontal x 1080 vertical pixels UHD, 3840 horizontal x 2160 vertical pixels
Be aware that, when the computer is operating on the AC adaptor, the image displayed on the internal screen is somewhat brighter than when it operates on battery power. This difference in brightness levels is intended to save power when operating on battery.

Legal Footnote (LCD) For more information regarding LCD, refer to the Legal Footnotes section.

Display hinges Power button Power button ring LED Keyboard
Touch Pad
Touch Pad control buttons

The display hinges allow the display panel to be positioned at a variety of easy-to-view angles.
Press this button to turn the computer’s power on or off.
The power button ring LED normally glows white when the computer is turned on.
The keyboard contains character keys, control keys, function keys, and special Windows keys, providing all the functionality of a full-size keyboard. Refer to the The Keyboard section for details.
The Touch Pad located in the palm rest is used to control the movement of the mouse pointer.
To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the mouse pointer to go.
The two buttons located on the bottom of the Touch Pad are used like the buttons on a standard mouse. Press the left button to select a menu item or to manipulate text or graphics designated by the mouse pointer, and press the right button to display a menu or other function depending on the software you are using.

User’s Manual

3-16

Fingerprint sensor
AccuPoint AccuPoint control buttons

This sensor enables you to enroll and sign in with a fingerprint in Windows Hello. For more information, refer to the on-screen instructions in Windows Hello.
Some models are equipped with a fingerprint sensor.
A pointer control device located in the center of the keyboard is used to control the on-screen pointer.
Control buttons below the keyboard let you select menu items or manipulate text and graphics designated by the on-screen pointer.

Internal Hardware Components

This section describes the internal hardware components of your computer.
The actual specifications might vary depending on the model you purchased.

CPU

The processor type varies depending on model.
To check which type of processor is included in your model, click Start -> All apps -> dynabook PC Information.

Legal Footnote (CPU) For more information regarding CPU, refer to the Legal Footnotes section.

Internal Storage Drive The capacity of the internal storage drive varies depending on the model. Note that part of the internal storage drive overall capacity is reserved as administration space.
Your computer is equipped with a “Solid-State Drive (SSD)”. In this manual, the word “internal storage drive” refers to SSD unless otherwise stated. SSD is a large-capacity storage device which uses Solid-State Memory in place of a magnetic disk of the hard disk.
Under certain unusual conditions of prolonged non-use and/or exposure to high temperatures, the SSD might be vulnerable to data retention errors.

Legal Footnote (Internal Storage Drive Capacity)

User’s Manual

3-17

For more information regarding Internal Storage Drive Capacity, refer to the Legal Footnotes section.

Power Condition Descriptions
The computer operating capability and battery charge status are affected by different power conditions, including whether an AC adaptor is connected and what the battery charge level is.

DC IN/Battery indicator

Check the DC IN/Battery indicator to determine the status of the battery pack and the power status with the AC adaptor connected. The following
indicator conditions should be noted:

Flashing Amber Amber White Flashing White
No light

The battery charge is low. The AC adaptor must be connected to recharge the battery.
Indicates that the AC adaptor is connected and the battery is charging.
Indicates that the AC adaptor is connected and the battery is fully charged.
Indicates a problem with the computer. Disconnect the AC adaptor for several seconds, and then reconnect the AC adaptor. After that, press the power button. If it still does not operate properly, you should contact your reseller or dealer.
Under any other conditions, the indicator does not light.

If the battery pack becomes too hot while it is being charged, the charge stops and the DC IN/Battery indicator goes out. When the temperature of the battery pack falls to a normal range, charging will resume. This process occurs regardless of whether the computer’s power is on or off.

Power indicator

Check the Power indicator to determine the power status of the computer. The following indicator conditions should be noted:

White No light

Indicates that power is being supplied to the computer, and the computer is turned on.
Under any other conditions, the indicator does not light.

User’s Manual

3-18

Chapter 4

Operating Basics

This chapter describes the basic operations of your computer, and highlights the precautions that must be taken when using it.

Using the Touch Screen

Some models are equipped with a touch screen.
You can use your finger to manipulate icons, buttons, menu items, the onscreen keyboard, and other items on the touch screen.

Tap

Simply tap your finger once on the touch screen

to activate an item, such as an app.

