Bestter T183A Series Smart Toilet User Manual

Bestter T183A Series Smart Toilet User Manual

Safety Precautions

To prevent damage to the unit and possible injury to users, please follow the safety warnings. Please be sure to carefully read through the user’s manual before installation.
Keep the user’s manual after installation to refer to for troubleshooting advice.

Symbols And Meanings

WARNING Could result in serious injury or death.

The following symbols are used to indicate important safety precautions when using the product.

| Prohibited.
---|---
| Pay close attention; caution.
WARNING

Prohibited| It is not allowed to continue using if the product has some breakdown: Product heat abnormally; Product is smoking; Product has abnormal sound and smell; Product is leaking, broken or damaged; Toilet pan is blocked, etc. When the breakdown happens, if it do not handle in time and continue using, it might trigger the problems like electric shock, injury, firing or water penetration inside the room, etc.
Banana oil, gasoline, putty-powder, nylon brush or other (non-neutral) detergent is not allowed to clean the plastic parts like toilet seat cover, otherwise it might trigger chemical reaction or leakage, damage the product and cause people injury.
Loosen electric outlet is not allowed as it might trigger electric shock or firing.
It is not allowed to pull out and plug in the electric plug by wet hand as it might trigger electric shock or firing.
It is not allowed to touch the electric plug when it is thundering and lighting as it might trigger electric shock.
It is not allowed to use other electric resource, the load of using electric outlet could not be too big, as it might trigger firing due to over-heat.
Detergent, water, wash detergent or urine is not allowed to spot into body and electric outlet, as it might trigger electric shock or firing.
It is not allowed to let child standing or put heavy goods on the seat and cover, toilet pan or seat body, heavy hitting or knocking is not allowed.
It is not allowed to disassemble, repair this product, (it must go for professional repair person service if it is necessary to repair), otherwise, it might cause the damage to this product.
Do not randomly damage the electric plug and electric line, if the electric line, electric plug is damaged, please do not use it any longer or repairby oneself, it must be repaired by professional person, otherwise, it might trigger short-circuit, electric shock, firing.
If the power cord is not long enough, please do not use a extension cord.
The stove or lighted cigarette is not allowed to be placed next to the toilet pan, cigarette butt etc is not allowed to be thrown into toilet pan.
Do not block the airopenings of the product. Keep the air openings free of lint, hair, and the like.
Do not use while bathing
WARNING

Caution| When using in shower room, please install air exchange equipment to ensure the air in the shower room not too moist. This product is electric products, it is not allowed to install it in the place that is easy high wet, easy split by water, otherwise it might trigger electric shock or fire.
Please ensure to cut off the electric power before washing this product, do not use water to directly wash this product, otherwise it might trigger the electric shock or fire.
Please put and use this product in the shadow, must not put directly beneath the sun, otherwise it might cause the color-fading, or burn the surface of product due to the instability of temperature.
Do not use industrial water, wastewater, seawater, reclaimed water and other sewage, otherwise it may cause skin inflammation and other problems.
Persons (including children) with physical, perceptual, intellectual disabilities or lack of experience and common sense need to use the product under the guidance or supervision of someone else, or they may cause electric shock, injury or fire.
Please notice the assembly location of electric wiring plug, electric plug should be the water-proof plug. Assembly location of electric plug must be over 0.5m( 19.7in) above the floor, and far away from shower, bathtub, otherwise it might cause electricity leakage.
When installing this product, please remove the old hose assemblies owned by users and install them with new hose assemblies. Do not reuse the old hose assemblies to avoid related safety problems.
The grounding wire of this product must conform to the stipulated construction mode, and the three-level grounding structure must be grounded, otherwise the use of this product is prohibited.
Electric plug need to plug in the electric with air switch.
In the same room where this product is installed, a switch of water inlet angle valve needs to be installed at a location within reach. It is used in emergency situations to cut off the waterway of this product without the aid of tools; otherwise, unexpected failures of this product may occur and it will cause user loss.
If you have not used this product for a long time, please close the angle valve, press the water release button to drain the water of ceramic itself and cut off the power; When using the product again,please wash first to prevent water quality problems and skin diseases.
When the outside air temperature is lower than 0°C, in order to prevent water leakage caused by external filter and other accessories likely freezing, please be sure to close the water inlet valve and drain the left water; If pipe has been frozen, please raise the room temperature and wait for pipe normal then use the toilet, otherwise the product may not be used normally.

