HALCYON LED442 LED Batten Light Instruction Manual
- June 10, 2024
- HALCYON
Table of Contents
HALCYON LED442 LED Batten Light
Specification
- Product Name: LED Batten Light
- Model#: LED440 N, LED440 DL, LED441 N, LED441 DL, LED442 N LED442 DL
- Description:
- 20 Watt LED, Non-dimmable, IP20, 4000K I 6000K
- 40 Watt LED, Non-dimmable, IP20, 4000K I 6000K
- 60 Watt LED, Non-dimmable, IP20, 4000K I 6000K
- Rated Voltage: 220-240V~, 50/60HZ
INSTALLATION INSTRUCTIONS
- Switch off the power.
- Remove caps, unscrew the diffuser, and remove.
- Fasten the chassis to the surface.
- Re-connect the driver connection and wire terminal block as indicated.
- Fasten the diffuser to the chassis.
- Replace caps.
- Switch the luminaire on to test the luminaire functions correctly and is electrically safe.
WARNING:
FIRE RISK EXISTS IF THE LAMP IS COVERED BY OR POSITIONED CLOSE TO CURTAINS OR
OTHER COMBUSTIBLE MATERIALS
Installation note:
Do not install on the same circuits as Metal halide, Fluorescent, and other
“Low power factor” devices. When installed on the same circuit it can cause
flickering and/or premature failure of the “high power factor” electronic
drivers. The harmonic distortion from low power factor devices alters the
Waveform of the AC supply which can cause componentry in high power factor
electronic drivers to resonate, run over temperature and fail after prolonged
exposure.”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>