Press and hold Pinch or stretch Rotate Slide

Press your finger down and leave it there for a few seconds. This shows information to help you learn more about an item or opens a menu specific to what you are doing.
Touch the screen or an item with two fingers, and then move the fingers toward each other (pinch) or away from each other (stretch). This shows different levels of information or visually zooms in or out.
Put two fingers on an item and then turn your hand to rotate things in the direction you turn your hand. Only some items can be rotated.
Drag your finger on the touch screen to move through what is on the screen.

Swipe

Quickly move your finger in from the edge of the screen, without pausing when you first touch it.
Swipe from the left edge: shows your widgets.
Swipe from the right edge: opens the Notification center.

User’s Manual

4-1

For details and more advanced touch screen gestures to interact with Windows operating system, refer to Tips in the Start menu.
Do not press or push with excessive force on the touch screen. Do not apply excessive force when cleaning the touch screen. Never touch the screen with a sharp object such as a ball-point pen which might scratch or damage the surface. Do not use a protecting sheet for the touch screen as it might decrease its sensitivity to gestures. Do not touch the screen with gloves, wet hands, or the tip of your fingernails as it might decrease the sensitivity. The touch screen might not work correctly if part of the surface is slightly wet, or covered with an object.

Using the Touch Pad

The Touch Pad on the palm rest might support the following gestures:

Tap

Tap once on the Touch Pad to activate an item,

such as an app.

Two-Finger Tap Pinch or stretch Two-Finger Scroll Three-Finger Tap

Tap once on the Touch Pad with two fingers together to display a menu or other function depending on the software you are using. (Similar to right-click)
Place two fingers down on the Touch Pad and move them toward each other (pinch) or away from each other (stretch). This shows different levels of information or visually zooms in or out.
Place two fingers down and slide them vertically or horizontally from anywhere on the Touch Pad. This allows you to operate the scroll bars of a window.
Tap once on the Touch Pad with three fingers together to open Windows Search.

User’s Manual

4-2

Three-Finger Scroll

Place three fingers down and slide them vertically or horizontally from anywhere on the Touch Pad.
Slide towards left/right: switches between your open apps. Slide your fingers slowly across the Touch Pad to flip through them all.
Slide up: views all your open apps in task view.
Slide down: shows the desktop.

Four-Finger Tap

Tap once on the Touch Pad with four fingers together to open the Notification center.

Four-Finger Scroll

Place four fingers down and slide them vertically or horizontally from anywhere on the Touch Pad.
Slide towards left/right: switches between virtual desktops.
Slide up: views all your open apps in task view.
Slide down: shows the desktop.

Do not put items on the Touch Pad surface to prevent abnormal action.

Some of the Touch Pad operations described in this section are only supported in certain applications.

Pointing Device
AccuPoint
To use the AccuPoint, simply push it with your finger tip in the direction you want to move the on-screen pointer.
The control buttons below the AccuPoint are used like the buttons on a standard mouse. Press the left button to select a menu item or to manipulate text or graphics designated by the pointer, and press the right button to display a menu or other function depending on the software you are using.
Some models are equipped with an AccuPoint.

User’s Manual

4-3

Figure 4-1 AccuPoint

1

2

3

1. AccuPoint 2. AccuPoint left control button

3. AccuPoint right control button

Product appearance depends on the model you purchased.

AccuPoint precautions
Certain conditions can affect the on-screen pointer when using AccuPoint. For example, the pointer might travel contrary to AccuPoint operation or an error message might appear, if
You touch the AccuPoint during power-up. You apply constant, soft pressure during power-up. There is a sudden temperature change. Strong stress is applied to the AccuPoint.
If an error message appears, reboot the computer. If an error message does not appear, wait a moment for the pointer to stop, then continue operation.

Replacing the cap
The AccuPoint cap is an expendable item that should be replaced after prolonged use. 1. To remove the AccuPoint cap, gently dig the cap out (with finger).

User’s Manual

4-4

Figure 4-2 Removing the AccuPoint cap

Product appearance depends on the model you purchased. 2. Position a new cap on the peg. Be careful to let the peg inserted into
the round groove inside the new cap and then press it into place. You can buy replacement AccuPoint caps from authorized dealer. AccuPoint cap is a removable part. Always use the AccuPoint with reasonable care.
The Keyboard
The number of keys available on your keyboard depends on which country/ region your computer is configured for, with keyboards being available for numerous languages. There are different types of keys, specifically typewriter keys, function keys, Windows special keys, and the keypad overlay. Never remove the key caps on your keyboard. Failure to do so might damage the parts under the key caps.
Keyboard indicator
The following figure shows the position of the CAPS LOCK indicator. When the CAPS LOCK indicator glows, the keyboard produces capitals when any letter is typed.

