ZEEMR Z1 Master Android Projector User Manual
- May 15, 2024
- ZEEMR
Table of Contents
- Dear customer,
- Safety Instructions
- Announcement
- List of Components
- Product Introduction
- Remote control description
- Basic Parameters
- Indicator Status
- Power on/off
- Troubleshooting
- Function Setting
- Settings_ projection settings
- Warranty Conditions
- EU Declaration of Conformity
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZEEMR Z1 Master Android Projector
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.
www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz
Safety Instructions
Please read the Manual carefully prior to use and keep it properly for further
reference;
Do not block the Product’ s air inlet/outlet during projection, to avoid
damaging it due to high temperature;)
Avoid high-altitude falling or mounting of the Product to avoid damages; do
not stare at the machine’ s lens to avoid eye injury;
For any problem, do not dismantle the Product without permission; instead,
contact the professional after-sales personnel for assistance.
Warning;
- Do not dismantle, collide, squeeze the Product, nor put it in fire.
- For any major swelling, stop using it immediately.
- Keep the Product away from high temperature,
Announcement
With a focus on constant improvement, the Company devotes itself in improving product performance and offering products with high quality and competitive quality. All pictures and functions described in the Manual are subject to the real product and preset contents. The Company reserves the right to improve product functions and HMI described in the Manual without a prior notice. The final product prevails.
Please keep your machine properly. The Company does not bear liabilities for the losses due to misoperation of software/hardware or maintenance, as well as the losses due to leakage of personal information to a third party.
The Company does not bear liabilities for the accidental losses while using the Manual, nor undertake the claims of compensation proposed by the third party for using the Product.
The Product’ s function introduction has been reviewed and proofread carefully by specialists. In case of any omission, your understanding and correction are highly appreciated.
For more information about product introduction and value-added service, please feel free to visit our official website: WWW.GLOBAL.ZEEMR.COM.
List of Components
-
Host
-
Remote controller
-
Manual
-
Power Cord
-
Power adapter
Product Introduction
Remote control description
Basic Parameters
Display Mode | LCD |
---|---|
Product Type | Projector |
Keystone correction | Automatic |
Weight | 2.5LG |
Loudspeaker | 5W*2 |
Output | 19V6.32A |
Light Source | LED |
Dimensions | 198219186mm |
Zoom Mode | Automatic focus adjustment |
Throw Ratio | 1.25:1 |
Input | 100-240V~50/60Hz |
Resolution | 1080P |
Indicator Status
Working Status | White lamp |
---|---|
Powered on | Normally on |
Powered off | Normally off |
Power on/off
Power on
Method 1: Press the power button above the Product for 1-3s to power on.
Method 2: Make sure the remote controller has enough power supply, keep
it facing the Product and press the power button to power on the Product.
Power off
Method 1: Press the power button above the Product for 1-3s to power off
the Product.
Method 2: Make sure the remote controller has enough power supply, keep
it facing the Product and press the power button to power off the Product.
Troubleshooting
Fault | Troubleshooting |
---|---|
No display | Power off the Product and reboot system |
Display error | Power off the Product and reboot system |
High temperature prompt or auto power-on | Do not block the front air outlet |
and rear air inlet, then reboot the system
Operate the zoom thumbwheel/rod to adjust the definition. (Note: The recommended projection distance is 1.5m – 3m).
Function Setting
Projection
Select “Project”, click [OK] to enter the projection details page 1, ensure
that the projector network and the mobile phone/computer/ other devices are in
the same network 2, then select the corresponding ios/Android projection mode
3, and then operate according to the prompt 4.
Multimedia video
Select “Video”, click [OK] to enter the media details page 1, select the
target video 2, and then click [OK] to enter the video player.
Multimedia music
Select “Music”, click [OK] to enter the media details page 1, select the
target music 2, and then click [OK] to enter the music player
Bluetooth music
Select “Bluetooth music 1, click [OK], the screen automatically turns off, and
a pairing Bluetooth Music voice appears. The music is is transferred to and
played on the projector after the Bluetooth pairing of the mobile phone and
projector.
Signal source
Connect the projector with other devices through Hdmi cables, and then select
“Signal source” 1 on the projector, click [OK], the system detects the signal,
and the images of the computer/other devices will be automatically transferred
to the projector.
Settings
Click “Set card” 1 or press the “Set”of [Remote control] to pop out the
settings interface and then it can set the network, Bluetooth, projection
physical settings, signal source, sound, system update, system information,
etc., of the projector.
Settings_ Network
Select 1 to set the projector network, including “Wireless network and
Ethernet”. In case of “Wireless network”, click “OK” after the projector finds
the network target 2, input WiFi password, click “Yes” to automatically pair
the network. In case of “Ethernet”, directly insert the internet cable with
the normal signal into the [Internet interface] of the projector.
Settings_Bluetooth
Select 1 to set the projector Bluetooth, then the projector will automatically
scan the “Bluetooth target” 2 in the available range, and then select target
pairing.
Settings_ projection settings
Select 1 to set the projection parameters of the projector including the projection method, image zooming and aspect ratio. The automation function including the following is available:
- Auto focus press “Auto focus” of the projector or remote control to make the projector automatically focus clearly;
- Automatic trapezoidal correction: the screen will be automatically corrected it is side projected;
- Four corner correction: manually adjust the “Coordinates” of the four corners of the screen to manually correct the screen;
- Automatic curtain alignment: the screen will be automatically aligned with the canvas when the projector screen completely covers the curtain;
Setting_ signal source
Select 1 to switch the signal source or sound control mode of the projector.
Settings_sound setting
Select 1 to set the sound output device of the projector and turn on or off
the “Key sound”
Settings_system settings
Select 1 to update the system and look up the software and hardware
information of the projector.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
Identification data of the manufacturer’s / importer’s authorized
representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: PROJECTOR
Model / Type: ZEEMR Z1
This equipment is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU and Directive 2011/65/EU amended
(EU) 2015/863.
Prague, 24.08.2023
WEEE
This product must not be disposed of as normal household waste in accordance
with the EU Directive on Waste Electrical and Electronic Equipment (WEEE –
2012/19 / EU). Instead, it shall be returned to the place of purchase or
handed over to a public collection point for the recyclable waste. By ensuring
this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. Contact
your local authority or the nearest collection point for further details.
Improper disposal of this type of waste may result in fines in accordance with
national regulations.
References
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza | Alza.co.uk
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz
- alza.de
- alza.hu
- alza.sk
- ZEEMR - Best Choice for Your Home Projector
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>