ZEEMR M1 Pro Projector Instructions

M1 Pro Projector
Instructions Manual

Safety Instructions

• Please read the Manual carefully prior to use and keep itproperlyfor further reference;

• Do not block the Product’ s air inlet/pullet during projection, to avoid damaging it due to high temperature;

• Avoid high-altitude falling or mounting of the Product to avoid damages; do not stare at the machine’ s lens to avoid eye injury;

• For any problem, do not dismantle the Product without permission; instead, contact the professional after-sales personnel for assistance.

Warning Do not dismantle, collide, or squeeze the Product, nor put it on fire.
For any major swelling, stop using it immediately. Keep the Product away from high tern operate re.

Announcement

With a focus on constant improvement, the Company devotes itself to improving product performance and offering products with high quality and competitive quality. All pictures and functions described in the Marital are subject to the real product and preset contents. The Company reserves the right to improve product functions and HMI described in the Manual without prior notice. The final product prevails.
Please keep your machine properly. The Company does not bear liabilities for the losses due to misoperation of software/hardware or maintenance, as well as the losses due to leakage of personal information to a third party. The Company does not bear liabilities for the accidental .osses while using the Manual, nor undertake the claims of compensation proposed by the third party for using the Product
The Product’s function introduction has been reviewed and proofreads carefully by specialists. In case of any omission, your understanding and correction are highly appreciated. For more information about product introduction and value- added service, please feel free to visit our official website WVVW.ZEM R.COM.

List of Components

Note: Some components may vary along with the configuration of model and system

Product Introduction

Remote Controller

Basic Parameters

Infrared
receive port| LCD| Light Source| LED
---|---|---|---
Product
Type| Projector| Dimensions| 12693158
mm
Keystone
Correction| Four-direction
correction| Zoom Mode| Manual zoom
Weight| 1.6KG| Throw Ratio| 1.48:1
Loudspeaker-| 3W| Input| 100-240V-
50/60Hz
Output| 12VDC 4A| Resolution| 720P

Indicator Status

Power on/off

Power on

Method 1: Press the power button above the Product for 1-3s to power it on.
Method 2: Make sure the remote controller has enough power supply, keep it facing the Product, and press the power button to power on the Product.

Power off

Method 1: Press the power button above the Product for 1-3s to power off the Product.
Method 2: Make sure the remote controller has enough power supply, keep it facing the Product, and press the power button to power off the Product.

Troubleshooting

and rear
air inlet, then reboot the system

Table of Projection Size and Distance

Projection Dimensions
(without keystone
correction, “)| Screen Length
Width (m)| Lens – Screen (m)
---|---|---
30| 0.670.37| 0.99
40| 0.880.50| 1.30
50| 1.120.63| 1.66
60| 1.320.74| 1.95
70| 1.570.88| 2.32
80| 1.770.99| 2.62
90| 2.011.13| 2.97
100| 2.24*1.26| 3.32

Definition Adjustment

Operate the zoom thumbwheel/rod to adjust the definition. (Note The recommended projection distance is L5m – 3m)

Download Application

Enter the APPS channel 1, enter the application store of this APP by classification 2 to download the applications as required, or enter the application store  directly through App Store 3 to download the applications as required

Function Setting

Network setting

Enter setting option 1 and click network setting 2

Open WF]setting option 3, connect the wifi 4 as required f the target WIfi is not displayed, ad wifi 5 to search and add it

Bluetooth Setting

Enter setting option 1 and click Bluetooth setting 2

Open Bluetooth setting switch 3, select the target Bluetooth device for pairing 4 if the target Bluetooth is not displayed, do scanning 5 and then connect it.  {Note: Bluetooth connection supports loudspeaker only, while mobile phone connection is not supported)

Projection Setting

Enter the setting option and click projection setting 1

Projection mode: [Desktop front projection, desktop rear projection, hoisted front projection, and hoisted rear projection; the user can select them by pressing the left/right/up/down button2on the remote controller Keystone correction {Auto, 4-point, manual; the user can select them by pressing the left/right button of remote controller. Auto option(3 The Product will enter auto calibration without manual operation of the user

4-point option Press the OK button on the remote controller to enter the 4-point ­eystone correction image 4 and operate by the prompts

Manual option The $image will show the options such as horizontal keystone correction, vertical keystone correction, and stepless 20om
Horizontal keystone correction and vertical keystone correction The user can press left/right button of remote controller to adjust the image Stepless zoom: Press OK button on remote controller to enter a 4-point keystone correction image and operate by the prompts

Language Setting

Enter the setting option and click language setting 1. The user can select the language and input method 2

System Update

Enter system option and click system update setting 1

Online upgrade: Realize online upgrade through the network.
USB upgrade (local upgrade) Copy the upgrade firmware into the root directory of the U disc formatted FAT32, connect the U disc to the U58 interface and choose USB upgrade Recover default settings:
Recover the user configuration and operation configuration to the default status

Phone Projection/Same Screen

Connect the Product and mobile phone under the same WIFI

Android Same Screen Projection (Miracast)

Enter my application, click the OK button of the remote controller to enter Miracast software 1 and operated by the prompts. 2

iPhone Same Screen (IOScast)

Enter my application, click the OK button of the remote controller to enter Airplay software1, and operated by the prompts 2

Description of Hazardous Substances

Part
Name| Hazardous Substances
---|---
Lead (Pb)| Mercury
(Hg)| Cadmium
(Cd)| Hexavalent
Chromium
(Cr (VI))| Polybrominated-
ed Biphenyl
(PBB)| Polybrominated-
ed Diphenyl
Ethers (PBDE)
Shell| O| O| O| O| O| O
Circuit
board
and
compo-
nets| X| O| O| O| O| O
Power
adapter| X| O| O| O| O| O
Battery| X| O| O| O| O| O

The sheet was prepared as per SJ/T11364
O The content of this hazardous substance in this part is conforming to the limit 0f GB/T26572
x The content of certain homogeneous material in this part exceeds the limit 0f GB/T26572

This mark means the Product enjoys a 10-year period of environmental use.
If used normally, the Product will not have leakage of mutation of trace hazardous substanc­ es or elements, not bring major pollution on environment, or have major damage to user and property

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to pad 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with the FCC Radiation exposure limit set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>