owon SPF 2200-WB-TY Smart Pet Feeder User Guide

owon SPF 2200-WB-TY Smart Pet Feeder

Preface

Quick start by the following steps:

• Please scan the QR code on the packaging box or search ‘Smartlife’ from APP store to download the APP.
• Make sure the device’s Wi-Fi indicator is rapidly blinking. If not, please reset it.
• Keep close to the feeder, then open your bluetooth and App. The device will be automatically detected and showed in the App.
• Select ‘Go to add’ to add automatically the Pet Feeder in “Small Home Appliances” list.

For more details about network pairing, please refer to chapter 4.

Safety Notice

WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the Smart Pet Feeder and other property. Read all the safety notices below before using the Smart Pet Feeder.

• Avoid high humidity or extreme temperatures.
• Avoid long exposure to direct sunlight or strong ultraviolet light.
• Do not drop or expose the unit to intense vibration.
• Do not disassemble or try to repair the unit yourself.
• Do not expose the unit or its accessories to flammable liquids, gases or other explosives.

Technical Specifications

Welcome

The Smart Pet Feeder allows you to feed your pet remotely or apply schedules for automatic feeding. You can get the feeding information anywhere at any time. This guide will provide you with an overview of the product and help you get through the initial setup.

Features:

• Wi-Fi Remote control -Tuya APP smartphone programmable
• Dual feeding mode – Automatic & manual feeding
• Accurate feeding – Schedule up to feed 10 meals per day
• Recording and playback function – Recording will be played every time feeding
• Health Management- Record pet’s daily feed quantity to track of their health
• Dual power protective – Battery backup, continuously operate when power off or internet disconnected

In the box

• Pet Feeder x 1
• Power Adapter x 1
• Quick Guide x 1

NOTE：18650 battery box needs to be purchased separately.

Please check the condition and the accessories of pet feeder after you open the box.
APP Download:

1. Scan the QR Code on the packaging box with your smartphone.
2. Search ‘Smartlife’ APP from the App store.

Tips:

Dry and solid pet food only, recommed food diameter between 5 to 15 mm.

Get to know your device

Battery box
3 x D cell batteries ( or 1 x 18650 batteries ). Please pay attention to the polarity. Please note that the battery charging is for backup purpose only. If you wish to control the pet feeder remotely, power supply is needed.
Note: When the battery power is below 19%, the phone will receive a low battery alarm.
Power switch

• for ON, ○ for OFF.

Power jack
Use the supplied power adapter.
Loudspeaker
After the recording is completed, the recording will be played every time the food is fed. Also you can set the number of times each recording can be played through the APP.

Feeding Button:

• Short press to deliver a portion of food
• Long press to deliver food continuously

Indicator
The Wi-Fi status gives the following information:

• EZ pair mode (Default): Quick pair devices. If you want to add multiple devices at the same time, please choose this mode, and then add devices in batches on your phone.
• AP pair mode: If you would like to pair one specific device among many devices. Please refer to Part 4 to configure network in this mode.

Note: The priority of light display will as following: Green light ＞ Red light (Food stuck ＞ Food shortage) ＞ Blue light

Recording Button:

• Long press the recording button to record. When the device indicator is green, the device is recording.

Note: Press and hold the button for 2 seconds to enter recording mode (the green light will be always on), and the recording ends when the hand is released. The longest recording time is 10 seconds.
Audio playback:

• Short press the recording button to play the recording.

Wi-Fi Button:
Hold down the Wi-Fi button for the first time for 5 seconds until the blue indicator blinks which will restore the network configuration information and the device enters the EZ mode. Hold down the Wi-Fi button again for 5 seconds. The blue indicator blinks slowly, and the device switches to the AP mode.

Get started

To get started, you will need:

• Connect your phone to the 2.4Ghz Wi-Fi network.
• A mobile phone with a mobile APP installed.

