KisanKraft KK-WPE550F Centrifugal Water Pump for Agriculture User Manual

: June 10, 2024
: KisanKraft

KisanKraft KK-WPE550F Centrifugal Water Pump for Agriculture

KisanKraft-KK-WPE550F-Centrifugal-Water-Pump-for-Agriculture-
product

Product Information

The KisanKraft Centrifugal Water Pump is designed for agricultural use. It is available in four different models: KK-WPE-550F, KK-WPE-750F, KK-WPE-1100F, and KK-WPE-1500F. The pump is manufactured by KisanKraft Limited and comes with a 6-month warranty period from the date of sale or delivery, whichever is earlier.

Product Features

Centrifugal pump for efficient water transfer
Durable construction suitable for agricultural use
Available in four different models with varying power and capacity
Comes with a 6-month warranty period

Usage Instructions

Read the user manual carefully before installing and using the pump.
Contact an authorized dealer for purchase and installation of the pump.
Ensure that the pump is installed in a well-ventilated and dry location.
Connect the input and output pipes to the pump as per the user manual instructions.
Ensure that the power supply is compatible with the pump’s power requirements.
Switch on the power supply and operate the pump as per the user manual instructions.
Maintain the pump regularly as per the user manual instructions to ensure efficient and long-lasting operation.

Warranty Information

The KisanKraft Centrifugal Water Pump comes with a 6-month warranty period from the date of sale or delivery, whichever is earlier. The warranty is extended to the first end-user (original purchaser) and cannot be assigned or transferred if the product is resold by the first buyer. Any warranty claims should be raised by the dealer to KisanKraft Limited as per the warranty policy.

Important Notes

Ensure that you are satisfied with the product before purchasing, as there will be no on-site demonstration after purchase.
Any product once used cannot be taken back by KisanKraft Limited.
Warranty and after-sale services should be done through the authorized dealer selling the product.
This warranty is null and void if you fail to register the warranty with KisanKraft by sending the KisanKraft copy with dealer’s stamp.
All disputes are subject to the jurisdiction of Bangalore court.

Contact Information

Website: www.kisankraft.com
Email: [email protected]
Phone: +91.80.6835 7800

Warehouse: 818 3B1 to 818 3B18, Podalakur – Sangam Road, Prabagiripatnam,
Podalakur, Nellore – 524345, Andhra Pradesh, INDIA
Head Office: Sri Huchhanna Tower, #4,1st Main,7-A Cross, Maruthi Layout, Dasarahalli,
HAF Post, Hebbal, Bangalore 560024, Karnataka, INDIA

♦ Bangalore (HO) ♦ Ahmedabad ♦ Bhopal ♦ Bhubaneswar ♦ Coimbatore
♦ Guwahati ♦ Hubli ♦ Hyderabad ♦ Jaipur ♦ Karnal
♦ Kolkata ♦ Lucknow ♦ Nellore ♦ Pune ♦ Raipur Disclaimer: Pictures used in this manual are only for illustration purpose.

Product| Centrifugal Water Pump for Agriculture| KisanKraft Invoice Date|
---|---|---|---
Brand| KisanKraft| KisanKraft Invoice No.|
Model| p KK-WPE-550F p KK-WPE-750F

p KK-WPE-1100F p KK-WPE-1500F

W ARRANTY P ERIOD|

6 MONTHS

| FOR THE SPECIFIED PERIOD FROM THE DATE

OF SALE OR DELIVERY WHICHEVER IS EARLIER.

