StarTech Com ST121HD20FXA2 4K 60Hz HDMI over Fiber Extender User Guide

StarTech Com ST121HD20FXA2 4K 60Hz HDMI over Fiber Extender

Product Information

The HDMI over Fiber Extender – 4K 60Hz (Product ID: ST121HD20FXA2) is a device that allows you to extend HDMI signals up to 984 feet (300 meters) using a single or multi-mode fiber optic cable. It supports resolutions up to 4K at 60Hz, making it ideal for use in professional and commercial settings.For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/ST121HD20FXA2

Package Contents

• Transmitter
• Receiver
• Universal Power Adapter
• Local HDMI Extender Unit x 1
• Remote HDMI Receiver Unit x 1
• IR Receiver x 2
• IR Blaster x 2
• Power Adapter x 2
• Quick-Start Guide x 1

Requirements

• HDMI Source Device
• HDMI Display Device
• HDMI Cable (not included)
• Single or Multi Mode Fiber Optic Cable (not included)
• AC Electrical Outlet
• HDMI Source Device x 1
• HDMI Display Device x 1
• HDMI M/M Cables (sold separately) x 2
• Single Mode LC Fiber Optic Cable up to 3300 Feet (sold separately) x 1
• Multi Mode LC Fiber Optic Cable up to 1000 Feet (sold separately) x 1

Installation

Note: Ensure the HDMI Display Device and the HDMI Source Device are powered off before you begin the installation.

1. Position the Transmitter near the HDMI Source Device, and the Receiver near the HDMI Display.

2. Set the EDID Selector switches to the desired EDID function for the setup.

3. Connect an HDMI Cable (not included) from the HDMI Input Port on the Transmitter to the HDMI Source Device.

4. (Optional) Connect an HDMI Cable from the HDMI Output Port on the Transmitter to the Local HDMI Display.

5. (Optional) Connect an Audio Source Device to the Line In port on the Transmitter.

6. Connect a Single or Multi Mode Fiber Optic Cable to the Optical Output Port on the Transmitter and to the Optical Input Port on the Receiver.
   Note: The cabling cannot go through any networking equipment (e.g. router, switch, etc.).

7. Connect an HDMI Cable to the HDMI Output Port on the Receiver and to the HDMI Display Device.

8. (Optional) Connect an Audio Device to the Audio Output port on the Receiver.

9. Connect the Universal Power Adapter to the DC 5V Port on the Transmitter to an AC Electrical Outlet.

10. Connect the Universal Power Adapter to the DC 5V Port on the Receiver to an AC Electrical Outlet.

Transmitter and Receiver

1. Position the Transmitter near the HDMI Source Device, and the Receiver near the HDMI Display.

2. Set the EDID Selector switches to the desired EDID function for the setup.

3. Connect an HDMI Cable (not included) from the HDMI Input Port on the Transmitter to the HDMI Source Device.

4. (Optional) Connect an HDMI Cable from the HDMI Output Port on the Transmitter to the Local HDMI Display.

5. (Optional) Connect an Audio Source Device to the Line In port on the Transmitter.

6. Connect a Single or Multi Mode Fiber Optic Cable to the Optical Output Port on the Transmitter and to the Optical Input Port on the Receiver.
   Note: The cabling cannot go through any networking equipment (e.g. router, switch, etc.).

7. Connect an HDMI Cable to the HDMI Output Port on the Receiverand to the HDMI Display Device.

8. (Optional) Connect an Audio Device to the Audio Output port on the Receiver.

9. Connect the Universal Power Adapter to the DC 5V Port on theTransmitter to an AC Electrical Outlet.

10. Connect the Universal Power Adapter to the DC 5V Port on the Receiver to an AC Electrical Outlet.

Regulatory Compliance

The HDMI over Fiber Extender – 4K 60Hz is compliant with FCC Part 15 and Industry Canada Statement regulations.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Contact Information

• StarTech.com Ltd.
• 45 Artisans Cres London, Ontario N5V 5E9 Canada
• StarTech.com LLP
• 4490 South Hamilton Road Groveport, Ohio 43125 U.S.A.
• StarTech.com Ltd.
• Unit B, Pinnacle 15 Gowerton Rd, Brackmills Northampton NN4 7BW United Kingdom
• StarTech.com Ltd.
• Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands

For more information, visit:

• FR: startech.com/fr
• DE: s tartech.com/de
• ES: startech.com/es
• NL: startech.com/nl
• IT: s tartech.com/it
• JP: startech.com/jp

HDMI over Fiber Extender – 4K 60Hz

Product ID
ST121HD20FXA2
Transmitter

Receiver

when the

Universal Power Adapter is connected

2

| Optical Signal LED Indicator| •     Transmitter and Receiver: Solid Green when the Transmitter and Receiver establish an optical link
---|---|---

3

|

HDMI Signal LED Indicator

| •     Transmitter: Solid Green when an HDMI Source Device is connected to the HDMI Input Port

•     Receiver: Solid Green when an HDMI Display Device is connected to the HDMI Output Port

4| IR Input Port| •     Transmitter and Receiver: Connect an IR Receiver
5| IR Output Port| •     Transmitter and Receiver: Connect an IR Blaster
6| Audio Input Selector| •     Change between HDMI Audio Pass-through, or Line In

7

|

EDID Selector

| •     Set the EDID mode for the HDMI Extender

•     11: Copy Receiver’s HDMI Output EDID

•     10: Copy Transmitter’s HDMI Output EDID

•     01: Force 4K 60Hz EDID

•     00: Force 1080P EDID

8| Service Port| •     Transmitter and Receiver: For manufacturer use only
9| DC 5V Input| •     Transmitter and Receiver: Connect the

Universal Power Adapter

10

|

Optical Connection Port

| •     Connect the Transmitter and Receiver with a

Single Mode or Multi Mode Fiber Optic Cable

•     The LC Simplex SFP Module is pre-installed

•     Third Party SFP Module’s cannot be used

11| HDMI Output Port| •     Connect an HDMI Display Device
12| HDMI Input Port| •     Connect an HDMI Source Device
13| Line In Port| •     Connect a 3.5mm Audio Device

14

|

Serial Terminal Block

| •     Transmitter and Receiver: Connect a RS232 Serial Device to the Terminal Block for bi- directional communication
15| Audio Output| •     Connect to an Audio Output Device

Warranty Information

This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

StarTech.com Ltd. is not liable for any damages resulting from the use or inability to use this product, including but not limited to loss of data or damage to hardware. Please refer to the product warranty for further information.

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Regulatory Compliance

FCC – Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement

1. This Class B digital apparatus complies with Canadian ICES-003.
   CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference,
2. This device must accept any interference, including interference that may cause undesired operation of the device.

• StarTech.com Ltd. 45 Artisans Cres London, Ontario N5V 5E9 Canada
• StarTech.com LLP 4490 South Hamilton Road Groveport, Ohio 43125 U.S.A.
• StarTech.com Ltd. Unit B, Pinnacle 15 Gowerton Rd, Brackmills Northampton NN4 7BW United Kingdom
• StarTech.com Ltd. Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

References

• 4K 60Hz HDMI over Fiber Extender Kit - HDMI® Extenders | StarTech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>