Taylor Pneumatic T-7356V Needle Scaler Instruction Manual
- June 10, 2024
- Taylor Pneumatic
Table of Contents
T-7356V
NEEDLE SCALER
VACUUM READY
T-7356V Needle Scaler
OILING INSTRUCTIONS:
OIL AFTER EACH USE WITH A FEW DROPS OF AIRTOOL OIL THROUGH THE AIR INLET. RUN
FOR 1 SECOND TO COAT ALL INTERNAL PARTS.
RECOMMENDED:
MINI TUNE UP KIT PARTS 2,3,4,5,6,38,39,46,47,48
MAXI KIT ADD TO THE ABOVE- 7,9,28(2PCS),29, 30(2PCS),31,32,33,45
*USING PRESSURE GREATER THAN 90 PSI MAY CAUSE HEAVY WEAR AND WILL VOID THE WARRANTY
USE 90 PSI MAXIMUM
REF # | PART # | DESCRIPTION | QTY |
---|---|---|---|
1 | 735601 | BACKHEAD | 1 |
2 | 735602 | O-RING | 1 |
3 | 735603 | THROTTLE VALVE | 1 |
4 | 735604 | SPRING | 1 |
5 | 735605 | GASKET | 1 |
6 | 735606 | VALVE CAP | 1 |
7 | 735607 | LEVER | 1 |
8 | 735608 | PIN | 1 |
9 | 735609 | HOSE ADAPTER | 1 |
10 | 735610 | LOCKING RING | 1 |
28 | 735628 | ALIGNMENT SHIM | 2 |
29 | 735629 | REAR VALVE BLOCK | 1 |
30 | 735630 | PIN | 2 |
31 | 735631 | VALVE | 1 |
32 | 735632 | FRONT VALVE BLOCK | 1 |
33 | 735633 | PISTON | 1 |
35 | 735635 | BARREL SLEEVE | 1 |
36 | 735636 | NOSE | 1 |
37 | 735637 | KEY | 1 |
38 | 735638 | DRIVER RETAINER | 1 |
39 | 735639 | Retainer Buffer | 1 |
40 | 735640 | Barrel | 1 |
41 | 735641 | Clip | 1 |
45 | 735645 | Driver | 1 |
46 | T-735646 | Needle Set (19) | 1set |
47 | 735647 | Needle Holder | 1 |
48 | 735648 | Spring | 1 |
49A | 7356V49A | Needle Tube ( W/ Knurl ) | 1 |
50 | 7356V50 | Allen Wrench | 1 |
51 | 7356V51 | Brush | 1 |
52 | 7356V52 | Screw | 1 |
53 | 7356V53 | Shroud | 1 |
54 | 7356V54 | Nut | 1 |
OPTIONAL ACCESSORIES
T-7356SK | MINI TUNE UP KIT |
---|---|
T-7356LK | MAXI TUNE UP KIT |
505 N. Railroad Ave. 33435
P.O. Box 1117 33425
Boynton Beach, FL
SEE MORE OF OUR CATALOG AT
www.taylorpneumatic.com
JAN. 2023 / ALL RIGHTS RESERVED / COPYRIGHT 2023
Ph. (561)732-1111
Fax. (561)731-4412
Toll Free 800-805-8665
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>