KisanKraft KK-MCH-01D Maize Harvester User Manual

: June 10, 2024
: KisanKraft

KisanKraft KK-MCH-01D Maize Harvester

Product Information

The Maize Harvester KK-MCH-01D is a product manufactured by KisanKraft, a leading agricultural equipment company in India. The product comes with a warranty period of 6 months from the date of sale or delivery, whichever is earlier. The product is designed to efficiently harvest maize crops and comes with various features for ease of use.

Product Warranty Policy

The warranty policy for the Maize Harvester KK-MCH-01D states that KisanKraft or its manufacturers will not be liable for general damages including bodily injuries or incidental or consequential damages such as loss of profits or production expenses. The limited warranty is in lieu of all other express warranties, obligations, or liabilities. Any implied warranties, obligations, or liabilities will be limited to the applicable warranty period. The warranty cannot be assigned or transferred if the product is resold by the first buyer.

After-Sales Service
KisanKraft Limited does not sell directly to consumers; all sales or supplies are made through authorized dealers. The authorized dealer is responsible for providing all after-sales services to consumers. Any warranty claims should be raised by the dealer to KisanKraft Limited as per the warranty policy.

Jurisdiction
All disputes relating to the product are subject to Bangalore court’s jurisdiction.

Product Usage Instructions

Before using the Maize Harvester KK-MCH-01D, please read the user manual carefully and understand all safety instructions and warnings.

Assembly
Assemble all parts according to the user manual instructions. Check all bolts, nuts, and screws to ensure they are tightened. Ensure all safety guards are in place.

Starting the Engine
Fill the fuel tank with gasoline and oil mixture as instructed in the user manual. Turn on the fuel valve and choke. Pull the starter rope with a firm grip to start the engine.

Product Operating the Maize Harvester

Adjust the cutting height of the blades according to the height of the maize crop. Engage the blades and move the harvester through the maize field. Empty the maize into a storage container regularly. Be aware of obstacles and uneven terrain.

Product Cleaning and Maintenance

After use, turn off the engine and allow it to cool. Clean all parts of the harvester, especially the blades, to prevent rusting. Check all bolts, nuts, and screws to ensure they are tightened. Store the harvester in a dry, safe place.

KisanKraft Limited
Sri Huchhanna Tower, #4,1st Main,7-A Cross, Maruthi Layout, Dasarahalli, HAF Post, Hebbal, Bangalore 560024, Karnataka, INDIA

Bangalore (HO)
Ahmedabad
Bhopal
Bhubaneswar
Coimbatore
Jammu
Guwahati
Hubli
Hyderabad
Jaipur
Karnal
Kolkata
Lucknow
Pune
Raipur

Warranty Certificate

(CUSTOMER COPY)

Product

| Maize Harvester| KisanKraft Invoice Date|
---|---|---|---
Brand| KisanKraft| KisanKraft Invoice No.|
Model| KK-MCH- 01D
W ARRANTY P ERIOD|

6 MONTHS

| FOR THE SPECIFIED PERIOD FROM THE DATE OF SALE OR DELIVERY WHICHEVER IS

EARLIER.

Warranty Policy

What is covered: KisanKraft Limited and its manufacturers warrant this product to be free from defects in material or workmanship. All parts defective in material and workmanship are covered.
This warranty will only cover defects arising under normal usage.

This warranty is limited to repair or replacement by KisanKraft Limited or its manufacturers of such parts as appear to KisanKraft or its manufacturers, upon inspection, to be defective in material and/or workmanship. KisanKraft or its manufacturers make no warranty with respect to items not manufactured or sold by them. No onsite warranty is provided by KisanKraft Limited or its manufacturers. Defective items must be brought/sent to our Authorized Dealer or KisanKraft Limited’s office for service.

What is not covered:
The warranty shall become null and void and neither KisanKraft Limited nor any of its manufacturers, nor its authorized dealers assume any responsibility if the failure was caused by the following:

Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage, (6) Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper set up, adjustments, tampering or altered products (8) Any modification to the product what-so-ever.
Important: (1) Normal maintenance and adjustments to the product is the responsibility of the customer.
Normal wear and tear are not covered under warranty. (3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell, sparkplugs, nylon line, air-filters, fuel-filters, oil seals and gaskets etc. are not covered under the warranty. (4) Electrical Motor, Electrical Parts, Battery Etc. are not covered under the warranty.

Incidental / Consequential Loss:
KisanKraft Limited or its manufacturers will not be liable for general damages, including bodily injuries, or for incidental or consequential damages including, but not limited to, loss of use, loss of profits, loss of production, expense of substitute equipment or other commercial loss or damage.