User’s Manual

4-5

Figure 4-3 CAPS LOCK indicator
1

1. CAPS LOCK indicator

Product appearance depends on the model you purchased.

CAPS LOCK

This indicator glows green when letter keys are locked into their uppercase format.

Function Keys
The function keys (F1 ~ F12) are the 12 keys at the top of your keyboard.

Function keys let you enable or disable certain features of the computer. The functions can be performed by pressing the associated function keys.

Key Combination Function

FN + F1

Enters ”Lock computer mode”. To restore your desktop, you need to log on again.

FN + F2

Switches between the power plans.

FN + F3

Switches the system to Sleep Mode.

FN + F4

Turns the Microphone mute on or off.

FN + F5

Changes the active display device.
To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.

FN + F6

Decreases the brightness of the display panel in individual steps.

FN + F7

Increases the brightness of the display panel in individual steps.

FN + F8

Turns the Airplane mode on or off.

FN + F9

Enables or disables the Touch Pad.

User’s Manual

4-6

Key Combination FN + F10 FN + F11 FN + F12 FN + ESC FN + 1
FN + 2
FN + 3 FN + 4 FN + Space FN + S
FN + Z ( )

Function
Turns on Arrow Mode.
Turns on Numeric Mode.
Locks the cursor on a specific line.
Turns the playback sound on or off.
Reduces the icon size on the desktop or the font sizes within one of the supported application windows.
Enlarges the icon size on the desktop or the font sizes within one of the supported application windows.
Decreases the playback volume of the computer.
Increases the playback volume of the computer.
Changes the display resolution.
Allows you to search your computer, the web, or within an app.
Toggles the mode of the keyboard backlight between Timer, On, and Off. To set up the brightness, click Start -> All apps -> dynabook Settings. Click Keyboard tab, and select a level under Keyboard Backlight Brightness Control. To set up the timer, launch the dynabook Setup Utility, select Power Management -> Keyboard Backlight Control Mode, and select TIMER. Adjust the timer under Backlight Lighting Time. This function is supported with some models.

Some functions show the toast notification at the edges of the screen. Those toast notifications are enabled by default. You can disable them in dynabook Settings. To access it, click Start -> All apps -> dynabook Settings -> Keyboard.

Windows special keys
The keyboard provides two keys that have special functions in Windows, the Windows® logo key activates the Start menu while the application key has the same function as the secondary (right) mouse button.

User’s Manual

4-7

This key activates the Windows Start menu.
This key has the same function as the secondary (right) mouse button.
Using the Fingerprint Sensor
Some models are equipped with the fingerprint sensor for the purpose of enrolling and recognizing fingerprints. Lightly touch and rest your finger on the fingerprint sensor to recognize fingerprints. During enrollment, you might need to touch and lift your finger on the sensor repeatedly until setup is complete. Follow the on-screen instructions to finish the setup. By enrolling the ID and password onto the fingerprint authentication feature, it is no longer necessary to input the password from the keyboard. Fingerprint feature enables you to:
Sign-in to Windows (Provided with some models) Authentication of the User Password (and, if applicable, the HDD/SSD Password) when booting up the computer (Pre-Boot authentication) (Provided with some models) Single Sign-On feature
Figure 4-4 Using the fingerprint sensor

1 1
1. Fingerprint sensor Fingerprint cannot be used in models that do not have a fingerprint function. Total fingerprints which can be registered are 10 pcs per account.

Points to note about the Fingerprint Sensor
Be aware of the following considerations when using the fingerprint sensor. A failure to follow these guidelines might result in damage to the sensor, sensor failure, fingerprint recognition problems or a lower fingerprint recognition success rate.
Do not scratch or poke the sensor with your nails or any hard or sharp objects.

