Mibro Earbuds 4 User Manual

Mibro Earbuds 4

Product Information

This product is a handheld cordless vacuum cleaner designed for quick and easy cleaning. It comes with a rechargeable battery that provides up to 30 minutes of continuous use. The vacuum cleaner has a dustbin capacity of 0.5 liters and a powerful motor that can handle both dry and wet debris. The vacuum cleaner also includes multiple attachments such as a crevice tool, dusting brush, and upholstery tool to help clean different surfaces and hard-to-reach areas.

Product Usage Instructions

1. Charge the vacuum cleaner for at least 4 hours before first use.
2. Press the power button to turn on the vacuum cleaner.
3. Select the appropriate attachment for the surface you want to clean.
4. Hold the vacuum cleaner and move it back and forth over the surface to be cleaned.
5. Empty the dustbin when it is full or after each use.
6. When finished, turn off the vacuum cleaner and store it in a dry place.

Note: Do not use the vacuum cleaner to pick up large debris or liquids. Always empty the dustbin before storing the vacuum cleaner.

Thank you for choosing our product, hope the fashionable appearance and high quality stereo can enrich your life.
Note: Please fully charge ft with the charging case before the first use when you receive the product.

Product Overview

1. Eartips
2. Charging Pin
3. Tone hole
4. Charging Box Battery Indicator
5. Type-c Charge input
6. Touch Multi-function Button{MFB)
7. Microphone

Charging

Pleue put the buds into the box before the first use, and connect the charglnc cable with the charging box to fully charp.

• Put the buds into the corresponding slot to ensure that the charging contact of the buds contacts the metal sheet.
• The white light is always on when the buds charging.
• When the charging case charging case white light flashes quickly to indicate low power, please charge.
• When the battery voltage is lower than 3.1V, the charging compartment light goes off.

When the charging box is low power, the light goes off, please charge.

• When the red light of the charging case flashes, it means that the earbuds are charging;
• When the charging case charging compartment, the red light of the charging compartment is solid to indicate that the battery is fully charged.
• Connect USB adapter to charge it (charging current shall not exceed 1A).
• If it is not used for a long time, it shall be charged at least once every three months.

Getting started

1. Open the cover of the charging box and take out the double buds for wearing. The buds will automatically turn on. When prompt tone is heard, the buds will enter the Bluetooth pairing mode.
2. Open your mobile phone system Bluetooth, search for the Bluetooth name “Mibro Earbuds 4” and click the device name to pair. The buds will prompt tone if the pairing is successful.
3. The buds will record the last connection status of the device. Take out two buds and wear them properly, you will hear prompt tone indicating that both buds are connected and the device music can be played normally.

Functions

Incoming call status

Music status

Getting Off

The earbuds turn off automatically if:

1. You put earbuds back to the charging case.
2. When earbuds leave the charging case, but haven’t connect to any devices within 5 minutes.
3. When the earphone battery is low (please charge it in time).

Safety Instructions

• Avoid dripping and dropping.
• Please use a certified charging adapter with an output voltage not exceeding 5v.
• Never disassemble or modify your earbuds for any reasons to avoid any damages and dangers.
• Keep the earbuds dry and do not submerge it in water.
• Keep out of reach of children, small parts included may be a choking hazard,and avoid using the LED indicator close to the eyes of children or animals.
• Do not use this earbuds during a thunderstorm to avoid irregular function and increased risk of the electric shock.
• Clean with a dry, soft lint-free cloth, do not use harsh chemicals or strong detergents to clean.
• The product shall not be exposed to excessive hot or wet.

Hearing Safety

• To avoid hearing damage, do not listen for long time at high volume.
• Do not turn the volume so high that you’re unable to hear your surroundings.
• Do not use earbuds while driving.
• You should use with caution or temporarily discontinue using in potentially hazardous situations.

Name and content of hazardous substances

This table is prepared in accordance with SJ/T 11364-2014.

• Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB/T 26572.
• It means that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in GB/T 26572.

This product meets the ROHS environmental protection requirements: there is no mature technology in the world to replace or reduce the lead content of some electronic components of circuit components, steel and copper alloys.

Trouble shooting

Trouble shooting and after sales regulations

Earbuds

1. The earbuds is silent during use.
2. During the call, the other party cannot hear the sound.
3. Unable to charge, the charging indicator is not on.

Non warranty regulations

1. Wear and dirt caused by users’ use, such as scratches and color changes; As well as damage caused by contact with chemical reagents, sharp objects, falling, extrusion and deformation.
2. Unauthorized maintenance, collision, misuse, negligence, abuse, water ingress, accidents, and failures caused by the use of non-standard accessories of the product.
3. Tearing, altering labels, forging anti-counterfeiting marks, etc.
4. Damage caused by force majeure.
5. Non compliance with performance faults listed in the performance fault table.

If you need after-sales service, please contact Mibro customer service:

• Website: www.mibrofit.com
• customer service: 400-0908-508

Attention:
The illustrations of products and accessories in the manual are schematic diagrams for users’ reference only. Due to the update and upgrading of this product, the actual product may be different from the schematic diagram. Please take the actual product as the standard. Mibro brand owns the final right to interpret the goods.

FAQ

Q: One of the earbud is silent while another is playing.
A:

1. It may be that the buds can’t be connected normally, which may occur in extreme cases. Please put the buds back into the charging box, and then take it out for reconnection after 5 seconds;
2. The silent buds may be out of power. Please put your buds back into the charging box to fully charge them and then take them out for reuse.

Q: The earbuds didn’t turn on when I get them from the charging case, it can’ t turn on automatically.
A: Please check the power of charging case, if there is no power the earbuds can’t turn on automatically, Please fully charge the product before use.

Q: The earbuds is placed in the charging compartment and still connected to the mobile p hone.
A: Please check whether the earbuds is in good contact with the charging chamber, or the charging chamber is not powered.

Q: I have established connection with my smartphone, but I am not hearing any sounds?
A: Please make sure that you have turned up the volume of both devices Smartphone requires you to set up the Bluetooth earbuds as an audio output devices before transimition of sound. Please check the instruction of your smartphone for details. If you are using a music player or other Bluetooth devices, please make sure it supports A2DP protocol.

Q: Why the connection is not stable and cuts out intermittently?
A: Please make sure there are no obstacles between the udbuds and your Bluetooth device; please make sure there is no radio or WiFi interference
nearby.

Q: The sound is not very clear or the caller cannot hear my voice clearly.
A: Please adjust the volume on your phone and earbuds. Make sure there is no source of interference nearby. Stay close to your smartphone check if there’s any improvement.

Package Contents

• Charging Box X1
• Earbuds X2
• Charging cable X1
• User Manual X1

Basic Parameters

Earbuds Basic Parameters:

• BT Model: XPEJ009
• BT Version: V5.3
• BT Range: <10m/33ft
• Battery Capacity: 25mAh (Per Earbuds)
• Charging Time: About 1.5 hours
• Play Time: About 4 hours
• Stand By: About 30 hours
• Input: 5V =– 25mA
• Battery Type: Lithium ion polymer
• Weight: About 3g (Per Earbuds)
• Waterproof: IPX3

Charge Box Basic Parameters

• Battery Capacity: 220mAh
• Input: 5V ==-200mA
• Output: 5V=100 mA
• Charging Time: About 2 hours
• Battery Type: Lithium ion polymer
• Weight: About 28.9g

Manufacturer by: mibro
Manufacturer baton Technology (shanghai) co, id.
Manufacturer address: Room 4015, Building 2, No. 588, Zixing Road, Minhang District, Shanghai

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>