mibro O1 True Wireless Earphone User Manual

mibro O1 True Wireless Earphone

Product Information

This product is a portable Bluetooth speaker that can be used to play music from any Bluetooth-enabled device. It has a built-in rechargeable battery, and can also be connected to devices via an auxiliary cable. The speaker has a maximum output power of 10 watts and can play music for up to 8 hours on a single charge.

Product Usage Instructions

1. Charge the speaker using the provided USB cable before first use. The charging time is approximately 3 hours.

2. To connect a Bluetooth-enabled device, turn on the speaker and put it into pairing mode by pressing and holding the Bluetooth button until the LED light flashes. On your device, turn on Bluetooth and select the speaker from the list of available
   devices.

3. If you prefer to use an auxiliary cable, plug one end into the speaker’s AUX port and the other end into your device’s headphone jack.

4. To adjust the volume, use the controls on your device or the buttons on the speaker. Press the “+” button to increase the volume and the “-” button to decrease it.

5. To turn off the speaker, press and hold the power button until the LED light turns off.

Thank you for choosing our product, hope the fashionable appearance and high- quality stereo can enrich your life.

Note:
Please fully charge It with the charging case before the first use when you receive the product.

Product Overview

1. Soundhole
2. Tone hole
3. Multi-function Button(MFB)
4. Charging Pin
5. LED Indicator
6. Microphone
7. Charging Box Battery Indicator
8. Type-C Charge input

Charging

Please put the buds into the box before the first u.se1 and connect the charging cable with the charging box to fully charge.

• put the buds into the corresponding slot to ensure that the charging contact of the buds contacts the metal sheet.
• The blue light is always on when the buds charging.
• When the buds indicator is off, the battery is fully charged.
• Charging when the indicator light flashes.
• When all four indicators are on, the battery is fully charged.
• Connect the USB adapter to charge it (charging current shall not exceed IA).
• If it is not used for a long time, it shall be charged at least once every three months.

Getting Starts

1. Open the cover of the charging box and take out the buds for wearing. The buds will automatically turn on. When the prompt tone is heard, the buds will enter Bluetooth pairing mode.
2. Open your mobile phone system Bluetooth, search for the Bluetooth name “Mibro Earphone 01 ” and click the device name to pair. The buds will prompt tone if the pairing is successful.
3. The buds will record the last connection status of the device. Take out two buds and wear them properly, you will hear a prompt tone indicating that both buds are connected and the device music can be played normally.

Wearing style

1. Distinguish between left and right ears
2. Follow the ears Rotate backward
3. Adjust the headphones to a Comfortable state
4. Correct wearing style

Key presses

Incoming call status

• Single press:
  Answer/end calls

• Press and hold for two seconds:
  Reject an incoming call

Music status

• Single Press:
  Play/Pause

• Press three times in a row:
  Left ear Previous song/Right ear Next song

• Double Press:
  Left ear volume decreases Right ear volume plus

• Press and hold for two seconds:
  Voice assistant

Getting Off

The earbuds turn off automatically if:

1. You put the earbuds back into the charging case.
2. When earbuds leave the charging case but haven’t connected to any devices within 5 minutes.
3. When the earphone battery is low (please charge it in time).

Safety Instructions

• Avoid dripping and dropping.
• Please use a certified charging adapter with an output voltage not exceeding 5v.
• Never disassemble or modify your earbuds for any reason to avoid any damage and dangers.
• Keep the earbuds dry and do not submerge them in water.
• Keep out of reach of children, small parts included may be a choking hazard, and avoid using the LED indicator close to the eyes of children or animals.
• Do not use this earbud during a thunderstorm to avoid irregular function and increased risk of electric shock.
• Clean with a dry, soft lint-free cloth, do not use harsh chemicals or strong detergents to clean.
• The product shall not be exposed to excessively hot or wet.

Hearing Safety

• To avoid hearing damage, do not listen for a long time at Mgh volume.
• Do not turn the volume so high that you’re unable to hear your surroundings.
• Do not use earbuds while driving.
• You should use it with caution or temporarily discontinue using it in potentially hazardous situations.

