amazon basics HLC-3595L-1 Gaming Chair Instruction Manual

amazon basics HLC-3595L-1 Gaming Chair Instruction Manual

ASSEMBLY GUIDE

Congratulations, you are now the owner of the new chair!
Before enjoying the comfortable chair, you have to assemble it. This assembly guide will take you through the basic assembly process. To make sure your assembly progress goes smoothly, please follow the assembly instructions especially the important safety information.
It is possible to assemble the chair by your own, while having a second person to help you will make it easier.
Please check if there are any missing parts in the package before start. If there are any issues, please don’t hesitate to drop us an email and we’ll help you ASAP.
If you run into any difficulty during the assembly, remember to check out the assembly Video to see if you’ve missed something. If you’re still unable to resolve your problems , drop us an email and our support team will assist you.

https://qygjuser.s3.us-east-2.amazonaws.com /HL/HLC-3595L-1.mp4

WARNING

To ensure proper assembly, please follow all steps and use all parts. Failure to follow this warning can result in serious injury to yourself or others.

Package List

Without further ado, we kindly suggest you to list all parts needed for the chair first.

Assembly Instruction

Step 1:

Turn the Base (7) upside down, then insert Legs (6) one by one to Base.
Use the Wrench (13) to screw Ten Bolts (11) into the pre-drilled screw holes to fix Base and Legs

Step 2:

Insert the Casters (8) into the holes at the end of each Leg.
Insert the Gas Lift (5) to the center
hole of the Base

Step 3 :

Align the Mechanism (4) over the pre-drilled holes underneath the Seat (2) , make sure the front of the mechanism is facing thefront of the Seat.
Attach the Mechanism to the Seat using Four Bolts (9) , tighten all the bolts with the Wrench (13).

Step 4 :

Turn the Seat (2) upright and align the center hole of the Seat Plate overthe lift, then push the Seat down onto the lift firmly until the connection is secure.
Attach the Armrest (3) to the Seat
(2) with Two Bolts (10) , using the Wrench (13) to tighten.
The Bolt only needs to be screwed in 50%. The installation of the other side Armrest is the same.

Step 5 :

Set the Back (1) stand up.
Attach the Back (1) to the Arms by inserting one Bolt (10) in the holes with the Wrench (13). The Bolt only.
(1)needs to be screwed in 50%.

Step 6 :

Rotate the back of the chair up, then secure it with the Bolt (10) use the Wrench (13). Adjust the balance on each side of the chair, and 100% tighten all the bolts at this step.

Step 7 :

Press Caps (12) into screw holes of each side.

CAUTION:

Make sure all bolts and screws are fully tightened before using chair. Lubricate all moving parts and tighte all bolts/screws every 6 month or whenever needed.

Instructions For Use

Seat Height: Paddle-shaped lever on the right side

To raise:While taking your weight off chair, lift lever up.
To lower:While seated, lift lever up

• At the proper height, your feet should rest flat on the floor.

Tilt Tension: Long stem under the seat with knob

To increase tension: + While seated, turn knob forward(Counter clockwise).
To decrease tension:While seated, turn knob backward (Clockwise ).
Set the tilt tension to control the resistance you feel when leaning back.

3. Operating the tilt lockout

To let your chair tilt back, pull the control handle out.
To stop your chair from tilting, sit forward, then push the control handle in.

Armrests adjustment

The armrest can be adjusted.
Make it up and down if you need

Safety And Maintenance

Do not stand on the chair, Do Not use the chair as a stepladder. Use this product for seating one person at a time.
Do not use the chair unless all bolts and screws are firmly secured. Avoid contact with sharp objects to prevent puncturing the fabric. Every 6 months, check all bolts and screws to ensure they are tight. To clean, spot clean only using a damp towel and mild cleaner, first test on a small, unseen area of fabric.
Chair weight limit not to exceed 250 lbs.

Safety Information

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>