Warranty Policy

What is covered: KisanKraft Limited and its manufacturers warrant this product to be free from defects in material or workmanship. All parts defective in material and workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Limited or its manufacturers of such parts as appear to KisanKraft or its manufacturers, upon inspection, to be defective in material and/or workmanship. KisanKraft or its manufacturers make no warranty with respect to items not manufactured or sold by them. No onsite warranty is provided by KisanKraft Limited or its manufacturers. Defective items must be brought/sent to our Authorized Dealer or KisanKraft Limited’s office for service.
What is not covered: The warranty shall become null and void and neither KisanKraft Limited nor any of its manufacturers, nor its authorized dealers assume any responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage, (6) Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper set up, adjustments, tampering or altered products (8) Any modification to the product what-so-ever.
Important: (1) Normal maintenance and adjustments to the product is the responsibility of the customer. (2) Normal wear and tear are not covered under warranty. (3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell, sparkplugs, nylon line, air-filters, fuel-filters, oil seals and gaskets etc. are not covered under the warranty. (4) Electrical Motor, Electrical Parts, Battery Etc. are not covered under the warranty.
Incidental / Consequential Loss: KisanKraft Limited or its manufacturers will not be liable for general damages, including bodily injuries, or for incidental or consequential damages including, but not limited to, loss of use, loss of profits, loss of production, expense of substitute equipment or other commercial loss or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties, obligations, or liabilities. Any implied warranties, obligations, or liabilities, including, but not limited to, any implied warranty of merchantability shall be limited in duration to the applicable warranty period. Any action for breach of any warranties hereunder, including, but not limited to, any implied warranty of merchantability must be brought within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of KisanKraft Limited or any of its manufacturers has the authority to increase or alter the obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not transfer if the product is resold by the first buyer. The above warranties are extended to the first end user (original purchaser), and no warranty is made, nor authorized to be made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of any obligation under this warranty for failure during the applicable warranty period, you must deliver the defective product, to the nearest Authorized Dealer, along with proof-of-purchase (invoice/receipt). KisanKraft Limited, its manufacturers and its dealers reserve the right to inspect the claimed defective part(s) to determine if the malfunction is the result of a defect covered by this warranty. Please note that the decision of KisanKraft Limited with respect to any warranty claim is final.
After-sales Service (Including Warranty): KisanKraft Limited does not sell directly to consumers. All sales or supplies are made through Authorized Dealers. It is the responsibility of the Authorized Dealer to provide all after-sales service to consumers. Any warranty claim should be raised by dealer to KisanKraft Limited as per warranty policy.
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.
Notes:

This purchase is not contingent upon a product demonstration. The purchaser shall satisfy himself with the product, including any product demonstration or verification of any function, before buying. KisanKraft Limited or its authorized dealers, including online sellers, shall not be liable to give any on-site demonstration after purchase of any of the product.
Any product once used will not be taken back by KisanKraft Limited.
Warranty and After Sale Services (including but not limited to installation, Demonstration, Repair, Routine Maintenance etc.), should be done through the Authorized Dealer selling this product.
Dealers should have their own technician to provide After Sales Services to their Customers. KisanKraft Limited provides free training to Authorized Dealer’s technicians at KisanKraft Limited’s head office, on request from Authorized Dealer.

Before Getting Started

Thank you for your purchase and use of our products. In order to avoid accidents or injury, please read this manual carefully before using the machine. After reading, preserve it for further reference. Our company will not be responsible for any personal injury or mechanical failure caused by improper operation of the water pump. This manual describes the basic operation and maintenance instructions of new water pump. The data given in this manual is subject to change without prior notice.
APPLICATION This pump is used primarily as cellar pump. When installed in a shaft, the pump provides protection from flooding. It is also used wherever water has to be moved from one place to another, e.g., in the home, agriculture, horticulture, plumbing and many other applications.
Suitable for use with dirty water that is not chemically aggressive towards the materials from which the pump is made.
As a result of their reliability and the fat that they are easy to use, and suitable for use in applications such as clearing dirty water, discharging domestic wastewater, and for emptying collection traps containing particle

WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions.

GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

Caution
The appliance is not suitable for continuous pump operation (e.g., continuous circulation in a pond) or as a stationary installation (such as a lifting device, fountain pump). Caustic, slightly inflammable and other explosive substances such as petrol, petroleum, diluted nitrogen, greases, oils, salt water and wastewater from toilets as well as sludgy water that has a slower flow capacity than water, should not be transported using the pump. The temperature of the transported fluids should not exceed 35°C.

Safety Instructions

Danger of death
Violating these safety instructions may result in death through electrocution

Check the power cord with mains plug for damage before every use. If the power cord is damaged, please arrange immediately for the exchange by an authorized customer service or a skilled electrician.
All electrical sockets should be fixed in an area that is protected against floods.
Unsuitable extension cables can be hazardous. Only use extension cables outdoors which have been approved for this purpose and labelled with a sufficient cable cross-section. The plug and coupling of the extension cable used must be spray watertight.
Do not use the mains cable or the cable of the level sensor to transport or fasten the appliance.
To separate the machine from the mains, pull the plug and not the power cord.
Do not scrape the power cord across sharp edges and ensure that it does not get pressed.
The voltage indicated on the type of plate must correspond to the voltage of the electrical source.
To avoid risks, all repairs and replacement of spare parts may only be carried out by the authorized customer service personnel.
Follow the rules for electrical safety of equipment: When pumping out swimming pools, garden ponds and fountains, only using an earth-leakage circuit breaker with a nominal leakage current of max. 30 mA with the immersion pump. Do not operate the pump if there are persons located in the swimming pool or the garden pond.
For safety reasons, we recommend that you operate the appliance only via an earth-leakage circuit breaker (max. 30 mA).
The electrical connection of the system may only be performed by a qualified electrician. Please follow the respective national regulations!
This device is not intended for use by persons (including children) with reduced physical, sensory, or mental abilities or lacking experience and/or knowledge, unless they are supervised by a person responsible for their safety or are instructed by these persons on the use of the device. Children should be supervised, to ensure that they do not play with the device
The submersible motor-driven pump must be protected from frost.
The pump must be protected from running dry.

