TOMAHAWK TFS6H 6-Inch Early Entry Walk Behind Concrete Saw Instructions

June 4, 2024
TOMAHAWK

TOMAHAWK TFS6H 6-Inch Early Entry Walk Behind Concrete Saw

TOMAHAWK-TFS6H-6-Inch-Early Entry Walk-Behind-Concrete-Saw-
product

ADJUSTING THE BLADE

The Tomahawk Early Entry Concrete Saws’ default blade setting is adjusted to the max blade depth of 1-3/16″ (ASTM Standard Specification for Portland Cement). If a shallower cut is desired, follow these steps:

  1. Loosen the depth adjustment nut (1) above the front right wheel, counter-clockwise with a 13mm wrench.
  2. Turn the depth stop adjustment bolt (2) clockwise with a Size 5 Metric Allen wrench. Each full revolution of the bolt will reduce the cut depth by 1/8″.
  3. Make sure the rear wheels are flat on the ground by pushing down on the rear of the main frame.
  4. Follow an existing saw joint cut for approximately one foot to confirm that the proper/desired cut is achieved.

www.TOMAHAWIK-POWER.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals