SONOFF B02 WiFi Smart LED Bulb User Guide
- June 4, 2024
- SonOFF
Table of Contents
SONOFF B02 WiFi Smart LED Bulb
Install the device
To avoid electric shock, please turn off the power before installing the device.
Download APP
Power on
-
After powering on, the device will enter the Bluetooth Pairing mode during the first use. The device enters the”breathing mode,
-
The device will exit the Bluetooth Pairing mod e If not paired within 3mlns. If you want to enter this mod e, please press the manual switch three times repeatedly at an interval of every ls (Off-ON-Off-ON-Off-ON). The “breathing mod en indicates the light enters Bluetooth pairing mode.
Add the device
Tap”+” and select “Bluetooth Pairing”, then operate following the prompt on the APP.
FCC Warning
- Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment.
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body. This transmitter must
not be co-located or operating In conjunction with any other antenna or
transmitter.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, If not Installed and used In accordance with the
Instructions, may cause harmful Interference to radio communications. However,
there Is no guarantee that Interference will not occur In a particular
Installation. If this equipment does cause harmful Interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user Is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
INTENDED USE
- THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS or NOT FOR EMERGENCY LIGHTING.
- Only use the control provided with or specified by these Instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control. technician for help.
Lamp not suitable for use under dust an d moisture
- eWelink has integrated with mainstream Al platforms. To ensure users can know quickly which platforms/smart speakers are compatible with products, manufacturers can print the poster version with works with AIM of eWelink logo and attach It in the package with the user manual.
Smart products supporting eWelink APP nee d get the certification of the
corresponding platform before using the logo of Al voice platforms. Please
refer to the product certification to make a deletion If manufacturers use the
version on the package.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>