Limitation of Liability:
This limited warranty is in lieu of all other express warranties, obligations, or liabilities. Any implied warranties, obligations or liabilities, including, but not limited to, any implied warranty of merchantability shall be limited in duration to the applicable warranty period. Any action for breach of any warranties hereunder, including, but not limited to, any implied warranty of merchantability must be brought within the applicable warranty period.

Modifications of Warranty:
No agent, representative, dealer, or employee of KisanKraft Limited or any of its manufacturers has the authority to increase or alter the obligations of this warranty.

Assignment / Transfer of warranty:
The warranty cannot be assigned and shall not transfer if the product is resold by the first buyer. The above warranties are extended to the first end user (original purchaser), and no warranty is made, nor authorized to be made assignable on resale by the first end user.

What you must do to obtain limited warranty service:
To obtain performance of any obligation under this warranty for failure during the applicable warranty period, you must deliver the defective product, to the nearest Authorized Dealer, along with proof of purchase (invoice/receipt). KisanKraft Limited, its manufacturers and its dealers reserve the right to inspect the claimed defective part(s) to determine if the malfunction is the result of a defect covered by this warranty. Please note that the decision of KisanKraft Limited with respect to any warranty claim is final.

After-sales Service (Including Warranty):
KisanKraft Limited does not sell directly to consumers. All sales or supplies are made through Authorized Dealers. It is the responsibility of the Authorized Dealer to provide all after-sales service to consumers. Any warranty claim should be raised by dealer to KisanKraft Limited as per warranty policy.

Jurisdiction:
All disputes are subject to Bangalore court’s jurisdiction.

Notes:

This purchase is not contingent upon a product demonstration. The purchaser shall satisfy himself with the product, including any product demonstration or verification of any function, before buying. KisanKraft Limited or its authorized dealers, including online sellers, shall not be liable to give any on-site demonstration after purchase of any of the product.
Any product once used will not be taken back by KisanKraft Limited.
Warranty and After-Sale Services (including but not limited to installation, Demonstration, Repair, Routine Maintenance etc.), should be done through the Authorized Dealer selling this product.
Dealers should have their own technicians to provide After Sales Services to their Customers. KisanKraft Limited provides free training to Authorized Dealer’s technicians at KisanKraft Limited’s head office, on request from Authorized Dealer.

Before Getting Started

Thank you for your purchase and use of our product In order to avoid accidents or injury, please read this manual carefully before using the machine. Also this manual provides information on installation, operation and maintenance. After reading, preserve it for further reference. This manual has contents related to the construction, operation, repair, maintenance, safety, and optimum performance of this maize harvester. Please be sure to read the manual carefully before operating, and confirm you have gained enough knowledge of safe operation and maintenance. Please note that as a part of continuous improvement, the product may undergo slight modifications

Safety Precautions

Warning:

Please be sure to read the manual carefully before operating, understand the safety operating methods, especially the handling methods during emergency. It is more important than the regular operation.
Do not operate the machine without enough training. Children/ minors are forbidden to operate.
Do not operate while after consuming alcohol, while having fatigue or in bad mood.
Do not operate the machine in insufficient light.
Before starting the engine, ensure it is in neutral gear and the clutch at the separating position.
Separate the clutch before changing the gear position. Lower the speed of engine.
Pay more attention while working on the slope field to avoid risk of falling down.
Bystanders should keep safety distance during operation
If you want to clear the mud or grass on machine or on the blades or any assistance is required, ensure to separate clutch and turn off engine first.
Fuel is highly flammable, so keep them away from fire. Turn off the engine, allow it to cool before adding fuel to oil tank.
Do not run the machine in less ventilated place occasion, in order to avoid CO poisoning.
Keep away from rotating and hot parts.

Working Principle & Application
The maize harvester has an engine with the power that drives walking tyres to walk through the gearbox, the power is also transmitted to another gearbox, which in turn drives two iron harvesting wheels and blades below. While the machine is moving forward, the stem of the corn plant is pulled inside by two rotating iron wheels, but the corn cob cannot pass because of its thickness, so it is cut down and made to fall into the case. Thus the stem is cut into pieces by blades. Suitable for the corn planted in the hilly land.

The machine can be divided into two parts, when the part with another gearbox is removed, the remaining part can be used as a tiller.

Features

Light and flexible: Occupies less space, is light in weight, do not require much professional knowledge and training，So can be easily operated.
Multifunction: corncob is collected separately and stem is cut into pieces and returned to the field.
Well-suited for hilly land where the road is not good enough, or the land is small.
Price, fuel consumption and operating cost is very low
Can be used as an independent tiller, like for rotary tillage, deep tillage, ridging, etc.
High efficiency.