Then follow the steps below:

1. Power on the Smart Pet Feeder.
2. Make sure the Wi-Fi indicator is rapidly blinking. If not, please reset it.

Add devices

1. Open your App.
2. Login with an existing account. If you are a new user, you need to create an account at first.
3. Turn on “Bluetooth” and “Location” on your phone before connecting the Wi-Fi.
4. Once login, the phone will automatically detect the device via Bluetooth. And choose “Go to add”.
5. Enter your home Wi-Fi account and password (Only support 2.4Ghz Wi-Fi), then tap “Next” button.

App Overview

Home:

1. Home management
   Add or delete home and manage home names, rooms, locations, and members.

2. Location information
   Information about your local weather, conditions, outdoor temperature,PM.

3. Device list
   You can check the added device, tap one to enter control boar.

4. Add devices
   You can add other other devices directly from it.

5. Management
   You can change device’s display mode, manage device, create rooms and assign devices to each room.

6. Voice control (Available with Google Voice)

Smart: Create smart scene and add automatic function

Me: App settings and FAQ about the app

Control board

Select the target Pet Feeder in device list then enter the control board

• Meal plan
  Tap to edit the schedule for the automatic feed. Schedule supports up to 10 items and per schedule supports up to 12 portions. The error of the schedule is about 30 seconds.

• Feed record
  Tap to check the feeding history.

• Manual feeding & Feeding portion setting
  Tap “-” to reduce feeding portion and tap “+” to add feeding portion when manual feeding. The maximum number of portion is 12 at a time.

• Feeder status display
  It will have three different status: Standby, Feeding and Done.

• More settings
  Tap for more settings, like rename device, device information, third- when manual feeding. The maximum number of portion is 12 at a time.

• Feeder status display
  It will have three different status: Standby, Feeding and Done.

• More settings
  Tap for more settings, like rename device, device information, third- party control and others.

• Device setting
  Tap to set the number of voice playbacks, indicator lights, clear recordings, restore factory settings, etc.

Food stuck alarm:
When the food is stuck, the APP will recevie the alarm. And the red light will flash slowly.

Food shortage alarm:
When it is short of pet food, the APP will recevie the alarm. And the red light will flash rapidly.

Feeding plan display:
The next feeding time and the number of portions will be shown.

Other Device Adding Methods
Configure the network in EZ mode.
Note: In this case, if you only need to configure one device, no need to turn on your phone’s bluetooth.

• Please click the ‘+’ button at the top right corner of the App to add devices.
• Select ‘Pet Feeder’ to add manually the Pet Feeder in “Small Home Appliances” list.
• Enter your home Wi-Fi account and password (Only support 2.4Ghz Wi-Fi), then tap “Next” button.
• Place the router, mobile phone, and Pet Feeder as close as possible. Confirm the indicator on your device is rapidly blink, then tap “Next” to wait for connection.

Configure the network in AP mode.
Note: In this case, no need to turn on your phone’s Bluetooth.

• Reset the device in EZ pair mode, it will switch to AP pair mode. The indicator on your device will blink slowly.
• Then switch the network configuration mode to AP mode at the upper right corner of the APP when you add the device.
• Place the router, mobile phone and Pet Feeder as close as possible. Confirm the indicator on your device is slowly blink, then tap “Next” to wait for connection.
• After the device has been added, you can tap device.

FAQ

How to install the 18650 battery:
Note: Both the battery and the battery box of 18650 need to be purchased separately

1. Get a battery box with 18650 battery, like figure 1.
2. Place the feeder horizontally in front of the body, then put the battery box into the battery slot according to the direction shown in the figure 2, and then push it forward to fix it.

How to remove and install the barrel:

How to remove the barrel:

1. Please fix the white main body first, and then hold the black barrel with both hands and lift it up, then the barrel can be disassembled
2. Please wipe it clean with a clean damp cloth.

How to install the barrel：

Please return the paddle in the barrel (as shown in the figure below), and then place the barrel on the main body according to the direction when it was removed and press it down gently to fix the barrel.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>