User’s Manual

4-8

Do not press the sensor strongly. Do not touch the sensor with a wet finger or any wet objects. Keep the sensor surface dry and free from water vapor. Do not touch the sensor with a soiled or dirty finger as minute foreign particles of dust and dirt might scratch it. Do not paste stickers or write on the sensor. Do not touch the sensor with a finger or any other object which might have a build-up of static electricity on it.
Observe the following before you place your finger on the sensor whether for fingerprint enrollment/registration or recognition:
Wash and dry your hands thoroughly. Remove static electricity from your fingers by touching any metal surface. Static electricity is a common cause of sensor failures, especially when the weather is dry. Clean the sensor with a lint-free cloth. Do not use detergent or any other chemicals to clean the sensor. Avoid the following finger conditions for enrollment or recognition as they might result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate:
Soaked or swollen finger, for example as might occur after taking a bath Injured finger Wet finger Soiled or oily finger Extremely dry skin condition on finger
Observe the following to improve the fingerprint recognition success rate:
Enroll two or more fingers. Enroll additional fingers if a recognition failure often occurs when using already enrolled fingers. Check the condition of your finger. Any conditions which have changed since enrollment, such as injury, rough skin, and extremely dry, wet, soiled, dirty, oily, soaked or swollen fingers, might lower the recognition success rate. Also if the fingerprint is worn down or the finger becomes thinner or fatter, the recognition success rate might be lowered. As the fingerprint for each finger is different and unique, you should ensure that only the registered or enrolled fingerprint or fingerprints are used for identification. The fingerprint sensor compares and analyzes the unique characteristics in a fingerprint. However, there might be instances where certain users are unable to register their fingerprints due to insufficient unique characteristics in their fingerprints. The recognition success rate might differ from user to user.

User’s Manual

4-9

Battery
This section explains battery types, use, recharging methods and handling.
Battery pack
When the AC adaptor is not connected, the main power source of the computer is a lithium ion battery pack, also referred to in this manual as the main battery.
Real-Time Clock (RTC) function
The Real-Time Clock (RTC) function is supported. The main battery provides power for the internal real-time clock and calendar function and also maintains the system configuration while the computer is turned off. If the RTC lasting time completely runs out, the system will lose this information and the real-time clock and calendar will stop working. You can change the Real-Time Clock settings in the dynabook Setup Utility. Refer to Real-Time Clock for further information.
Care and use of the battery pack
This section provides the important safety precautions in order to handle your battery pack properly. Refer to the enclosed Instruction Manual for Safety and Comfort for detailed precautions and handling instructions. Charge the battery pack only in an ambient temperature from 5 through 35 degrees Celsius. Otherwise, the electrolyte solution might leak, battery pack performance might deteriorate, and the battery life might be shortened.
Charging the battery
When the power in the battery pack becomes low, the DC IN/Battery indicator flashes amber to indicate that only a few minutes of battery power remain. If you continue to use the computer while the DC IN/Battery indicator flashes, the computer enters Hibernation Mode so that you do not lose any data, and automatically turns itself off. You must recharge the battery pack when it becomes discharged.
Procedures
To recharge a battery pack, connect the AC adaptor to one of the ThunderboltTM 3/USB Type-CTM ports and plug the other end into a working outlet. The DC IN/Battery indicator glows amber while the battery is being charged.

User’s Manual

4-10

Charging Time

The following table shows the approximate time required to charge an exhausted battery fully.

Battery type

Power off

Power on

Battery pack (48 Wh)

about 3 hours about 3 ~ 10 hours

Be aware that the charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you are using the computer. If you make heavy use of external devices for example, the battery might scarcely charge at all during operation. Note that charging time will vary depending on the ambient temperature, the computer’s internal temperature, and how the computer is being used. For example, whether the display is set to shut off automatically when idle, whether you make heavy use of external devices powered by the computer, or if the computer’s internal storage drive is being accessed frequently by an application. The battery might not be charged depending on how the computer is being used, and the charge of battery decreases and battery might not be fully charged sometimes. If AC adaptor is connected via USB Type-CTM adapter, battery charging time might become longer.

