KREAFUNK Witray Storage Solution with Wireless Charging Instructions

KREAFUNK Witray Storage Solution with Wireless Charging

WITRAY Storage Solution with Wireless Charging

The wiTRAY is a storage solution with wireless charging capabilities. It is designed to charge compatible mobile devices without the need for cables or adapters. The product comes with a USB-C port for power input and has a maximum charging output of 10W.

Technical Specifications

• USB-C input: 5V/2A 9V/2A (MAX)
• Maximum charging output: 10W
• Minimum charging output: 5W

Safety and Maintenance Instructions

Before using the wiTRAY, please read the operation manual carefully. The safety and maintenance instructions in the manual are important to ensure the proper use and longevity of the product.

• Keep the surface of the product away from sharp objects to avoid damage to the plastic parts.
• Use only power supplies with a voltage rating of 5V / 1A to prevent severe damage to the product.
• Avoid placing the lithium battery near fire or intense heat to prevent the risk of explosion.
• Do not place the product in a high-temperature environment during charging to prevent overheating and damage.
• Keep the product in a dry place and avoid using it in wet or dirty conditions.
• Do not throw or drop the product as it may cause damage and malfunction.
• Never attempt to alter or disassemble the product. Contact your seller for further assistance if there is a problem with the product.
• The wiTRAY is not suitable for use as a travel adapter.
• Keep the product away from high voltage devices (highest 5V).
• Avoid placing the product too close to magnetic stripe cards or chip cards (credit card, ID card, etc.) to prevent magnetic failure.

Product Usage Instructions

To use the wiTRAY, follow these instructions:

1. Connect the USB-C port of the wiTRAY to a power supply with a voltage rating of 5V / 1A.
2. Place your compatible mobile device on the charging pad of the wiTRAY. Make sure that there is no obstruction between the mobile device and the charging pad.
3. The charging status of your mobile device will be indicated by the LED light on the wiTRAY. A blue light indicates that the mobile device is charging, while a red light indicates that there is no device on the charging pad or that the device is not compatible with wireless charging.

OVERVIEW

ON/OFF

ALIGNMENT

POWER SOURCE

TECHNICAL SPECIFICATIONS

• Dimensions: 30210180mm
• Weight: 260g
• USB-C: connection
• Qi: charging
• Input power: 5V / 1A
• Output power: 5W + 10W

SAFETY AND MAINTENANCE INSTRUCTIONS

1. Please read this operation manual carefully before use.
2. The safety and maintenance instructions in this operation manual should be retained for future reference and must be followed at all times.
3. Keep the product away from heat sources such as radiators, heaters or other appliances that produce heat.
4. Place the speakers in a stable position to avoid fall and cause damage or personal injury.
5. Do not expose the product to direct sunlight for longer periods. High temperatures may shorten the life of the product, destroy the battery and distort certain plastic parts.
6. Do not expose the product to extreme cold as it may damage the internal circuit board.
7. Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles varies by use and settings.
8. Avoid liquids getting into the product.
9. Before wiping with a dry cloth to clean the speakers, set the power switch to the off position and unplug the power cord from the power outlet.
10. Do not throw with or stamp on the product. This may damage the internal circuit board.
11. Do not try to disassemble the product. This must only be done by a professional.
12. Do not use concentrated chemical products or detergent to clean the product.
13. Keep the surface away from sharp things, as these may cause damage to the plastic parts.
14. Use 5V / 1A power supplies only. The connection of power supplies with higher voltage may lead to severe damage.
15. Do not arbitrarily discard or place the lithium battery near fire or intense heat in order to avoid a risk of explosion.

If you do experience any problems with your product please contact the retailer you purchased the product from. The retailer will provide you with guidance and if that does not solve the problem, the retailer will handle the claim directly with KREAFUNK.

PRECAUTIONS AND TAKING CARE OF wiTRAY

1. This product should be used and stored at a temperature between -20° to 40°, and humidity should be less than 85%.
2. Be sure not to place the product in high temperature environment during charging to avoid overheating and damage.
3. Keep this product in a dry place. Never place or use this product in wet or dirty conditions.
4. Never throw this product into a fire.
5. Never throw or drop this product as it may cause damage and malfunction.
6. Do not place anything between the mobile device being charged and the charging pad.
7. Never attempt to alter or disassemble this product. If there is a problem with the product, please contact your seller for further assistance.
8. This product is not suitable for use as a travel adapter.
9. Keep away from high voltage devices (highest 5V).
10. Do not place the product too close to magnetic stripe cards or chip card (credit card, ID card, etc.) to avoid magnetic failure.
11. Please keep the distance at least 20 cm between the product and implantable medical devices (pacemakers, implantable cochlear, etc.) to avoid potential interference with the medical device.
12. If you need to clean the charger, please make sure it is not connected to the AC adaptor.
13. Don’t place heavy objects on the product. This may damage the internal circuit board.
14. This product is not a toy. Please keep away from children.
15. Respective countries have their own laws on the minimum age allowed to operate chargers. Please check with your respective authority for further information.
16. All products have gone through a thorough quality assurance inspection. If you find that your device is excessively hot, is emitting odor, is deformed, abraded, cut or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Manufacturer.

This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at: https://kreafunk.com/pages/declaration-of-conformity

KREAFUNK ApS Klamsagervej 35A, st. 8230 Aabyhoej
Denmark
www.kreafunk.dk
info@kreafunk.dk
+45 96 99 00 20

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>