START UP
Please follow the safety instructions before start-up!
Please keep in mind that the label “Nameplate” may not be removed from the pump. If the label is removed, there will be no more warranty for the tightness of the pump.

WARNING Packing materials are no toys! Children must not play with plastic bags! Danger of suffocation!

Symbols:

| Denotes risk of personal injury or damage to the tool.
---|---
**| Read manual before use.
| Delivery height max
| Size: Foreign bodies
| Delivery rate max.
| Immersion depth max.
| In accordance with essential applicable safety standards of European directives
IPX**| Degree of protection IP

ELECTRICAL SAFETY

Always check that the power supply corresponds to the voltage on the rating plate.

DESCRIPTION

Motor housing
Water inlet
Water outlet
Cable & plug
Floating switch
Carrying handle

Installation

Connecting the outlet pipe

Connect the outlet pipe to the outlet opening.

Please note! You should never install the pump by suspending it unsupported from its delivery pipe or power cable. The submersible motor pump must be suspended from the specially provided handle or be placed on the bottom of the shaft. To guarantee that the pump works properly, the bottom of the shaft must be kept free of sludge and dirt of all kinds.
If the level of water sinks too far, any sludge in the shaft will dry out quickly and stop the pump from starting up. Therefore, it is necessary to check the submersible motor pump regularly (by carrying out start-up tests). The floater is adjusted in a way that the pump can immediately be started
Note!
The pump shaft should have minimum dimensions of 40 x 40 x 50 cm, so that the floating switch can move freely.
Main’s supply
Your new submersible pump is equipped with a shock-proof plug according to regulations. The pump is designed to be connected to a safety socket of 220-240V~ 50Hz.
Important Note!
If the mains cable or plug suffers any damage from external action, repairs to the cable are prohibited.

Setting To Work

After having read these instructions carefully, you can set your pump to work, reconsidering the following:

Check if the pump rests on the ground of the shaft.
Check of pressure cord has been attached properly.
Make sure that the electrical connection is 220-240V~ 50 Hz.
Check if socket is in good condition.
Make sure that water and humidity can never come to the mains supply.
Avoid pump running dry

Before installing or moving the pump always remove the mains plug from the wall socket

Switching on and off

To switch on the pump, insert the mains plug in the wall socket.
To switch off the pump, remove the mains plug from the wall socket. The pump only operates when the float switch floats. This prevents the pump from running dry during operation

Cleaning And Maintenance

Attention! Before performing any work on the equipment, pull the power plug.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.

Service
The pump is maintenance free. Defects must only be repaired by an authorized service station.

Cleaning

When the pump is often transported in the course of operation, it should be cleaned out with clear water after every use.
In case of stationary installation, the function of the bating switch should be checked every 3 months.
All fibrous particles which may have built-up inside the pump housing should be removed with a water jet.
Every 3 months the shaft ground and as should be cleaned from mud.
Remove deposits on the floater with clear water.

The pump must not be opened by the user.

Technical Specifications

| Model| KK-WPE- 550F| KK-WPE- 750F| KK-WPE- 1100F| KK-WPE- 1500
---|---|---|---|---|---
Electric Motor| Power| 0.55 kW

0.75 hp

Max Flow Rate:

| ****

400 L/min

| ****

400 L/min

| ****

500 L/min

| ****

600 L/min

Note: Specifications are subject to change without prior notice.
ATTENTION! The sound power pressure may exceed 85 dB(A), in this case individual hearing protection must be worn.

Weighted root means square acceleration according to relevant standard.: < 2.5 m/s²

The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another that the declared vibration total value may also be used in a preliminary assessment of exposure.
A warning that the vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used and of the need to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).