Charging notice
The battery might not begin charging immediately under the following conditions:
The battery is extremely hot or cold (if the battery is extremely hot, it might not charge at all). To ensure the battery charges to its full capacity, charge it at room temperature of between 5°C to 35°C (41°F to 95°F). The battery is nearly completely discharged. In this instance, leave the AC adaptor connected for a few minutes and the battery should begin charging.
The DC IN/Battery indicator might show a rapid decrease in battery operating time when you try to charge a battery under the following conditions:
The battery has not been used for a long time. The battery has completely discharged and been left in the computer for a long time.
In such cases, do the following:

User’s Manual

4-11

1. Fully discharge the battery by leaving it in the computer with the power on until the system automatically turns itself off.
2. Connect the AC adaptor to one of the ThunderboltTM 3/USB Type-CTM ports on the computer and to a wall outlet that is supplying power.
3. Charge the battery until the DC IN/Battery indicator glows white. Repeat these steps two or three times until the battery recovers normal capacity.
Monitoring battery capacity
Remaining battery power can be monitored using the following methods:
Clicking the battery icon on the Windows Taskbar Via the Battery Status in the Windows Mobility Center window Wait several seconds to monitor the remaining operating time because the computer needs time to check the remaining capacity of the battery pack and then calculate the remaining operating time, based on this together with the current power consumption. Be aware that the actual remaining operating time might differ slightly from the calculated time. With repeated discharges and recharges, the battery capacity will gradually decrease. In view of this, it is noted that an often used, older battery will not operate for as long as a new battery even when both are fully charged.

Maximizing battery operating time
The usefulness of a battery depends on how long it can supply power on a single charge, while how long the charge lasts in a battery depends on:
Processor speed Screen brightness Internal storage drive power off period How often and for how long you use the internal storage drive and external disk drives, for example, optical disc How much charge the battery contained to begin with How you use optional devices, such as a USB device, to which the battery supplies power Where you store your programs and data Whether you close the display panel when you are not using the keyboard – closing the display saves power. The environmental temperature – operating time decreases at low temperatures. System Sleep Mode System Hibernation Mode Display power off period

User’s Manual

4-12

Whether you enable Sleep Mode, which can conserve battery power if you are frequently turning the computer off and on.

Battery pack exhausted time

When you turn off the power of your computer with the battery pack fully charged, the battery pack will exhaust within the following approximate period:

Battery type Battery pack (48 Wh)

Sleep Mode
about 6 ~ 8 days

Shut Down Mode about 45 days

Be aware that the battery pack exhausted time is affected if there are any external devices connected.

Extending battery life
To maximize the life of your battery pack, do the following at least once a month:
1. Turn off the computer’s power. 2. Disconnect the AC adaptor and turn on the computer’s power. If it
does not turn on, then go to Step 4. 3. Operate the computer on battery power for five minutes. If you find
that the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. However, if the DC IN/Battery indicator flashes or there is some other warning to indicate a low battery condition, go to Step 4. 4. Connect the AC adaptor to one of the ThunderboltTM 3/USB Type-CTM ports on the computer and to a wall outlet that is supplying power. The DC IN/Battery indicator glows amber to indicate that the battery pack is being charged. However, if DC IN/Battery indicator does not glow, this indicates that power is not being supplied. Check the connections for the AC adaptor and the power cord. 5. Charge the battery pack until the DC IN/Battery indicator glows white.
Memory media
The computer is equipped with a memory media slot that can accommodate some kinds of memory media with various memory capacities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants.
Keep foreign objects out of the memory media slot. Never allow metal objects, such as screws, staples and paper clips, to enter the computer or

User’s Manual

4-13

keyboard. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury.
This memory media slot supports the following memory media: microSD/SDHC/SDXC card. Not all memory media have been tested and verified to work correctly. Therefore, it is not possible to guarantee that all memory media can operate properly.
Figure 4-5 Example of memory media (microSD card)

Points to note about the memory media card
microSD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music. For this reason, you cannot copy or play back protected material on another computer or other device, and you cannot reproduce any copyrighted material except for your personal enjoyment. The supported maximum capacity of memory card is 512 GB.
Memory media format
New media cards are formatted according to specific standards. If you wish to reformat a media card, be sure to do so with a device that uses media cards.
Formatting a memory media card
Memory media cards are sold already formatted in conformity to specific standards. If you reformat a memory card, be sure to reformat it with a device such as digital camera or digital audio player that uses the memory cards, not with the format command provided within Windows. To format all areas of the memory card, including the protected area, you must obtain an appropriate application that applies the copy protection system.

Media care
Observe the following precautions when handling the card: Do not twist or bend cards. Do not expose cards to liquids or store in humid areas or lay media close to containers of liquid.