Component list

• SMART TOILET
  

• REMOTE CONTROL
  

• SCREWS & EXPANSION NUTS (2pcs)

• TWO 7TH BATTERY

• USER MANUAL
  

• SEALING RING

• INLET VALVE
  

• FILTER
  

• TEFLON TAPE

• 15/16-14UNS ADAPTER

Specifications

(water pressure 0.2MPa, 3 levels adjustable）
Bidet wash
Swing| Swing cleansing back and forth
Massage| Pulsing cleansing、Powerful cleansing
Water flow and nozzle| 3 levels adjustable
Water temperature range| About 68°F-107°F（4 levels adjustable）
Safety device| Temperature limit circuit, thermostat, thermal fuse
Drying| Warm wind temperature| About 89°F-134°F（3 levels adjustable）
Safety device| Bimetallic thermostat, thermal fuse
Seat| Surface temperature| 4 levels adjustable, room temperature about 107°F
Safety device| Thermal fuse
Self-cleaning| Antibacterial seat/nozzle| Antibacterial material/stainless steel nozzle
Automatic nozzle cleaningPre-wetting| Self-cleaningPrewet the toilet bowl before each use
|
Toilet| Flush consumption| 1.28Gpf/4.8Lpf
Flushing mode| Siphon jet
Rough-in| 305mm（12.0 in）
Rated power Water supply| 1150W| Maximum power| 1600W| Waterproof level| Abo IPX4.4kgut 35
temperature| 39°F-95°F| Ambient temperature| 37°F-104°F| Net weight| (about 78 lb)
Dimension| (Aboutt62860.8*31950.4 *44137.m4 imn)| Water supply pressure| M0.1in6iMmPuam(flnoewcersastaer2y0dLy/nMainm)ic pressure:Maximum static pressure: 0.75MPa

1. Rated power: Set the water volume, seat temperature and water temperature to the highest level under the conditions of ambient temperature 68°F±41°F, inlet water static pressure 0.18MPa±0.02MPa, and inlet water temperature 59°F±33°F.
   Turn on the bidet function, and test the average power within 60 seconds after the temperature of the outlet water stabilizes.

2. Maximum power: Set the water volume, seat temperature, and water temperature to the highest level under the conditions of an ambient temperature of 73°F±35°F, an inlet static pressure of 0.18MPa±0.02MPa, and an inlet temperature of 41°F±33°F. Turn on the bidet function and continue to work stably at the maximum power for a cleaning cycle.

3. Water consumption test: Test the water consumption separately under the water pressure 0.16Mpa and  .55Mpa three times. Get six values in total,then divide the sum by six and the average is the nominal water consumption.

Parts Names

Product Drawings

Power and Water Supply Connection

Caution electric shock!

※ If the power cord is not long enough, please use extension line which is made by certificated manufacturers.
※ Only for reference.

Installation Precaution

We reserve the right to change, update, modify, alter, redesign this manual/product or its policies without prior notice!

We shall not be liable for any injuries or property damages in connection with this product during installation or use of the product!

The product must be installed by a fully insured and licensed plumber only. Installation of the product by anyone other than fully insured and licensed plumber shall void limited warranty. We recommend that the licensed plumber have experience in the installation of the product.

During unpacking the product and prior to installation inspect your new product for any damages or missing parts. Do not attempt to install or operate the product if the product is damaged.

Installation Tools

• Hammer Drill

• Caulking Gun

• Tape Measure

• Adjustable Wrench

Product Installation

Install the water inlet valve

Clean the ground and dry the water before installation. Mark the central lines of the draining outlet, and install the inlet valve on the wall.

Caution electric shock!

Mark the curve of ceramics

Align the drain hole of ceramic with the central line. Mark the curve of ceramics for later installation.
Silicone sealant application: Glue the outline with silicone sealant.

Toilet installation(Method 1)

Sealing ring installation
Gently tilt the toilet sideways until it rests on the side surface.
Install the sealing ring evenly along the outlet, and the small end of the sealing ring facing the toilet.
Glue the edge of toilet bottom with silicone sealant, place the toilet base along the outline and position the toilet base.

Toilet (ceramic) installation
Lift the toilet, take the floor drain as a reference, align the ceramic body of the toilet with the ceramic contour line drawn on the ground, and slowly put the ceramic on the ground so that the two marks overlap. After overlapping, press the ceramic down (can be pressed by the weight of the human body) so that the sealing ring fully contacts the ground.
※Do not move the ceramic or shake it left and right after the marks are overlapped, otherwise the seal produced by the sealing ring may be damaged and cause water leakage.

Toilet installation(Method 2)

Remove the bidet seat
Remove the fixing screws of the toilet; remove the connecting pipes and wires of the toilet, separate the bidet seat from the toilet.

Sealing ring installation
Place the sealing ring onto the flange.