Part Diagram

KisanKraft-KK-WPE550F-Centrifugal-Water-Pump-for-
Agriculture-fig 4

Part List

NO.	PARTS
1	Cable
2	Handle
3	Float switch
4	Tie-rod
5	Upper pump cover
6	Capacitor
7	Capacitor presser
8	Base
9	Motor housing
10	Thermal protector
11	Stator
12	Bearing
13	Rotor
14	Bearing
15	Hydro cylinder
16	Mechanical seal
17	Hydro cylinder cover
18	Oil seal
19	Impeller
20	Outlet joint
21	0 ring
22	Pump casing
NO.	Parts
1	Cable

KisanKraft has a large range of products to serve the farmers. A list of our products is given below:

Brush Cutters and Accessories

Brush Cutter/Power Weeder
Backpack Brush Cutter
Tea Pruner
Pole pruner with Engine
Reaper Attachment
Blades-Circular
Blades (2 &3 points)
Baffle
Nylon Rope
Tap & Go

Chainsaws

Petrol Chainsaw
Electric Chainsaw
Chain Sharpening Machine

Engines and Water Pumps

Engine –Diesel-(Horizontal)
Engine –Diesel (Vertical)
Engine-Kerosene
Water Pump with Petrol Engine
Water Pump with Kerosene Engine
Water Pump with Diesel Engine

Hand Tools

Secateurs
Folding Saw
Garden Rake
Garden Shovel
Hedge Shear
Lopper
Telescopic Hedge Shear
Telescopic Lopping Shear
Tree Pruner
Telescopic Steel Pipe & Fruit Picker
Bag
Sheep Shear

Garden Tools

Electric Pressure Washer
Hedge Trimmer
Lawn Mower (Electric, Petrol & Manual)
Leaf Blower

Cultivators and Accessories

Petrol and Diesel

Sprayers and Accessories

Battery Sprayer
Portable Power Sprayer
Trolley Sprayer
Manual Knapsack Sprayer
Manual Pressure Sprayer
Rose Cans
Hose Crimping Machine
HTP Sprayer
HTP Delivery Hose
HTP Hose Reel
HTP Stand
HTP Gun / Lance (Brass Rod
Knapsack Power Sprayer
Mister / Duster / Granule Spreader
HTP Sprayer Set with Diesel Engine
HTP Sprayer Set with Kerosene Engine
Fogging Machine

Milking Machine

Wood Shredder
Fodder Ensiling Chaff Cutter
Fodder Grinder Chaff Cutter
Fodder Mini Chaff Cutter

Harvester

Maize Sheller
Maize Sheller + DE husker
Maize Combine Harvester
Onion Digger Carlotta Italy
Tea Leaf Harvester
Sugarcane Combine Harvester
Sugarcane Leaf Stripper

Transplanter and Post Hole Digger

Paddy Transplanter (2 & 8 Rows)
Transplanter-Vegetable & Tobacco
Post Hole Digger (4” to 14” Augers)

Wide Range of Products for Every Need

For more information give MISSED CALL: 07676065555

Warranty Certificate

(KISANKRAFT COPY)

Product| Centrifugal Water Pump for Agriculture| KisanKraft Invoice Date|
---|---|---|---
Brand| KisanKraft| KisanKraft Invoice No.|
Model| p KK-WPE-550F p KK-WPE-750F

p KK-WPE-1100F p KK-WPE-1500F

W ARRANTY P ERIOD|

6 MONTHS

| FOR THE SPECIFIED PERIOD FROM THE DATE OF SALE OR DELIVERY WHICHEVER IS EARLIER.
Dealer’s Invoice Date| | Dealer’s Invoice No.|
Buyer’s Info (Name, Address, Phone, etc.):| Dealer’s Stamp (Address, Phone, TIN, etc.):
Buyer’s Sign| | Dealer’s Sign|

