StarTech com XXXL-PRIVACY-SCREEN Privacy Filter User Guide

: June 10, 2024
: StarTech com

Table of Contents

Product ID
Package Contents
Requirements
Install the Privacy Filter
- Adhesive Strips
Mounting Tabs
Regulatory Compliance
Warranty Information
Limitation of Liability
Customer Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

StarTech com XXXL-PRIVACY-SCREEN Privacy Filter

Product ID

XXXL-PRIVACY-SCREEN / PRIVSCNMONXX / PRIVACY-SCREEN-XXXX / XXXXX-PRIVACY- SCREEN

Product ID

*Product may vary from image

Component	Function
Privacy Filter

Privacy effect when viewing the screen at angles greater than 30° off-center from the Left or Right
The total Field of View is 60 degrees

Mounting Tabs|

Secure the Privacy Filter to the Display Bezels

Note: The adhesive on the Mounting Tabs becomes less effective with frequent removal/reapplication

Adhesive Strips (Not shown)|

Secure the Privacy Filter to the Screen surface

Note: The Adhesive Strips become less effective with frequent removal/reapplication

Finger Notch|

Helps to grab the Privacy Filter for removal

Package Contents

Privacy Screen x 1
Set of Adhesive Strips x 1
Set of Mounting Tabs x 1
Wiping Cloth x 1
Quick Start Guide x 1

Requirements

For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.startech.com/suppor

Install the Privacy Filter

Note: For installations intended to be permanent or if the display features slim bezels, it is recommended to use the Adhesive Strips.
For installations that require frequent removal of the Privacy Filter, it is recommended to use the Mounting Tabs.

Adhesive Strips

Clean the Screen and Bezels using the Wiping Cloth.
Select the side of the Privacy Filter intended to Face Outward (i.e. matte or glossy). Place the Privacy Filter on a clean and flat surface with the selected side Facing Down.
Remove all Adhesive Strips from the Transparent Lining.
Carefully align the Adhesive Strips along the Top, Bottom, Left, and Right edges of the Privacy Filter. Apply Firm Pressure to affix them to the Privacy Filter.
Carefully remove the Protective Backing from the Adhesive Strips
Attach the Privacy Filter to the Screen, starting from the Bottom and working towards the Top. The Adhesive Side should face toward the Screen.
Apply Gentle Pressure on the Locations where the Adhesive Strips were installed.
Clean any fingerprints on the Privacy Filter using the Wiping Cloth.

Mounting Tabs

Clean the Screen and Bezels using the Wiping Cloth.
Separate the Mounting Tabs.
Remove the Protective Backing from the Mounting Tabs.
Install One Short and One Long Mounting Tab on the Left Bezel.
Repeat Step 4 for the Right Bezel.
Install One Short Mounting Tab on the Bottom Bezel.

Note Depending on the display size, additional Mounting Tabs may need to be installed on the side or bottom bezels.
Slide the Privacy Filter in-between the Mounting Tabs and the Screen.
Clean any fingerprints on the Privacy Filter using the Wiping Cloth.

Regulatory Compliance

Symbol

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.