Rebotec 186.00.10 Kids Anterior Walker Rollator Instructions

186.00.10 Kids Anterior Walker Rollator
Instruction Manua

Intended Use / User Advisory

The Rollators are designed for persons with limited walking ability and serve to increase their ability to move. The Rollators may be used only on solid, even surfaces.
The aluminum tubular design provides security against tipping over. Its lightweight not only makes the Rollator easier to drive, but the bow handle also allows it to be pulled up towards the upper body, thus allowing the patient to easily overcome street curbs. In addition, the backrest may be outfitted with a back padding (accessory), which makes sitting comfortably.
For transport, the Rollator can be folded up. The bow handle is also height adjustable to suit the height of the patient.
Have your specialized dealer or care provider advise you on using the Rollator and its adjustment for proper function!

Instructions for Assembly and First-time Use

1. Unfolding the Rollator
   Place the Rollator on its front wheels and push the frame with the rear wheels apart (A) Fig. 1.
   The Rollator clicks by itself into its final position (B) Fig. 2.

2. Adjusting the Handles-Fig. 3
   Next, remove both star-grip screws (C). Then choose the appropriate height (D) and adjust the grip handles to the next screw hole. Reinstall the star- grip screws (C) and tighten them firmly.

3. Using the Brakes –Fig. 4
   By pulling up the left and right brake levers (G), the back wheels are locked respectively. The permanent brake is set by pushing the brake levers (H) downwards. By pulling up the brake levers (G) the permanent brake is disengaged.

4. Folding the Rollator together
   Then with one hand pull the red cord (J) Fig. 2 upwards until the click- lock disengages. Then with the other hand lift the Rollator at the tubular bow (F).

5. Using the Seat (accessory)-Fig. 2
   The seat (M) is screwed firmly to the frame (F).
   • Before using the seat, activate the permanent brake (H), see Step 4.
   • When the sun shines the seat may get hot! Therefore, check the temperature of the seat with your hand. If necessary, allow the seat to cool down, or place a cushion on the seat.

6. Adjusting the Brakes-Fig. 5
   Loosen the counter nuts (L) and then adjust the brake with the adjustment screw (K).
   Be sure that when the brake is released, the wheels are allowed to turn freely, and when the brake levers are pulled the wheels are firmly arrested. Then retighten the counter nut (L).
   Safety Instructions and Inspection

• After the first time set up and before each use, always conduct a visual inspection of the Rollator for deficiencies. Check the screw connections to be sure they are tight.  Tighten if necessary using the appropriate tools. If you have any doubt, then do not use the Rollator. Contact a specialized dealer.
• Before each use, check over the folding mechanism to be sure it has clicked into its final position.
• Check the function of the brakes and the permanent brake function as well.
• Use the grasp handle only for raising the Rollator and as a backrest.
• DANGER OF TIPPING!
  For moving the Rollator only use the rubberized handles.

Care and Maintenance

The surface of the aluminum tubing has been provided with a paint coating. The Rollator can be cleaned with a commercially available cleaning or disinfecting agent – always follow instructions for use. All moving parts are permanently lubricated. Inadequate or negligent care and maintenance lead to limitations or annulment of product liability by the Manufacturer.
Allow your Rollator to be checked over by a specialized dealer once a year!

Reuse
The product is intended for reuse. The reuse (life) depends on the product state.
Before the re-use of the device, maintenance must be carried out and the appropriate instructions for security, care, and maintenance must be observed.
This review shall exclude a possible improper use caused by obvious or invisible damage.
Please refer to the Medical Device Directive (MDD) and the regulation for operators (MPBetreibV).

Life
The expected life of the products listed in this manual when used in accordance with safety instructions, maintenance intervals, and care instructions is 3 years.
Beyond this period, the product can be set used only in a safe condition. Maintenance should be done at least every six months. Specific requirements of the product, due to the use of the patient, cause shorter maintenance intervals.

Warranty
The products listed in this manual are provided with a warranty of 24 months. Wear parts and damages to the products due to improper use are excluded.

Figures:

Technical Specifications

(Technical specifications are subject to change without notice!)

The angle between the longitudinal center line of the handgrip and movement direction: 0 degrees (parallel)

• Weight-only accessories Production-dependent tolerances of tubes +/- 15 mm

Spare Parts and Accessories

Advisory!
Always keep the User Instructions in case of future use.
Always bring a copy of the User Instructions with you whenever you leave the house so that in the case of an emergency another person will be able to operate the Rollator. The identical serial number in the User Instructions is also printed on the nameplate of the product. For complaints or questions, always provide the model, serial no. and the  User Instructions no. The user instructions and the maintenance manual are downloadable on our homepage.

References

• Rebotec Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>