Warranty Policy

What is covered: KisanKraft Limited and its manufacturers warrant this product to be free from defects in material or workmanship. All parts defective in material and workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Limited or its manufacturers of such parts as appear to KisanKraft or its manufacturers, upon inspection, to be defective in material and/or workmanship. KisanKraft or its manufacturers make no warranty with respect to items not manufactured or sold by them. No onsite warranty is provided by KisanKraft Limited or its manufacturers. Defective items must be brought/sent to our Authorized Dealer or KisanKraft Limited’s office for service.
What is not covered: The warranty shall become null and void and neither KisanKraft Limited nor any of its manufacturers, nor its authorized dealers assume any responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage, (6) Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper set up, adjustments, tampering or altered products (8) Any modification to the product what-so-ever.
Important: (1) Normal maintenance and adjustments to the product is the responsibility of the customer. (2) Normal wear and tear are not covered under warranty. (3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell, sparkplugs, nylon line, air-filters, fuel-filters, oil seals and gaskets etc. are not covered under the warranty. (4) Electrical Motor, Electrical Parts, Battery Etc. are not covered under the warranty.
Incidental / Consequential Loss: KisanKraft Limited or its manufacturers will not be liable for general damages, including bodily injuries, or for incidental or consequential damages
This warranty is null & void, if you fail to register the warranty with KisanKraft by sending the KisanKraft Copy with dealer’s stamp. KisanKraft Limited including, but not limited to, loss of use, loss of profits, loss of production, expense of substitute equipment or other commercial loss or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties, obligations, or liabilities. Any implied warranties, obligations, or liabilities, including, but not limited to, any implied warranty of merchantability shall be limited in duration to the applicable warranty period. Any action for breach of any warranties hereunder, including, but not limited to, any implied warranty of merchantability must be brought within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of KisanKraft Limited or any of its manufacturers has the authority to increase or alter the obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not transfer if the product is resold by the first buyer. The above warranties are extended to the first end user (original purchaser), and no warranty is made, nor authorized to be made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of any obligation under this warranty for failure during the applicable warranty period, you must deliver the defective product, to the nearest Authorized Dealer, along with proof-of-purchase (invoice/receipt). KisanKraft Limited, its manufacturers and its dealers reserve the right to inspect the claimed defective part(s) to determine if the malfunction is the result of a defect covered by this warranty. Please note that the decision of KisanKraft Limited with respect to any warranty claim is final.
After-sales Service (Including Warranty): KisanKraft Limited does not sell directly to consumers. All sales or supplies are made through Authorized Dealers. It is the responsibility of the Authorized Dealer to provide all after-sales service to consumers. Any warranty claim should be raised by dealer to KisanKraft Limited as per warranty policy.
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.

Notes:

This purchase is not contingent upon a product demonstration. The purchaser shall satisfy himself with the product, including any product demonstration or verification of any function, before buying. KisanKraft Limited or its authorized dealers, including online sellers, shall not be liable to give any on-site demonstration after purchase of any of the product.
Any product once used will not be taken back by KisanKraft Limited.
Warranty and After Sale Services (including but not limited to installation, Demonstration, Repair, Routine Maintenance etc.), should be done through the Authorized Dealer selling this product.
Dealers should have their own technician to provide After Sales Services to their Customers. KisanKraft Limited provides free training to Authorized Dealer’s technicians at KisanKraft Limited’s head office, on request from Authorized Dealer.

(DEALER COPY)

including, but not limited to, loss of use, loss of profits, loss of production, expense of substitute equipment or other commercial loss or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties, obligations, or liabilities. Any implied warranties, obligations, or liabilities, including, but not limited to, any implied warranty of merchantability shall be limited in duration to the applicable warranty period. Any action for breach of any warranties hereunder, including, but not limited to, any implied warranty of merchantability must be brought within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of KisanKraft Limited or any of its manufacturers has the authority to increase or alter the obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not transfer if the product is resold by the first buyer. The above warranties are extended to the first end user (original purchaser), and no warranty is made, nor authorized to be made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of any obligation under this warranty for failure during the applicable warranty period, you must deliver the defective product, to the nearest Authorized Dealer, along with proof-of-purchase (invoice/receipt). KisanKraft Limited, its manufacturers and its dealers reserve the right to inspect the claimed defective part(s) to determine if the malfunction is the result of a defect covered by this warranty. Please note that the decision of KisanKraft Limited with respect to any warranty claim is final.
After-sales Service (Including Warranty): KisanKraft Limited does not sell directly to consumers. All sales or supplies are made through Authorized Dealers. It is the responsibility of the Authorized Dealer to provide all after-sales service to consumers. Any warranty claim should be raised by dealer to KisanKraft Limited as per warranty policy.
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.

Notes:

This purchase is not contingent upon a product demonstration. The purchaser shall satisfy himself with the product, including any product demonstration or verification of any function, before buying. KisanKraft Limited or its authorized dealers, including online sellers, shall not be liable to give any on-site demonstration after purchase of any of the product.
Any product once used will not be taken back by KisanKraft Limited.
Warranty and After Sale Services (including but not limited to installation, Demonstration, Repair, Routine Maintenance etc.), should be done through the Authorized Dealer selling this product.
Dealers should have their own technician to provide After Sales Services to their Customers. KisanKraft Limited provides free training to Authorized Dealer’s technicians at KisanKraft Limited’s head office, on request from Authorized Dealer.

www.kisankraft.com
[email protected]
+91.80. .6835 7800