Korg EFGSC Volca Digital Sample Sequencer Owner’s Manual

EFGSC Volca Digital Sample Sequencer
Owner’s Manual

Precautions

Location
Using the unit in the following locations can result in a malfunction.

• In direct sunlight
• Locations of extreme temperature or humidity
• Excessively dusty or dirty locations
• Locations of excessive vibration
• Close to magnetic fields

Power supply
Please connect the designated AC adapter to an AC outlet of the correct voltage. Do not connect it to an AC outlet of voltage other than that for which your unit is intended.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios and televisions.
Handling
To avoid breakage, do not apply excessive force to the switches or controls.
Care
If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not use liquid cleaners such as benzene or thinner, or cleaning compounds or flammable polishes.
Keep this manual
After reading this manual, please keep it for later reference.
Keeping foreign matter out of your equipment
Never set any container with liquid in it near this equipment. If liquid gets into the equipment, it could cause a breakdown, fire, or electrical shock.
Be careful not to let metal objects get into the equipment. If something does slip into the equipment, unplug the AC adapter from the wall outlet. Then contact your nearest Korg dealer or the store where the equipment was purchased.

THE FCC REGULATION WARNING (for USA)
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

If items such as cables are included with this equipment, you must use those included items.
Unauthorized changes or modification to this system can void the user’s authority to operate this equipment.
Notice regarding disposal (EU only)
If this symbol is shown on the product, manual, battery, or package, you must dispose of it in the correct manner to avoid harm to human health or damage to the environment. Contact your local administrative body for details on the correct disposal method. If the battery contains heavy metals in excess of the regulated amount, a chemical symbol is displayed below the symbol on the battery or battery package.

IMPORTANT NOTICE TO CONSUMERS
This product has been manufactured according to strict specifications and voltage requirements that are applicable in the country in which it is intended that this product should be used. If you have purchased this product via the internet, through mail order, and/or via a telephone sale, you must verify that this product is intended to be used in the country in which you reside.
WARNING: Use of this product in any country other than that for which it is intended could be dangerous and could invalidate the manufacturer’s or distributor’s warranty. Please also retain your receipt as proof of purchase otherwise your product may be disqualified from the manufacturer’s or distributor’s warranty. Company names, product names, and names of formats etc. are the trademarks or registered trademarks of their respective owners.

• All product names and company names are the trademarks or registered trademarks of their respective owners.
• Specifications and appearance are subject to change without notice for improvement.

Installing batteries

Slide off the battery cover from the rear panel and insert the batteries, making sure to observe the correct polarity (+/- orientation) and then reattach the battery cover.
Turn off the volca sample before replacing the batteries.
Depleted batteries should be immediately removed from the volca sample. Leaving depleted batteries in the battery compartment may cause malfunctions (the batteries may leak). In addition, remove the batteries if you do not expect to use the volca sample for an extended period of time.
Do not mix partially used batteries with new ones, and do not mix batteries of differing types.

About the MIDI implementation chart
An external MIDI device can be connected to the MIDI IN jack of the volca sample to control the audio source of the volca sample. The MIDI messages that can be received by the volca sample are listed in its MIDI implementation chart. You can download the MIDI implementation chart for the volca sample from the Korg Web site.

©2014 KORG INC.
EFGSC 1

Documents / Resources

| Korg EFGSC Volca Digital Sample Sequencer [pdf] Owner's Manual
EFGSC1, EFGSC Volca Digital Sample Sequencer, Volca Digital Sample Sequencer, Digital Sample Sequencer, Sample Sequencer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>