ION RD-RS025BT Glow Stone Pair User Manual

RD-RS025BT Glow Stone Pair

Product Information

This device is designed to comply with Part 15 of the FCC Rules. It is a transmitter that may cause undesired operation due to interference. Any changes or modifications not approved by the responsible party for compliance may void the user’s authority to operate the equipment.

The device and its antenna(s) must not be used or operated in conjunction with any other antenna or transmitter. To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the device and your body.

Product Usage Instructions

Before using the device, ensure that it is placed at a minimum distance of 20cm from your body. This will help maintain compliance with FCC’s RF Exposure guidelines.

Do not use or operate the device and its antenna(s) in conjunction with any other antenna or transmitter as this may cause interference that could lead to undesired operation.

Any changes or modifications to the device not expressly approved by the responsible party for compliance may void the user’s authority to operate the equipment. Therefore, avoid making any alterations to the device without proper approval.

It is important to note that failure to comply with these guidelines may result in harmful interference, undesired operation, and non-compliance with FCC regulations.

Glow Stone Pair Quick start Guide

Support

Thank you for purchasing the Glow Stone Pair! At ION, your entertainment is as important to us as it is to you. That’s why we design our products with one thing in mind-to make your life more fun and more convenient.
For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit ionaudio.com.
For additional product support, visit ionaudio.com/support.

Box Contents

• Glow Stone USB Power Adapter
• 1/8″ (3.5 mm) Stereo Auxiliary Cable Quick start Guide / Safety & Warranty Manual
• Micro-USB Cables

Note: Before you first use the product, please fully charge the battery. Your unit was purposely shipped with a reduced battery charge to ensure safe transit. For optimal charging, power off the speaker while charging.

Features

1. Bluetooth LED
2. Power/Linking Button
3. Micro-USS Charging Port
4. Aux Input
   Note: Audio from the auxiliary input will not be transmitted to a linked speaker.

Charging

For fastest charging, power off Glow Stone and use the included micro-USB cable to connect the speaker to (A) a USB power adapter (DC 5V, not included) connected to a power outlet, or (B) your computer (powered on).

Note: A solid red LEO will appear to indicate that the speaker is charging. When charging is complete, the red LED will tum off.

Note: If you experience the music cutting out at loud volumes, this is an indication that the battery is low. To avoid experiencing audio cutting out while the product’s battery is at a low state of charge: decrease the volume, and/or charge the battery.

Outdoor Use and Care

Though Glow Stone is water-resistant and able to tolerate splashing water, please review the tips below to get the best performance from Glow Stone:

• Bring Glow Stone indoors during extreme cold, heavy rain, or melting snow.
• Please do not place Glow Stone in standing water.
• Please do not connect the charging adapter to Glow Stone in a wet environment.
• Keep any non-water-resistant devices (phones, music players, etc.) in a dry place where they will not be affected by water and cause a risk of electric shock.

Bluetooth Connecting with Glow Stone

Connecting to One Glow Stone

1. Power on Glow Stone by holding down the Power button for 2 seconds. Glow Stone will automatically enter Bluetooth pairing mode indicated by the Bluetooth LED flashing blue.

2. Navigate to your device’s Bluetooth setup screen, find Glow Stone, and connect. When connected, the Bluetooth LED will be lit solid blue and you will hear “Connected”.
   Note: If you experience trouble in connecting, select “Forget this Device” on your Bluetooth device and try to connect again.

3. To disconnect, turn off Bluetooth from your device’s Bluetooth settings.

Linking Two Glow Stone speakers (stereo):

1. Repeat the steps seen in the above section Connecting to One Glow Stone.
2. Power on the second Glow Stone speaker.
3. The Glow Stone speakers should automatically link together. You will hear 2 short rings to confirm the link was successful.

Note: The Bluetooth range will be determined by the distance that your Bluetooth device is to the “primary” speaker.
Note: Glow Stones should be whin 32′ (t Om) of each other to pro[>!!rl link.

Light Modes

Short press and release the Power button to cycle through colors (whe/red/blue/green). Each color has a solid state and an active state. When active, the LED will slowly fade in and out, and if music is playing, the LED will flash to the beat of the music.

Note: Power off the unit after use in order to conserve the battery. Glow Stone will automatically power off after 30 minutes if no audio is playing.

Technical Specifications

• Output Power: 15 W (peak)
• Driver: 5″ (127 mm)
• Frequency Response: 100 Hz – 18 KHz
• Bluetooth:
  • Profile: A2DP, AVRCP
  • Range: Up to 100 ft. (30 m) (Bluetocth range is affected by walls, obstructions, and movement. For optimal performance, place the product in the center of the room so is unobstructed by  walls, furniture, etc.)
  • Linked Range: Up to 32 ft. (10 m)
• Water Resistance Class: IPX4
• Battery: Built-in rechargeable 3.7V, 2000 mAh lithium polymer battery
  • Battety Life: Up to 8-10 hours (Battery le may vary based on temperature, age, and volume use.)
  • Recharge Time: Up to 5 Hours
  • Charging Adapter : 5V, 1A
• Dimensions: (WxDxH): 10.2″ x 11.0″ x 11.0″ (260 x 280 x 280 mm) (per speaker)
• Weight: 4.55 lbs (2.06 kg) (per speaker)

Safety & Warranty Information

For complete warranty information: ionaudio.com/warranty

Important Safety Instructions

1. Read these instructions. Keep these instructions. Heed all warnings. Follow all Instructions.
2. Do not defeat the safety purpose of the polarized or grounding-type plug (If applicable). A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not frt into your outlet, consult an electrician for replacement of the obsolete outlet.
3. Protect the power cord from being walked on or pinched particular1y at plugs, convenience receptacles, and the point where they exit from the apparatus.
4. Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus (If applicable). When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
5. Unplug this apparatus during lightning storms.
6. Power Sources (rf applicable): This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.
7. caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (a battery pack or an installed battery) shall not be exposed to excessive heat such as sunshine, fire, etc. (This applies only if your product uses a battery.)
8. Protective earthing terminal Of applicable): The apparatus should be connected to a mains socket outlet with a protective earthing connection.
9. For Class II apparatus only frf applicable): This symbol means the equipment is a Class II or doubleinsulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
10. Class II Wiring rrr applicable): To reduce the risk of electric shock, the external wiring connected to the terminals with •cIass II Wiring” requires Class II wiring installed by an instructed person or the use of ready-made leads or cords.
11. This apparatus is for professional use only. Intended operational climate: moderate.
12. Of applicable) When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful not to damage the power cord. Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer.
13. Warning frf applicable): Excessive sound pressure (high volumes) from headphones can cause hearing loss.
14. Warning Of applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the&. bottom enclosure or rear panel before installing or operating the product.
15. Warning (if applicable): Terminals marked with the lightning bolt symbol may be of sufficient magnitude to constitute a risk of electric shock.

Safety Notices

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT ,I

DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un- insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

INSTRUCTIONS: The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance.

WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments.

NOTICE CONCERNING FCC REGULATIONS: You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• reorient or relocate the receiving antenna;
• move this unit;
• increase the separation between the equipment and receiver;
• connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
• be sure that all cables are properly shielded, using a choke or ferrite where appropriate;
• consult the dealer or an experienced radio/television technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

RF Exposure Statement

To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna nr transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>