User’s Manual

4-14

Do not touch the metal part of a card or expose it to liquids or let it get dirty. After using the card, return it to its case. The card is designed so that it can be inserted only one way. Do not try to force the card into the slot. Memory cards have a limited lifespan, so it is important to back up important data. Do not write to a card if the battery power is low. Low power might affect writing accuracy. Do not remove a card while read/write is in progress. For more details on using memory cards, see manuals accompanying the cards.
Inserting memory media
The following instructions apply to all types of supported media devices. To insert memory media, do the following:
1. Turn the memory media so that the contacts (metal areas) face down. 2. Insert the memory media into the memory media slot on your
computer. 3. Press the memory media gently until it clicks into place.
Figure 4-6 Inserting memory media

2 1

1. Memory media slot

2. Memory media

Product appearance depends on the model you purchased.
Make sure that the memory media is oriented properly before you insert it. If you insert the media in wrong direction, you might not be able to remove it. When inserting the memory media, do not touch the metal contacts. You might expose the storage area to static electricity, which can destroy data.

User’s Manual

4-15

Do not turn off the computer or switch to Sleep Mode or Hibernation Mode while files are being copied. Failure to do so might cause data loss.
Removing memory media
The following instructions apply to all types of supported media devices. To remove memory media, do the following: 1. Click the Safely Remove Hardware and Eject Media icon on the
Windows taskbar. 2. Select the memory media that you want to remove. 3. Push the memory media until you hear a click to partially release it. 4. Grasp the media and remove it.
If you remove the memory media or turn off the power while the computer is accessing the memory media, you might lose data or damage the media. Do not remove the memory media while the computer is in Sleep or Hibernation Mode. The computer might become unstable or data in the memory media might be lost.
Smart Card
A Smart Card is a credit card sized plastic card. An extremely thin integrated circuit (IC chip) is embedded into the card on which information can be recorded. These cards can be used for a wide variety of applications including telephone related and electronic monetary payments. This section contains information on the proper use of the Smart Card slot, and it is strongly recommended that you read it before operating the computer. Your computer supports ISO 7816-3 asynchronous cards (support protocols are T=0 and T=1) with a working voltage of 5 V.
Some models are equipped with a Smart Card slot on the right side of the computer. The Windows hot-install feature allows you to insert a Smart Card while the computer is turned on. To insert a Smart Card, do the following: 1. Insert the Smart Card into the Smart Card slot with the metal
connectors facing up. 2. Press the Smart Card gently to ensure a firm connection is made.
When inserting a Smart Card into the Smart Card slot, make sure to confirm that the card is oriented correctly before inserting.

User’s Manual

4-16

Insert the Smart Card until it reaches the end of the Smart Card slot. The Smart Card is partially extended beyond the chassis edge. Do not attempt to insert it further. Always remove the Smart Card from the Smart Card slot before moving the computer. Before removing the Smart Card, confirm that the Smart Card is not working with any program or system. Remove the Smart Card after use. Be careful not to bend the Smart Card while removing it from the computer. Failure to follow these instructions might result in damage to the computer and/or damage to the Smart Card.
3. After inserting the Smart Card, you should refer to its documentation and also check the configuration in Windows to ensure that it is correct.
Wireless WAN device
Some models are equipped with the Wireless WAN device. This device enables a high-speed connection to the internet, corporate intranet, and your email while you are away from the office.
Installing a SIM card
To install a SIM card, do the following:
1. Click Start -> (Power), and then select Shut down and ensure that the Power indicator is off.
2. Remove the AC adaptor and all cables and peripherals connected to the computer.
3. Locate the SIM card slot. 4. To pop the SIM card tray partially open, insert a slender object (about
10 mm, diameter 0.8 mm), such as a straightened paper clip, into the eject hole. Gently pull to open the SIM card tray. 5. Place the SIM card into the SIM card tray with the metal connectors facing down.

User’s Manual

4-17

6. Insert the SIM card tray into the SIM card slot, and push the center of the tray to close it. Press gently until it locks into place. Figure 4-7 Installing the SIM card

4

1

2 3

Nano SIM

1. SIM card slot

3. SIM card tray

2. Slender object (diameter 0.8 mm) 4. SIM card

Product appearance depends on the model you purchased.
Never allow metal objects, such as screws, staples and paper clips, to enter the computer. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Do not touch the connectors on the SIM card or on the computer. Debris on the connectors might cause access problems.

