nordlux 211043 Ethan 4 Spot Matt Ceiling Light Instruction Manual
- June 1, 2024
- nordlux
Table of Contents
nordlux 211043 Ethan 4 Spot Matt Ceiling Light
Product Information
Specifications
- Model: ETHAN 211043
- IP Rating: IP20
- Class: II
- Max Wattage: 4x50W
Product Usage Instructions
Installation Guidelines
- The lamp should only be installed in areas where direct contact with water cannot occur.
Electrical Safety
- Ensure that the lamp is not connected to a power source exceeding the maximum wattage of 4x50W.
Class II Insulation
- The lamp possesses double insulation, eliminating the need for grounding.
FAQ
- What does the IP20 rating mean?
- The IP20 rating indicates that the lamp is protected against solid objects larger than 12.5mm and does not have protection against water ingress.
- Can I use bulbs of higher wattage than recommended?
- No, do not exceed the maximum wattage of 4x50W to prevent damage to the lamp and ensure safety.
Dimensions
Installation Instructions
Symbols
- IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
- Class II: The lamp is double-insulated and does not need to be connected to the yellow/green earth wire.
- Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances that may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.
- The lamp is only suitable for connecting directly to the mains.
- The mounting instruction must not be discarded.
- Do not exceed the maximum wattage.
- IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice.
- General maintenance: Use a soft, dry cloth for dusting, and a soft cloth wrung in lukewarm water (<50°C) with a mild detergent to remove grease stains or similar. Never use detergents containing abrasive or solvent. Only switch on the lamp once all the water has evaporated.
CONTACT
- www.nordlux.com
- Nordlux A/S
- Ostre Havnegade 34
- DK-9000 Aalborg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>