Ceramic installation
Glue the edge of toilet bottom with silicone sealant.
Line up the toilet base over the flage screws.
Place the toilet base and secure the flange bolts.
Glue the edge of toilet bottom with silicone sealant, place the toilet base along the outline and position the toilet base.

Bidet seat installation
Adjust the bidet seat to match the toilet, use screws to fix the bidet seat on the toilet.

Connect the water inlet valve and filter

As shown in the following figures.

NOTE:
Do not use the smart toilet immediately after installation, use it after 48 hours.

1. Install the part A water inlet valve.
2. Connect part B and part C to the part A water inlet valve.
3. Connect part D filter to the part A water inlet valve, and connect part E water inlet hose to the part D filter.
4. Finished, connect to the power.
   
   

Connect to the power
Only connect this product to a properly grounded outlet.

Using the product for the first time

1. Connect to the power and open the water inlet valve.
   Check every function buttons of the remote control and side control. such as rear/bidet wash, dry, flow adjustment, water temp adjustment, massage cleaning, swing cleaning, LED, seat temp adjustment, etc.

2. Rear/Bidet wash performance test.
   Touch the seat sensor built-in the seat with hand to activate the smart toilet and at the same time press Rear/Bidet button to check if the Rear/Bidet wash functions work properly.

Instructions for Remote Control Installation

Method 1:

1. Remove off the double-sided adhesive surface on the back of the remote control holder.
   

2. Clean dust, grease, water droplets on the walls and wipe them clean.

3. Press the remote control fixed seat with double sided tape on it. Press it evenly for 3 to 5 minutes.

Attach the remote control fixed seat to the wall.
Note: The method is applicable to glazed tiles, glass and smooth wall.

Method 2:

1. Make two holes in the wall with a drill bit.
   Note: the position of the hole shall be satisfied for user to get the remote control conveniently when sitting on the seat.

2. Point the expansion plug on the wall at the fixing hole of the remote control and lock the bolts.
   

Put the remote control on the fixed base after installing the battery.

Tips:
※ Please place remote control on the holder after each use. Do not let remote control fall on hard ground, otherwise it would cause malfunction or damage to the remote.
※ Do not spill water on remote control or drop it into water, otherwise it would cause malfunction or damage to the remote.

Remote Control Panel Overview

Remote control to code:
Leave the seat state,Long press the knob on the side of the fuselage for 3s, issued a drop.Long press the remote control woman wash + drying key, enter the code mode, press the water temperature key to select the code value, press the stop key, long drop, the code success. The code should be completed within 2 minutes, and the code can not be matched after the success.

TIPS:
Please keep sitting and make sure the seat sensor is activated before operating the smart toilet by remote or side control.

Using Instructions

STOP
Press the button, all functions stop.

REAR / SWING
Short Press the button to activate the posterior wash function. It will stop after 2 mins automatically or by pressing the stop button. This function will also stop when user leaves.
※Under Posterior/Feminine wash mode, Long Press the button you can activate the swing function. The nozzle sprays back and forth automatically. Press the button again to stop

BIDET/SWING
Short Press the button to activate the feminine wash function. It will stop after 2 mins automatically or by pressing the stop button. This function will also stop when user leaves.
※Under Posterior/Feminine wash mode, Long Press the button you can activate the swing function. The nozzle sprays back and forth automatically. Press the button again to stop.

DRY
Press the button，you can activate the drying function.

FLUSH
Press the button to flush the toilet.

POSITION
Under posterior wash or feminine wash mode, pressing > button to move the spray position forward, pressing < button to move the spray position backward.
The spray position is 3 levels adjustable, the initial level is 2th. Under different levels, it has corresponding indicators.

SELF-CLEANING FUNCTION
Press the “Self-cleaning” button, the spray arm can be retracted back and forth, and clean it self.

MASSAGE

Under Posterior/Feminine wash mode, you can activate the massage function.

1. Impulse massage: the nozzle sprays with impulse water flow to clean the body.
2. High pressure massage: the nozzle sprays with high pressure water flow to clean the body.

※ Massage loop control: Impulse massage-High pressure massage-Stop.

ECO
Press the button to enter energy saving mode. Under energy saving mode, seat temperature is low(level 1); Night light turns off, only power indicator turns on.
※Energy saving mode will resume the seat temperature and video display when used.
※Energy saving mode will be restored when user leaving

SEAT TEMPERATURE ADJUSTMENT
Every time you press the button, the seat temperature will be adjusted by one level. and 3 levels will be cyclically adjustable and closed.

WIND TEMPERATURE ADJUSTMENT
In the drying state, every time you press the button, the air temperature will be adjusted by one level, and 3 levels will be cyclically adjustable.