If you can see Internet and attach at APN type when creating APN information, please make sure to select Internet and attach as the APN type.

Removing a SIM card
To remove the SIM card, do the following: 1. Shut down the computer. Make sure the Power indicator is off. 2. To pop the SIM card tray partially open, insert a slender object (about
10 mm, diameter 0.8 mm), such as a straightened paper clip, into the eject hole. Gently pull to open the SIM card tray. 3. Remove the SIM card from the SIM card tray. 4. Insert the SIM card tray back into the SIM card slot.
GPS Function
If your computer includes Wireless WAN device, it may include GPS (Global Positioning System).

User’s Manual

4-18

The performance of GPS varies depending on the environment. Failure to pinpoint a location might happen.
Your current location might not be shown depending on the status of GPS or the location. If you are obtaining your current location information from the computer, your current location might not be detected due to the information accuracy. Specifically, your current location might not be detected in the following places or situations:
Inside or directly under a building Inside a bag or box Among dense trees When there is an obstacle (person or object) in front of the antenna Underground tunnel, underground, or underwater Buildings, streets or residential areas Near to high voltage cables Bad weather, such as heavy rain or snow
HDMITM out port
HDMITM (High-Definition Multimedia InterfaceTM) out port digitally transfers both video and audio data without reducing the quality. HDMITM-compatible external display devices including televisions can be connected via the HDMITM out port. As the port operation of all external monitors have not been confirmed, some display devices might not function properly.
To connect an HDMITM-compatible display device, do the following: To connect a device to the HDMITM out port, you must purchase a suitable HDMITM cable.
1. Plug one end of the HDMITM cable into the HDMITM in port of the HDMITM display device.
2. Turn the HDMITM display device’s power on. 3. Plug the other end of the HDMITM cable into the HDMITM out port on
your computer.

User’s Manual

4-19

Figure 4-8 Connecting the HDMITM out port

2 1

1. HDMITM out port

2. HDMITM cable

Product appearance depends on the model you purchased.
Do not plug/unplug an HDMITM device under the following conditions: The system is starting up. The system is shutting down.
When you unplug the HDMITM cable and replug it, wait at least 5 seconds before you replug the HDMITM cable again.

Settings for display video on HDMITM
To view video on the HDMITM display device, be sure to configure the settings, otherwise you might find that nothing is displayed.
Be sure to select the display device or audio device before starting to play video. Do not change the display device or audio device while playing video. Do not change the display device under the following conditions:
While data is being read or written While communication is being carried out

USB Type-CTM Adapters
Your computer capabilities can be enhanced by connecting external devices such as RGB monitor to the ThunderboltTM 3/USB Type-CTM port via USB Type-CTM adapters. You can also charge your computer by connecting the AC adaptor via the USB Type-CTM adapter.
Depending on the model you purchased, one of the following USB TypeCTM adapters might be provided.
Always use the USB Type-CTM adapter that is included with your computer or Dynabook accessories.

User’s Manual

4-20

Disconnect any devices and cables from the USB Type-CTM adapter when connecting/disconnecting the AC adaptor or the USB Type-CTM adapter. When connecting the USB Type-CTM adapter, Thunderbolt function is not supported. If AC adaptor is connected via USB Type-CTM adapter, battery charging time might become longer. Do not connect other USB Type-CTM adapter to USB Type-CTM port of USB Type-CTM adapter.
USB-CTM to Ethernet LAN Adapter This adapter provides: USB Type-CTM port (Power Delivery Charging) and LAN jack.
Figure 4-9 USB-CTM to Ethernet LAN Adapter
2

1. LAN jack

1
2. USB Type-CTM port (Power Delivery Charging)

The USB Type-CTM port (Power Delivery Charging) on this adapter is used for connecting AC adaptor only. USB data transmission is not supported by this port.

User’s Manual

4-21

USB-CTM to VGA Adapter This adapter provides: USB Type-CTM port (Power Delivery Charging) and RGB monitor port.
Figure 4-10 USB-CTM to VGA Adapter
2

1

1. RGB monitor port

2. USB Type-CTM port (Power Delivery Charging)

The output resolution of RGB monitor port on this adapter is up to 1920 x 1200 @60Hz. The USB Type-CTM port (Power Delivery Charging) on this adapter is used for connecting AC adaptor only. USB data transmission is not supported by this port.

