ITC 69389 Surface Mount Docking Backup Light Installation Guide
- June 15, 2024
- ITC
Table of Contents
ITC 69389 Surface Mount Docking Backup Light
Specifications
- Part Number: 69389
- Power Source: 12V DC
- Color: Black and Red
- Installation Location: Any suitable surface
Parts Needed
- Docking/Backup Light
- Mounting Screws
- Power Drill
- Safety Instructions
- Wire Nuts (not provided)
Installation Instructions
-
Remove the bezel if it is not already disassembled.
-
Determine the installation location for your light.
- Select a suitable surface to mount the light.
-
Once the location is determined, drill a 0.5″ hole.
-
Connect the wires to a power source.
-
Use wire nuts to securely connect the wires.
-
Black (-) wire should be connected to the negative
terminal. -
Red (+) wire should be connected to the positive terminal.
-
-
Feed the wires back through the hole.
-
Screw the light in place using the provided screws.
-
Reattach the bezel.
Contact Information
3030 Corporate Grove Dr. Hudsonville, MI 49426
Phone: 616.396.1355
Website: itc-us.com
FAQ
Q: Can this light be used underwater?
A: No, this light is not designed for underwater use. It is recommended to keep it dry and away from water.
Q: Can the light be connected to a different power source?
A: The light is designed to be connected to a 12V DC power source. Connecting it to a different power source may cause damage and void the warranty.
Q: What is the lifespan of this light?
A: The lifespan of the light depends on various factors such as usage, operating conditions, and maintenance. Generally, it can last for several thousand hours of continuous use.
Part#: 69389
PARTS NEEDED
Safety Instructions
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- Operating Voltage: 10 – 14V DC
- Remove bezel if not already disassembled
- Determine the installation location for your light. Once determined drill a 0.5” hole
- Connect wires to power source
- Feed wires back through the hole and screw the light in place using the screws provided
- Reattach bezel
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit www.itc-us.com/warranty-return-
policy
Rev A • 10/09/23