Promal 459-094513 Tagflex Rubber Enhanced Aqueous Roof Paint Instructions
- June 10, 2024
- promal
Table of Contents
TDS og instruction
Promal Tagflex
Rubber enhanced aqueous roof paint
Item no. 459-094513 PR no. 4413727
UFI: S200-U0CW-500M-QF3S
Instructions
459-094513 Tagflex Rubber Enhanced Aqueous Roof Paint
Rubber enhanced acrylic high build paint.
Almost 100% flexible and paintable with Promal roof paint.
Areas of application
Degraded fibre cement, concrete and tile roofs and the likes, where
maintenance and protection is desired.
Substrate
Substrate must be clean, dry, firm, free from staining and suitable for
painting.
Remove algae, grime and dirt with suitable cleaning agent, using low-pressure
washer or special roof cleaning pressure washer.
Sand glossy areas.
Be aware that the cleaning of asbestos roofs require special equipment and in
Denmark, special permit.
Treatment
Stir extremely well before and during use.
Apply with paint sprayer (airless nozzle 521, 523, 525).
Consumption must be 3-5 m²/l, applied in one single layer.
Treat strongly absorbent substrates with diluted Tagflex, before treatment
with undiluted Tagflex.
Promal Tagflex is not suitable as a topcoat and must be painted with Promal
Roof Paint.
Care and maintenance
Inspection at least once a year.
Remove foreign objects and fouling.
The roof surface should be cleaned with a cleaning agent, e.g.
universal cleaner, every two years.
If damage occur, have the painted area checked by a contractor, and if
necessary repaired.
Correctly prepared painted and maintained, the treatment with Promal Tagmaling
has an expected durability of ≥ 10 years.
The mentioned information is based on laboratory experiments and practical
testing at 20°C and 85% RH. If the temperature or humidity of the material,
the substrate or the surroundings deviate from this, the product properties,
drying and curing times are affected. A general responsibility for paint
treatment cannot be given, due to the many caveats that may arise regarding
the substrate, application method, etc. Where the consumption of a paint
extend over more batches, these should be intermixed to avoid sheen and shade
differences. It is the user’s responsibility to always obtain new and revised
product sheets. We reserve the right to make changes without notice. We
reserve the right for printing errors. In case of inconsistency between
language versions, the Danish version applies.
Type: Acrylic/oil emulsion, roof paint
Areas of application: Roofs
Binder: Rubber enhanced acrylic
Thinning: Dilute with water
Density: Approx. 1.05-1,1 kg/l ISO 2811
Solids: Approx. 38% w/w
Viscosity (at 20°C): cP 2300
Gloss (at 60° angle): N/A
Consumption: 3-5 m²/l depending on substrate and surroundings
Drying time at 23°C/50% RH: Touchdry 4 hours Next coat 6 hours
Next coat (at 20°C – 85% RH): When dry, but min. 6 hours
Curing time (at 20°C – 85% RH): Fully cured after 7 days
*Drying and curing times are always dependent on coat thickness, temperature, humidity and substrate
Application temperature: Developed for use at 10°C-25°C
Min. +10°C – Max. 30°C (substrate and surroundings)
Humidity: Best at 60%-65% RH
Min. 40% max. 80% RH
Cleaning tools: Water and soap
Storage: Store at +5°C-+25°C, not in direct sunlight, and inaccessible to
children
Shelf life: Min. 24 months from date of production when stored correctly
(Batchnr: yymmdd)
Packaging: 20 litres
Colour: Black
VOC-value: <38 g/l
EU VOC limit (2010): Cat. A/c: 40 g/l
CLP symbols: None
CLP signal word None
MAL-kode: 00-1
Washable: N/A – must be painted
Permeability: Class 1 jf. EN 7783-2
Adhesion: GT≤1 jf. EN 2409
Document date: 20-11-2022
Promal A/S • Joachim Wellers Vej 27 • DK-7500 Holstebro
+45 9610 5080 • [email protected] •
www.promal.dk