veho MZ-S Bluetooth Wireless Speaker User Manual

: June 9, 2024
: veho

Table of Contents

veho MZ-S Bluetooth Wireless Speaker
Product Information Bluetooth Wireless Speaker
Product Usage Instructions
Controls
Pairing
Important Note
Specifications
Other veho products
Support
EC DECLARATION OF CONFORMITY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

veho MZ-S Bluetooth Wireless Speaker

Product Information Bluetooth Wireless Speaker

Speaker model : MZ-S
Speaker type : Wireless
Speaker power : 5W
Speaker size : 52mm

Product Usage Instructions

Charging:
We recommend fully charging the speaker before using it for the first time. Ensure to use the supplied USB cable and power input of no more than 5V1A. When charging, the LED indicator light will show solid red, turning off when fully charged.

veho-MZ-S-Bluetooth-Wireless-Speaker-fig-1

Controls

veho-MZ-S-Bluetooth-Wireless-Speaker-fig-2

Power button/LED indicator
Mode
Volume (-)/Previous
Volume (+)/Next
Play/Pause
Micro SD card slot
Micro USB port
Microphone

Pairing

To pair the speaker with your device, press and hold the power button for 2 seconds until the LED indicator flashes blue. The speaker will now be discoverable on your device. Pairing with a device Power on the speaker by pressing and holding the power button for 2 seconds, the speaker will automatically enter pairing mode. Next, on your device, select ‘Veho MZ-S’ from the Bluetooth® menu.

veho-MZ-S-Bluetooth-Wireless-Speaker-fig-3

Functions:

Power : Press and hold the power button for 2 seconds to turn on. Press and hold the power button for 2 seconds again to turn off.
Volume down/Previous track: Press the (-) button to skip to the previous track. Press and hold the (-) button to reduce the volume.
Play/Pause : Press the (>II) button once to play and once again to pause.
Volume up/Next track : Press the (+) button to skip to the next track. Press and hold the (+) button to increase the volume.
Answering/Ending calls : Press the (>II) button once to answer an incoming call. Press once again to end the call.
Rejecting calls : Press and hold the (>II) button for 2 seconds to reject an incoming call.
Voice Assistant : Press the power button once to activate the voice assistance on your mobile device.
Power Press and hold the power button for 2 seconds to turn on. Press and hold the power button for 2 seconds again to turn off.
Mode Press the mode button once to change modes between Bluetooth®/microSD Card.
Volume down/Previous track Press the (-) button to skip to the previous track. Press and hold the (-) button to reduce the volume.
Play/Pause Press the (>II) button once to play and once again to pause.
Volume up/Next track Press the (+) button to skip to the next track. Press and hold the (+) button to increase the volume.
Pairing two speakers together (TWS) Ensure the MZ-S speakers are disconnected from your device in Bluetooth® settings. Power on both speakers, double press the power button on one unit, this will activate TWS; when connected, you will hear a tone. Once the speakers have paired successfully to each other select
‘Veho MZ-S’ from the Bluetooth® menu on your device.
Answering/Ending calls Press the (>II) button once to answer an incoming call. Press once again to end the call.
Rejecting calls Press and hold the (>II) button for 2 seconds to reject an incoming call.
Voice Assistant Press the power button once to activate the voice assistance on your mobile device.

Important Note

To prolong the life of your MZ-S speaker, the battery should be discharged and recharged every few months. Leaving the battery for long periods without use could reduce battery efficiency until it no longer holds a charge. Always charge the speaker with the supplied cable and a compatible power source, failure to do so could invalidate the warranty.

IMPORTANT! How to get the most out of your speaker To prolong the life of your MZ-S speaker the battery should be discharged and recharged every few months. Leaving the battery for long periods without use could reduce battery efficiency until it no longer holds a charge. Always charge the speaker with the supplied cable and a compatible power source, failure to do so could invalidate the warranty.

Specifications

Speaker size

Speaker size 52mm
Speaker output 5W
Bluetooth® version V5.0
Input voltage 5V⎓1A
Battery 1200mAh/3.7V
Playback time Up to 12 hours
Charge time Approximately 4.5 hours
Wireless range Up to 10m/32ft (without obstacles)
Supports Bluetooth®/Micro SD (up to 32GB)
Charge type Micro USB
Dimensions φ75mm x 105mm

Other veho products

veho-MZ-S-Bluetooth-Wireless-Speaker-fig-4

Support

In the event, you need to contact Veho for support or troubleshooting for your Veho MZ-S Wireless Speaker, please contact us via our chat box on our website at: veho-world.com

EC DECLARATION OF CONFORMITY

Hereby, Veho UK LTD declares that the radio equipment type (VSS-701-MZS-B / VSS-702-MZS-R / VSS-703-MZS-W / VSS-704-MZS-O) is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at https://veho-world.com/compliance/ Frequency band(s) – 2402-2480 MHz Maximum radio-frequency power – + 8dBm Veho Global Group, PO Box 436, Southampton, SO30 9DH, UK Veho Europe, 25 Place de la Madeleine, 75008 Paris

DISPOSAL
This symbol, affixed to the product or its packaging, indicates that the product must not be processed as household waste. This product should be correctly disposed of according to your local guidelines for electrical and battery operated products. Correct disposal of the battery will avoid potential harm to the environment and human health. For further information regarding the recycling of this product, please contact your local waste recycling centre.