BenQ TRY01D Remote Control Dongle User Manual

: June 10, 2024
: BenQ

Table of Contents

BenQ TRY01D Remote Control Dongle User Manual
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BenQ TRY01D Remote Control Dongle User Manual

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents of this document. BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents thereof without obligation to notify any person of such revision or changes.

The screenshots in this document are for reference only and may differ from the actual design.

Copyright

Copyright 2021 BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.

Important safety instructions

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Safety notice for remote control

Do not put the remote control in the direct heat, humidity, and avoid fire.
Do not drop the remote control.
Do not expose the remote control to water or moisture. Failure to do so could result in malfunction.
Confirm there is no object between the remote control and the remote sensor of the product.
When the remote control will not be used for an extended period, remove the batteries.

Battery safety notice

The use of the wrong type of batteries may cause chemical leaks or explosion. Please note the following:

Always ensure that the batteries are inserted with the positive and negative terminals in the correct direction as shown in the battery compartment.
Different types of batteries have different characteristics. Do not mix different types.
Do not mix old and new batteries. Mixing old and new batteries will shorten battery life or cause chemical leaks from the old batteries.
When batteries fail to function, replace them immediately.
Chemicals which leak from batteries may cause skin irritation. If any chemical matter seeps out of the batteries, wipe it up immediately using a dry cloth, and replace the batteries as soon as possible.
Due to varying storage conditions, the battery life for the batteries included with your product may be shortened. Replace them within 3 months or as soon as you can after initial use.
There may be local restrictions on the disposal or recycling of batteries. Consult your local regulations or waste disposal provider.

Package contents

Open the sales package and check the contents. If any item is missing or damaged, please contact your dealer immediately.

Before discarding the package, check that you haven’t left any accessories inside the box.
Dispose of packaging materials wisely. You can recycle the cardboard carton. Consider storing the package (if possible) for future transport of the display.
Do not leave plastic bags within reach of young children or babies.

Remote control / Dongle

Remote control - Dongle

Remote control important notice

This remote control applies only to a specific models and/or operating systems. Contact your reseller if any question.
The function keys can work only when the enclosed dongle is inserted to the BenQ IFP.
The remote control and the enclosed dongle have been paired in default.

Using the remote control

Installing remote control batteries

Installing remote control batteries

Using the BenQ IFP by remote control

Insert the enclosed dongle into BenQ IFP’s USB port.
You can activate functions on the screen once the remote control is connected to its enclosed dongle as a receiver.
For detailed function of each button, please refer to Remote control on page 4.

Pairing the remote control and the enclosed dongle

If you are experiencing issues using the function key on the remote control, please follow the steps and pair again the remote control to resolve the issue:

Insert the enclosed dongle to IFP’s USB port and place the remote control near it.
Press the and at the same time, and the indicator light starts flashing.
The pairing is completed once the indicator stops flashing.

Remote control usage tips

To power on/off the display, aim the top front of the remote control directly at the display’s remote control sensor window when you press the buttons.
Avoid getting the remote control wet or store it in humid environments (like bathrooms).
If the display’s remote control sensor window is exposed to direct sunlight or strong light, the remote control may not operate properly. In this situation, change the light source, readjust the angle of the display, or operate the remote control from a location closer to display’s remote control sensor window.

Remote control usage

Regulatory notices for remote control

Accessing regulatory labels

Regulatory labels, which provide country or regional regulatory information, such as CE, RCM and MIC are physically located on the back of the device.
The device also provide electronic regulatory labels (e-labels) that can be accessed through the display system settings.

To view electronic regulatory labels:

Turn on or restart the display, and then go to the system setting via either one of the following:
- Press on the remote control.
- Press the Menu button on the front panel.
- Drag the system menu up from the bottom-center of the screen.
Go to System > About > Legal information
Go to Legal information
Select Remote control electronic label to view the list of available electronic label items.

Regulatory statements

This document provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for your product. Some of these notices may not apply to your product.

FCC Statements (for the United States only)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Supplier’s Declaration of Conformity

Responsible Party Name: BenQ America Corp.
Address: 3200 Park Center Drive, Suite 150, Costa Mesa, CA 92626
Telephone: 714-559-4900
Declares below product complies with FCC Part 15 Subpart B
Product name: Dongle
Model number: TRY01D

Supplementary information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

UKCA Declaration of Conformity

The object of the declaration described above is in conformity with the relevant UK harmonisation legislation:

Electromagnetic Compatibility Regulations 2016
Electrical Equipment (Safety) Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012

CE DOC

DECLARATION OF CONFORMITY

The device complies with the requirements set out in the Council Directives relevant Union harmonisation legislation:

Laws of the Member States relating Electromagnetic Compatibility (2014/30/EU)

Low Voltage Directive (2014/35/EU)

RoHS Directive 2011/65/EU & (EU) 2015/863

Radio Equipment Directive 2014/53/EU

WEEE Directive 2012/19/EU

EU REACH SVHC Disclosure on Candidate List

REACH (Registration, Evaluation,Authorization and Restriction of Chemicals, EC 1907/2006) is the European Union’s (EU) chemical substances regulatory framework. REACH requires BenQ Corporation to provide customers with sufficient information on Substances of Very High Concern (SVHC) contained in products in concentration above 0.1% weight by weight (w/w) to allow safe use of the product.

RoHS Statement

This product is compliant to implemented RoHS (Restriction of Hazardous Substances ) type regulations worldwide, including but not limited to China, India, Japan, Korea and European Union.

EU RoHS

Chemical Substance Table

*: PCBA consisted of bare printed circuit board, soldering and its surface-mounted elements, such as resistors, capacitors, arrays, connectors, chips, etc.

NOTE 1:The “O” indicates that the percentage content of the substance to be calculated is not exceeding the reference percentage content of EU RoHS directive (2011/65/EU & EU 2015/863).

NOTE 2:The “exempted” item means that the specified chemical substance corresponds to the items exempted by the EU RoHS directive (2011/65/EU & EU 2015/863).

For India only

India RoHS

Restriction on Hazardous Substances statement (India)
This product complies with the “India” E-waste Rule 2016″ and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or PolyBrominated Diphenyl Ethers in concentrations exceeding 0.1 weight% and 0.01 weight for cadmium except for exemptions set in Schedule 2 of the Rule.

E-Waste Declaration for India

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about E-Waste and the places to drop off your waste equipment for recycling in India please visit https://www.benq.com /en-us/support/recycling/global-recycle.html.

WEEE

WEEE directive

Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union.

This symbol on the product or on the packaging indicates that this can not be disposed of as household waste. You must dispose of your waste equipment and/or battery by handling it over to the applicable take-back scheme for the recycling of electrical and electronic equipment and/ or battery. For more information about recycling of this equipment and/or battery, please contact your city office, the shop where you purchased the equipment or your household waste disposal service. The recycling of materials will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and environment.

Recycling information: See https://www.benq.com/en-us/support/recycling /global-recycle.html for details.