WATER TEMPERATURE ADJUSTMENT
Under posterior wash or feminine wash mode, each time you press the “water temperature” button, the water temperature is adjusted by one level, 3 levels can be cyclically adjusted and normal temperature (long press the “water temperature” button to Enter the normal temperature ) ,default setting in level 2, and thecorresponding level indicator light is on.

FLOW ADJUSTMENT
Under posterior wash or feminine wash mode, pressing “+” button to increase the water flow, pressing “-” button to decrease the water flow.
The flow is 3 levels adjustable, the initial level is 2th. Under different levels, it has corresponding indicators.

COMBINATION FUNCTION KEYS
Stop +Self-cleaning: Long press for 5 seconds to clean the spray bar by Manual
Stop + Bidet wash: Long press for 5 seconds to activate or deactivate the night light function
Stop + Massage: Long press for 5 seconds to activate or deactivate the kick flip function (some models do not have this function)
flush + Rear wash: Long press for 5 seconds to activate or deactivate the Pre-wetting (some models do not have this function

Side Knob Control Instruction

User sitting

• Bidet wash: Twist the side knob forward, spray wand extend, bidet wash works about 2 minutes.
• Rear wash: Twist the side knob backward, spray bar extend, rear wash works about 2 minutes.
• Nozzle position: Under bidet/rear wash, twist the side knob forward or backward to adjust nozzle position.
• Stop: Under bidet/rear wash, press the side knob to stop washing.
• Drying: press and hold the side knob for 2 seconds to start air drying;
• Wind temp: Twist the side knob forward to increase the wind temp, backward to decrease the wind temp.
• Flush: Press the side knob to flush the toilet.

User standing

• Press the side knob to flush the toilet.

Kick sensing

• When the lid and seat ring are closed, touch the kick sensor lightly to open the lid automatically; when the lid is open and the seat ring is closed, touch the kick sensor lightly to open the seat ring automatically; when the lid and seat ring are open, touch the kick sensor lightly to achieve automatic flushing.

Motion sensing

• When the lid and seat are closed, the lid will be automatically opened by approaching the toilet; When the lid or seat is opened and the seat sensor is activated, after about 90 seconds, the lid and the seat will automatically close, when user leaves.
  When the lid or seat is opened and the seat sensor is not activated, after about 150 seconds, the lid and the seat will automatically close, when user leaves.

Side button description

Drying on/off:
Press and hold“+”or“-”for about 2 seconds to turn on or off the drying in the seating state and non-rinsing state.
Air temperature adjustment:
In the drying state, short press“+”or“-”to adjust the air temperature.
Seat temperature adjustment:
In the non-flushing and non-drying state, short press “+”or“-”to adjust the seat temperature.
Water temperature adjustment:
Press“+”or“-”in the flushing state to adjust the water temperature.
Flushing function:
Short press the flushing button to start the flushing.
Night light function:
Press and hold the“-”for about 5 seconds to turn on or off the night light function when you are not seated.
Auto off seat flushing:
Press the flushing and“-”at the same time for about 5 seconds in the non- sitting state to open or close the automatic flushing function of leaving the seat.
Foot sensing flush:
Press the flushing and the“+”at the same time for about 5 seconds in the non- sitting state to  turn on or off the foot sensing flush.
Power-off flushing function:
When the power is off, connect to the USB type C with a power bank to achieve the manual, foot sensing and off seat flushing functions(please do not cut off the power when flushing).

Maintenance and Cleaning

Maintenance and cleaning of toilet lid and seat

1. Turn off the power, close the water outlet valve.

2. Use soft cloth to clean the lid and seat.
   ※Be careful not to allow water to get inside or leave detergent in the gap between the top unit and the bowl unit.
   ※Avoid using materials that will damage the surface. Clean the surface with a soft and wet cloth.
   ※Corrosive chemicals or cosmetics (such as cleaners containing abrasive compounds and aftershave) can not be used to clean the lid and seat.

3. Turn on the power, open the the water outlet valve.

Maintenance and cleaning of the toilet bowl

1. Turn off the power.

2. Use toilet brush and toilet detergent to clean the bowl.
   ※Corrosive chemicals (such as cleaners containing abrasive compounds and strongly acidic cleaners or strong alkaline cleaners) should not be used to clean the bowl.
   ※Wire brush or abrasive nylon scrubbing brush should not be used to clean the bowl.