USB-CTM to HDMITM/VGA Travel Adapter
This adapter provides: USB Type-CTM port (Power Delivery Charging), USB 3.0 port, HDMITM out port, RGB monitor port, and LAN jack.
Figure 4-11 USB-CTM to HDMITM/VGA Travel Adapter

1
2 5
3
4

1. LAN jack 2. USB 3.0 port
3. HDMITM out port

4. RGB monitor port 5. USB Type-CTM port (Power Delivery Charging)

The output resolution of HDMITM out port on this adapter is up to 3840 x 2160 @30Hz, and output resolution of RGB monitor port on this adapter is up to 1920 x 1200 @60Hz. Do not use the HDMITM out port and RGB monitor port simultaneously. The USB Type-CTM port (Power Delivery Charging) on this adapter is used for connecting an AC adaptor only. USB data transmission is not supported by this port.

User’s Manual

4-22

USB-CTM to VGA/LAN Adapter This adapter provides: USB Type-CTM port (Power Delivery Charging), RGB monitor port, and LAN jack.
Figure 4-12 USB-CTM to VGA/LAN Adapter
3

1

2

1. RGB monitor port 2. LAN jack

3. USB Type-CTM port (Power Delivery Charging)

The output resolution of RGB monitor port on this adapter is up to 1920 x 1200 @60Hz. The USB Type-CTM port (Power Delivery Charging) on this adapter is used for connecting an AC adaptor only. USB data transmission is not supported by this port.

USB Type-CTM port
The USB Type-CTM adapter provides you with a USB Type-CTM port which enables you to connect the AC adaptor when you want to charge the battery or operate from AC power.
1. Connect the power cord to the AC adaptor. 2. Connect the DC output plug of the AC adaptor to the USB Type-CTM
port on the USB Type-CTM adapter. 3. Plug the power cord into a live wall outlet.

User’s Manual

4-23

4. Connect the USB Type-CTM adapter to one of the ThunderboltTM 3/ USB Type- CTM ports on your computer.
Figure 4-13 Connecting the AC adaptor via USB Type-CTM adapter

4 3

2 1

USB Type-CTM adapter appearance varies depending on the model you purchased.
RGB monitor port
An external analog monitor can be connected to the RGB monitor port on the USB Type-CTM adapter. To connect an external analog monitor, do the following:
1. Connect the USB Type-CTM adapter to one of the ThunderboltTM 3/ USB Type- CTM ports on your computer.
2. Plug one end of the RGB cable into the RGB port of the external RGB monitor.
3. Turn the external monitor’s power on. 4. Plug the other end of the RGB cable to the RGB monitor port on the
USB Type-CTM adapter. There are no fastening screws for an external monitor cable on the RGB monitor port. However, external monitor cables which have connectors with fastening screws can still be used.

User’s Manual

4-24

Figure 4-14 Connecting the RGB cable to the RGB monitor port
1 2
3 4

1. ThunderboltTM 3/USB Type-CTM port 3. RGB monitor port

2. USB Type-CTM adapter

4. RGB cable

USB Type-CTM adapter appearance varies depending on the model you purchased.
When displaying desktop on an external RGB monitor, desktop is sometimes displayed on the center of the monitor with black bars around desktop (with small size).
In this case, read the manual of the monitor and set the suitable supporting display mode at the monitor. Then it will be displayed in suitable size with correct aspect ratio.

LAN jack
The LAN jack on the USB Type-CTM adapter supports Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) or Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).
This section describes how to connect/disconnect to a LAN.
The link speed

References

• Activate Power Management on Your Computer | ENERGY STAR
• The FreeType Project
• Welcome to the Health Canada Web site | Bienvenue au site Web de Santé Canada
• Intel vPro® Platform Is Built for Business
• /index.html
• Home | Dynabook
• Dynabook Europe
• Shut down, sleep, or hibernate your PC - Microsoft Support
• Use Magnifier to make things on the screen easier to see - Microsoft Support
• Complete guide to Narrator - Microsoft Support
• Get started with eye control in Windows - Microsoft Support
• Homepage | ENERGY STAR
• ENERGY STAR Certified Computers | EPA ENERGY STAR
• Accessibility Technology & Tools | Microsoft Accessibility

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>