Name and content of hazardous substances

This table is prepared in accordance with SJ/T 11364-2014.

• Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB(T 26572.
• It means that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in GB(T 26572.

This product meets the ROHS environmental protection requirements:
there is no mature technology in the world to replace or reduce the lead content of some electronic components of circuit components, steel, and copper alloys.

Troubleshooting and after-sales regulations

Earbuds

1. The earbuds are silent during use.
2. During the call, the other party cannot hear the sound.
3. Unable to charge, the charging indicator is not on.

Non warranty regulations

1. Wear and dirt caused by users’ use, such as scratches and color changes; As well as damage caused by contact with chemical reagents, sharp objects, falling, extrusion, and deformation.
2. Unauthorized maintenance, collision, misuse, negligence, abuse, water ingress, accidents, and failures caused by the use of non-.standard accessories of the product.
3. Tearing, altering labels, forging anti-counterfeiting marks, etc.
4. Damage caused by force majeure.
5. Noncompliance with performance faults is listed in the performance fault table.

If you need after-sales service, please contact Mi Bro customer service:
Website: www.mibrofit.com
customer service: 400-0908-508

Attention:
The illustrations of products and accessories in the manual are schematic diagrams for users’ reference only. Due to the update and upgrading of this product, the actual product may De different from the schematic diagram. Please take the actual product as the standard.

Mibro brand owns the final right to interpret the goods.

FAQs

Q: One of the earbuds is silent while another is playing.

A:

1. It may be th<‘lt the buds can1 t be connected normally, which may occur in extreme cases. Please put the buds back into the charging box, and then take it out for reconnection after 5 seconds;
2. The silent buds may be out of power. Please put your buds back into the charging box to fully charge them and then take them out for reuse.

Q: The earbuds didn’t turn on when I get them from the charging case, it can’t turn on automatically.
A: Please check the power of charging case, if there is no power the earbuds can’ t turn on automatically, Please fully charge the product before use.

Q: The earbuds are placed in the charging compartment and are still connected to the mobile phone.
A: Please check whether the earbuds are in good contact with the charging chamber, or if the charging chamber is not powered.

Q: I have established a connection with my smartphone, but I am not hearing any sounds.
A: Please make sure that you have turned up the volume of both devices Smartphone requires you to set up the Bluetooth earbuds as an audio output device before transmission of sound. Please check the instruction on your smartphone for details. If you are using a music player or other Bluetooth devices, please make sure it supports the A2DP protocol.

Q: Why the connection is not stable and cuts out intermittently?
A: Please make sure there are no obstacles between the redbuds and your Bluetooth device; please make sure there is no radio or WiFi interference nearby.

Q: The sound is not very clear or the caller cannot hear my voice clearly.
A: Please adjust the volume on your phone and earbuds. Make sure there is no source of interference nearby. Stay close to your smartphone and check if there’s any improvement.

Package Contents

• Charging Box X1
• EartJuds X2
• Charging cable X1
• User Manual Xl

Basic Parameters

Earbuds Basic Parameters:

• BT Model XPEJ008
• BT Version V5.3
• BT Range <10m/33ft
• Battery capacity 100mAh (per Earbuds)
• Charging Time About 1.5 hours
• Ptaynme About 7 hours
• Stand By About 250 hours
• Input 5V=80mA
• Battery Type Lithium-ion polymer
• Weight About10.9g (Per Ea, buds)
• Waterproof IPX6

Charge Box Basic Parameters:

• Battery capacity 800mAh
• Input SV=500mA
• Output SV= l00mA
• Charging Time About 3.5 hours
• Battery Type Lithium-ion polymer
• Weight About92g

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Manufacturer by:
Zhenshi Information Technology(Shanghai) Co., Ltd.

Manufacturer address:
Room 4015, Building 2. No. 588, zixing Road, Minhang District, Shanghai.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>