3. Turn on the power.

Cleaning The Water Filter

1. Turn off the power Close the water outlet valve.
   

2. Remove the water-inflow filter from the inlet hose.

3. Take out the filter by using a flat-blade screwdriver to unscrew the filter.
   

4. Remove the filter and rinse it with clean water.

5. Install the filter screen as it is, be sure to tighten it, otherwise it will cause water leakage.
   

How to do?

1. When the toilet can not flush automatically due to power outage.
   Connect the smart toilet with power bank through the TPYE-C interface.

2. When the toilet can not flush automatically due to water outage.

3. Flush the sewage in the toilet away with basin.

4. After flushing, add water to the toilet to avoid stinking.

5. When the product is left unused for long time

6. Turn off the power, and close the tee valve, drain the water in the inlet hose.

7. Especially in winter, the water inside the hose of the toilet should be discharged to avoid freezing

Trouble Shooting

the plug or detect the power socket.
Power outage.| Wait until the power supply restored.
The leakage protector is disconnected.| Restart the product.
**** Rear cleaning Bidet cleaning DryTevheentowilheetndothees bnuottflounsihs pressed.| Tohuet. wand extends but water does not come Water pressure is weak.| Wait until the water supply restored.
Open the water outlet valve.
Ifsortehiegnwmatearttfielrt?eCr lderaaninovrarlevpelaclcoegtgheedfiwltiethr.
Low water temperature.| tUesme preemraotuterec.ontrol to adjust the water
Tsihtteinsge.at sensor does not sense someone| Sit on the toilet seat properly.
sTuhdedneonzlzyle. stops cleaning| tIfhtehseeuastesrenmsovr ecsantonootfadsettoecrtleinavshesortthteimseea.t,| “SRiteoanr”thoer“toBiildeetts”ebatupttroonpaegrlayi,nt.hen press
Lreoawr/wbiadteetrwpraesshs.ure under Water comes out| Fbillotrcakteiodn screen of inlet angle valve may be| Clean or replace the filter.
The water-inflow hose may leak| Check the hose and tighten it.Disconnect the power plug and wait
uwnaenxdp.ectedly from the| Abnormal operation| agbaoiunt. 1 minutes before inserting it
Wunaetxepr ecoctmedelsyofurotm theinlet hose.| The inlet hose is defect.| Replace the inlet hose.
Tgehtewtoairlmet.seat does not| Tsihtteinsge.at sensor does not sense someone| Sit on the toilet seat properly.
Low seat temperature.| tUesme ptheerarteumreo.te control to adjust seat

Maintenance Service Sheet

Product| | Product code|
---|---|---|---
The selling store| | Purchase date|
Province City| Dealer ( signature ):

Free maintain regulation:

1. We warrants our products to be free from defects in materials and workmanship during normal use when properly installed and serviced, for a period of three (3) years from date of purchase. This limited warranty is extended only to the ORIGINAL PURCHASER of the product and is not transferable to any third party, including but not limited to any subsequent purchaser or owner of the product. This warranty applies only to our product is purchased and installed in USA and Canada.
2. The obligations under this warranty are limited to repair, replacement or other appropriate adjustment, at our option,of the product or parts found to be defective in normal use, provided that such product was properly installed, used and serviced in accordance with instructions. We reserves the right to make such inspections as may be necessary in order to determine the cause of the defect.
3. This warranty does not apply to the following items:

a) Damage or loss sustained in a natural calamity such as fire, earthquake, flood, thunder, electrical storm, etc.
b) Damage or loss resulting from any accident, unreasonable use, misuse, abuse, negligence, improper care, or maintenance of the product.
c) Damage or loss resulting from sediments or foreign matter contained in a water system.
d) Damage or loss resulting from the quality of water in the region where the product is used.
e) Damage or loss resulting from improper installation or from installation of the product in a harsh and/or hazardous environment, or improper removal, repair or modification of the product.
f) Damage or loss resulting from electrical surges or lightning strikes or other acts which are not the fault of the product or which the product is not specified to tolerate, including failure to use the factory equipped cord and plug or use of a loose or faulty electrical outlet or use of a current or socket other than a 120V, 60Hz electrical current from a GFI (ground, fused) socket.
g) Damage or loss resulting from normal and customary wear and tear, such as gloss reduction, scratching or fading over time due to use, cleaning practices or water or atmospheric conditions, including but not limited to, the use of bleach, alkali, acid cleaners, dry (powder) cleaners or any other abrasive cleaners or the use of metal or nylon scrubbers.

Executive standard: CONFORMS TO UL STD. 1431/UL STD. 1591 ASME A112.4.2-2021 Warranty period: within three years from the purchase date.

• Due to the constant improvement about our products, we will keep the final interpretation of products change.
• If the products you bought exist differences from the instruction, please in kind prevail.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>