Solis SOL-DLS-LAN Data Logger LAN Stick User Manual
- June 10, 2024
- solis
Table of Contents
SOL-DLS-LAN Data Logger LAN Stick
User Manual 
Data Logger LAN Stick
Quick User Guide
DLS Version: 1.3
Delivery Content
- 1 pc LAN Stick
- 1 pc Data Logger LAN Stick Quick User Guide
Introduction
Data Logger LAN Stick is mainly used in inverters to realize simple and quick
access to Internet. Users can easily check device information by logging in
the monitoring center. The communication topology is as shown below:
Description of Symbols
To ensure normal use of the datalogger, before using the datalogger, be sure
that:
a. The connected wireless router can normally access to Internet;
b. The communication address of the inverter MUST BE ” 01″, which is default
value.
c. A computer is connected to this device for parameter setting.
Electrical Connection
Connect LAN Stick to the corresponding interface on the inverter. Solis-1P5K-
4G is used as an example in this manual. Please perform relevant operations as
indicated below:
Data Logger LAN Stick Installation
- Insert LAN Stick to COM port.
- Fasten the LAN Stick.
NOTES
LAN Stick automatically obtains IP by default.
If the network cable supports automatically obtains IP, please jump to “ 3”
for APP registration.
If network cable do not support obtains IP automatically , please continue to
follow “ 2 ” for IP settings.
LAN configuration
Step 1: Enter 169.254.173.207 in the web browser, open the following
configuration interface. (If you can’t open it, please skip to3 ) Enter
username admin and password admin. 
Step 2: Select the “ Quick Set ”.
Enter IP address、Subnet mask、Gateway address、 DNS server address for network
cable. Then click the “ Save ” .(Please enter in the “ 1 Network name ”,
otherwise it cannot be saved)
Step 3: The following interface pops up to
indicate that the setting is successful, please skip to 4. Otherwise please
try LAN configuration again .
Step 1: With a network cable to connect the computer and LAN Stick, right-
click the computer icon in the lower right corner of the computer, enter the
network and sharing center.
Step 2: Select the local connection
options.
Step 3: Left double-click ” Properties ” into
the ” local connection status”.
Step 4: Left double-click: “Internet
Protocol version 4 (TCP / Ipv4) .
Step 5: While the computer’s IP is configured as a static IP (as
shown below) .
Step 6: Enter 10.10.100.254 in the web browser,
open the following configuration interface. Select the “ Network ”.
Step 7: Enter IP address、Subnet mask、Default gateway、Preferred
DNS server and Optional DNS server for network cable. Then click the “ Save ”
and “ Restart ” to restart the LAN Stick. 
Create Solis monitoring account
Step 1: Mobile phone scan the QR code to download the APP, or in the APP Store or Google Play search Solis Home or Solis Pro.
|
---|---
http://www.ginlongmonitoring.com/GinLongHomeDownload/|
http://www.ginlongmonitoring.com/GinLongProDownload/
Step 2: Click on the “Register ”.
Step 3: Fill in the form as required and
click the“ Register ”.
Create plant
Step 1：In the APP homepage and click “Build Your Plant Within 1 Minute!” in
the middle of the screen. Or click the “+ ” in the upper right corner.
Step 2: Enter the SN of the datalogger.
The datalogger SN can be automatically scanned by placing the purchased device
bar code in the scan box. If you can’t scan, you can also manually enter the
datalogger SN (just enter the digital serial number).
Note: Please scan the
SN number on the datalogger, not the SN number on the inverter. Step 3 :Enter
the plant information.Then click the ” Next “.
Step 4 : Enter the plant name
and contact information of the plant owner . Then click the “ Done”.
Distrubutor/Installer create plant
In order to easy registration and easy manage, you can also let the
distributor/installer register the plant, then Link it to you .
Click the [ ] and tell the “ ” to your ID Distrubutor/installer to build the
plant for you.
(Note: your Distrubutor/installer must have a Solis Pro account)
Link distributor/installer
Step 1: In order to easy manage to your plant.
Select the plant and enter Intro . Click the ” installer ” or ” distributor ”
.
Step 2: Enter the company name of the installer or distributor.
Then click the “ Search ”.
Step 3: Click the [Bind Distributor/Installer
] and the plant will appear in your installer/distributor monitoring
interface.
(Note: your installer/distributor must have a Solis Pro account to appear in
the search list)
Contact
If you have any technical questions about our products, please contact
us.Before contacting us, please confirm the following items:
Equipment model
Serial number of the datalogger
Problem description
Screenshot of the Status page in the configuration interface
Ginlong Technologies Co., Ltd.
No. 57 Jintong Road, Binhai Industrial Park,
Xiangshan, Ningbo, Zhejiang, 315712, P.R.China.
Tel: +86 (0)574 6578 1806
Fax: +86 (0)574 6578 1606
Email：info@ginlong.com
Web：www.ginlong.com