The Home Depot DA4027449 Mixed Material Bed Instructions
- June 10, 2024
- THE HOME DEPOT
Table of Contents
DA4027449 Mixed Material Bed
Instructions 
(Black &Gray)
Mixed Material Bed
King
Weight Limit: 500 Lb / 227 Kg
DA4027449 Mixed Material Bed
**** THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Limited 1 year Warranty
We warrants this product to be free from defects in material and workmanship
and agrees to remedy any such defect. This warranty covers one year from the
date of original purchase from authorized retailers. This is solely limited to
the repair or replacement of defective parts and assembly labor is not
included. This warranty does not apply to any product which has been
improperly assembled, subjected to misuse or abuse or which has been altered
or repaired in any way.The warranty does not cover wearing, tearing, fading or
splitting of the fabric (where applicable). Liability for consequential
damages is excluded to the extent exclusion is permitted by law. This warranty
gives you specific legal rights and you may also have other rights which vary
from state to state or province to province.
To obtain warranty service, purchaser must present original bill of sale.
Components repaired or replaced are warranted through the remainder of the
original warranty period only. The defective components will be repaired or
replaced without charge, subject to the terms and conditions described above.
Read Before Beginning Assembly
- Work in a spacious area and near where the unit will be used, preferably on a carpet, or use a piece of the cardboard packaging to protect your floor and product.
- Make sure all parts are included. Most parts are labeled or stamped on the raw edge.
- Read each step carefully. It is very important that each step of the instructions is performed in the correct order. If these steps are not followed in sequence, assembly difficulties will occur.
- This product may contain small components. Please ensure that they are kept away from small children.
- This product is designed for home use and is not intended for commercial use.
PARTS LIST
IMPORTANT:
- Each part has unique part number. Please reference the appropriate part number when contacting customer service for replacement parts.
- Before throwing any packaging, please verify all contents and make sure you have received all the parts listed above!
PARTS LIST
PART NUMBERS
| PART LABELS | (Black &Gray) |
|---|---|
| F1 | T992290 |
| A1 | T992300 |
| P1 | T951400 |
| L1 | T957390 |
| L2 | T957400 |
| Y | T392590 |
IMPORTANT:
- Each part has unique part number. Please reference the appropriate part number when contacting customer service for replacement parts.
- Before throwing any packaging, please verify all contents and make sure you have received all the parts listed above!
HARDWARE LIST
Hardware Pack
Black&Gray)
Please do not completely tighten all the hardware, until the entire
assembly is complete, unless otherwise indicated in the step-by-step
instructions.
The screw(s), bolt(s) to be used at each step are shown in actual size
in the lower right corner of the page.
Step1
Attach T to C and D with 3.
Step2
2.1 Attach H X 2 to J X 2 with 4, 8, 9.
2.2 Attach G to J X 2 with 4, 8, 9.
Step3
Attach I to H X 2 with 2 and 5.
Step4
This bed offers you 2 options for the height of the bed foundation.
To assembly in Highest Position:
From STEP 4 to STEP 12.
To assembly in Lower Position:
From STEP 13 to STEP 21.
4.1 Attach L1 X 3 to I with 4, 8, 9.
4.2 Attach L1 X 2 to G with 4, 8, 9.
Then turn over the assembly.
Step5
Attach G to I with 5.
Step 6
6.1 Attach J X 2 to A X 2, C and D with 3, 6, 7.
6.2 Screw into A X 2, C and D.  Step 7
This bed offers you two options of headboard position:
To assemble in the lowest position:
From STEP 7 to STEP 9.
To assemble in the highest position:
From STEP 10 to STEP 12.
Attach F1 to A X 2 with 1.
Step8
Attach A1 to F1.
Step 9
9.1 Insert P1 into J X 2 as illustrated.
9.2 Lock P1 into place with Y.
Step10
To assemble in highest position:
From STEP 10 to STEP 12.
Attach F1 to A X 2 with.
Step11
Attach A1 to F1.
Step12
12.1 Insert P1 into J X 2 as illustrated.
12.2 Lock P1 into place with Y.
Step13
To assemble in Lower Position:
From STEP 13 to STEP 15.
13.1 Attach L2 X 3 to I with 4, 8, 9.
13.2 Attach L2 X 2 to G with 4, 8, 9.
Then turn over the assembly.
Step14
Attach G to I with 4. Step15
15.1 Attach J X 2 to A X 2, C and D with 3, 6, 7.
15.2 Screw 3 into A X 2, C and D.
Step16
This bed offers you two headboard positions options:
To assemble in the lowest position:
From STEP 16 to STEP 18.
To assemble in the highest position:
From STEP 19 to STEP 21.
Attach F1 to A X 2 with 1.
Step17
Attach A1 to F1.
Step 18
18.1 Insert P1 into J X 2 as illustrated.
18.2 Lock P1 into place with Y.
Step 19
To assemble in the highest positionFrom STEP 19 to STEP 21.
Attach F1 to A X 2 with 1.
Step 20
Attach A1 to F1.
Step 21
21.1 Insert P1 into J X 2 as illustrated.
21.2 Lock P1 into place with **Y. CAUTION: This unit is intended for
use only with the products and/or maximumweights indicated. Use with other
products and/or products heavier than the maximum weights indicated may result
in instability or cause possible injury.
Weight Limit:
** Upper Bed: 500 Lb / 227 Kg
Helpful Hints
- Move your new furniture carefully, with two people lifting and carrying the unit to its new location.
- Your furniture can be disassembled and reassembled to move.
- Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement.
- Check bolts and nuts periodically and tighten if necessary.
WARNINGS:
- For safety reasons and to prevent injuries:
- This bed is not intended for use by children under 4 years old.
- Prohibit jumping and horseplay on this bed.
- Only use a mattress which is 79″ – 80″ long and 75″ – 76″ wide on daybed.
- Do not use risers under this bed.
That’s it ! You’ve finished assembling your Mixed Material Bed!
Documents / Resources
| The
Home Depot DA4027449 Mixed Material
Bed
[pdf] Instructions
DA4027449 Mixed Material Bed, DA4027449, Mixed Material Bed, Material Bed
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>