TELEFUNKEN TF29 MAL 3093 Tube Large Diaphragm Microphone Instruction Manual
- June 4, 2024
- TELEFUNKEN
Table of Contents
TELEFUNKEN TF29 MAL 3093 Tube Large Diaphragm Microphone
INSTALLATION
Safety directions
Please read this information carefully before installing or using this product. Please keep this user manual for further reference.
-
The lamps may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
-
The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
-
Maintenance of the lights is limited to the surfaces. For electrical safety reasons, this product must not be cleaned with water or other liquids. Use only a dry, lint-free cloth for cleaning.
-
Caution! Risk of electric shock. Before connecting to the mains, always check the entire light for possible damage. Never use the light if you notice any damage.
-
Caution! Disconnect the mains cable from the power supply before assembling or disassembling. Switch off the earth leakage circuit breaker/automatic circuit breaker or unscrew the fuse. Turn the switches to “OFF”.
-
Caution! Before drilling the mounting holes, make sure that no gas, water or electricity pipes and wires can be drilled through or damaged in your chosen mounting location.
-
When mounting, ensure that the attachment material is suitable for the subsurface and that this surface is capable of carrying the weight of the fixture. The manufacturer is not liable for improper installation of the item on the relevant subsurface.
-
The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed of with ordinary household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic devices. Please ask your local municipality for the point of acceptance.
-
Safety class II S. This light is specially insulated and must not be connected to an earthed conductor.
-
Safety class II. Take note that when switching on that the building site supply lines available have double or reinforced insulation up to the terminal connection area. The enclosed terminal box ensures that when the building site conductors with basic insulation have a maximum length of “80 mm“.
-
Description of the supply terminals: L = Phase N = Neutral conductor G = Earthed conductor.
-
Protective covers and end covers for mains voltage control parts must always be mounted.
-
Do not install the light on a damp or conductive subsurface.
-
Please make sure that no cables get damaged during the installation work.
-
The lights have a protection class rating of “IP23“ and are solely intended for indoor use only of private households. The protection class “IP23” only applies to the visual area of the lamp when installed. The protection class “IP20” applies to the concealed area of the lamp when installed. IP degree of protection applies for ceiling suspension only.
-
Do not look directly into the light source (illuminant, LED, etc.).
-
The included or insertable LED light bulb contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
-
( The operating device (transformer, ballast, control unit, etc.) may only be replaced by the manufacturer or trained personnel.
-
This product contains a light source of energy efficiency class “F“, based on the EU regulation 2019/2015. Reference setting: “4000K“.
-
LED color deviation when using different chargers may occur. The light color and luminous strength of the LED’s can also change as a result of life span level from the lamp.
-
This article is not suitable for use with dimmable electric circuits.
-
It can be controlled using a smartphone with WiFi /Wlan connection.
The relevant app: “Tuya smart“ is available for this purpose. This can be downloaded for Apple products in the App Store and for Android products in the Play Store. As a first-time user, you must register and create a new account. If you already have an account, log in with your access data. The article must be in learning mode (as a rule the delivery standard) in order to register the article in the “Tuya smart“App. The article can also be manually set for learning mode in order to register the article in the “Tuya smart“App. This is achieved by “3x“switching the power supply off and then on again (cord switch, wall switch etc.). The learning mode is indicated by the continual blinking of the article. After registration of the article in the “Tuya smart“App the article is then controllable and ready for operation using compatible speech- controlled systems“(Amazon Alexa / Google Home)“. The skill required for “(Amazon Alexa / Google Home)“with the “Tuya smart“designation then needs to be activated in the App. -
It can be controlled using the optionally available remote control “309800TF“.
-
Never cover these lamps with heat-insulating enclosures or similar materials.
-
This LED product may only be operated with the enclosed power supply unit or control gear.
-
The following accessories are not included in delivery: remote control – item “309800TF”
-
“HVMM Licht“ hereby declares that the radio equipment type “3093_3094_3101-0xTF“ complies with the directive “2014/53/EU“.
-
This product works with an operating frequency of “2,4 GHz” and transmission power of “max. 6 dBm”.
-
memory function: The lamp is switched on using an external light switch after a minimum off period of approx. “5” seconds with the last selected function or switch position.
DECLARATION OF CONFORMITY
Applied harmonized standards:
- EN55015:2013+A1:2015
- EN61547:2009
- EN301 489-1 V2.2.0:2017
- EN301 489-3 VZ.1.1:2017
- EN300 328 V2.1.1:2017
- EN60598M1 :201 S+A 1 :2018
- EN60598-2-4:1997
- EN62031 :2008+A2:2015
- EN61347-2-13:2014+A1 :2017
- EN62493:2015
- EN62471:2008
The object of the declaration described above is in conformity with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Applied harmonized standard: EN50581:2012
Signed for and on behalf of: HVMM Licht GmbH & Co. KG Im Kissen 2, 59929
Brilon
Brilon, den