Product Structure

Note: The above picture is only for reference

Switch off the button,
Accelerator
Walking clutch
Grip for height adjustment
Fuel tank
Oil level gauge of engine
Shift level for Fwd I, II, and Rwd
Tire
Walking gearbox
Joystick for hopper
Hopper
Oil filler of harvesting gearbox
Harvesting gearbox
Shift level for high and low speed
Silencer
Air filter
Grip for L&R adjustment
Armrest shelf
Oil filler of walking gearbox
Clutch for harvesting
Oil cup of air filter
Hand starter

Inspection & Adjustment

The machine has been adjusted and calibrated strictly before leaving the factory. However, it is necessary to check and adjust various parts before the first operation or at any time if necessary.

Daily inspection

Warning
Before operating, you must fill the machine oil into the engine oil cup of air filter, the gearbox of the walking case, the gearbox of the harvester. Please note that oil is not filled while leaving the factory. Following this, the operator should check the machine oil often. While working if machine oil is found insufficient or if it is not clean, then refill/ change it immediately, else the machine will be seriously damaged.

Inspect engine oil in engine, the regular volume is 0.7L.

Keep the machine on a flat surface.
Move the oil level gauge, clean it.
Put back it into hole again, do not turn.
Move it out again, check the oil level, the normal position is at the middle of mark. As shown in the right picture.

Inspect the engine oil in air filter, if there is no suitable volume of engine oil in the oil type air filter, it will damage the engine.

The regular level is near the mark of “oil level”.

Inspect the engine oil in the gearbox of walking case, the regular volume is 1.8L. The procedure is the same as mentioned above in 1.1: fill the engine oil in the engine.

Inspect the engine oil in the gearbox of harvesting, the regular volume is 2.2L.

You can remove the cover, turn tightly after filled.
Note: there is no gauge here, just fill the volume as required.
Inspect the control part such as control knobs, clutches, shift level, etc. Ensure they all are working reliably
Inspect screw bolts, and parts of the joint, and ensure they all are fastened tightly.

Operation

Starting the Engine
Before starting the engine, ensure to put the gearbox to neutral gear and the clutch at the separating position.

Refuel diesel into oil tank,
Right-turn the fuel switch to “open”
Left turn the choke valve to “start”
Turn the handle of accelerator to about 1/3
Press the switch off button to “ON”
By pulling out the recoil starter about 10cm, until it become tight, then pull quickly by force, then can you start the engine.

Warning:
If pull out the recoil directly by force without pulling out 10cm lightly, the starter will be damaged.

If you loosen the handle suddenly after pulling out, the handle will go back to starter quickly, the starter will be damaged. So you should grip the handle until it is completely back slowly.

After the engine is started, wait for few secondstill the engine runs smoothly, then turn the choke valve to “RUN”slowly.

Warning:
If the choke valve is not turned to “RUN” completely, the engine will be damaged in few minutes.

Walking and Working
After the engine is started, the machine can walk or work. Before this, adjust the angle and height of the handle as per your convenience. The following picture shows the controlling position.

Adjust the engine in low speed before joint the walking clutch, to avoid any injury caused by sudden and fast moving of the machine.

Note:
There is a button near walking clutch handle, you can press to stop walking at once while emergency statement. $KisanKraft-KK-MCH-01D-Maize-Harvester-fig- $9$$

There are 2 shift levels, the above used for control reward, forward I, forward II, the below one is used to control high and low speeds.

Note:
What calls for special attention is that, the shift level used for forward and backward, is under the statement of tiller. But for the corn harvester, it is opposite. That means, only by putting the shift level to backward, we can harvest maize.

The walking clutch should be separate before change shift level. $KisanKraft- KK-MCH-01D-Maize-Harvester-fig- $10$$

Warning:
Do not overexert while changing the shift level to avoid contact of your hand with hot silencer.

Maize harvesting
There is a special clutch for maize harvesting, called harvesting clutch, as shown in fig. Separate the clutch, to stop harvesting, but the machine can move forward or backward. Only when the clutch is pushed to joint, the harvesting will take place.

Warning:
To join or separate the harvesting clutch, you have to separate walking clutch first.

Discharge the corn cob.

If the hopper is full of corn cobs, you should discharge them, pull the handle to open as shown in the picture (right)
Warning: Before discharging, the walking clutch should be separated to stop walking of the machine.

Change direction
If you have finished a row, need to turn around or need to change direction because of other reasons, but if it is very difficult when all the 4 wheels are on surface, then you should lift the two wheels near to driver, above the ground, to change the direction easily.

Shut down

Separate the walking clutch
Turn the accelerator clockwise to the end, minimize the speed of engine
Press switch off button to “OFF”.

Warning:
Press switch-off button to “OFF “directly under the state of emergency. Otherwise, you should follow the above-mentioned procedure, i.e., not to shut down suddenly while working in high speeds in order to avoid any hurt or damage.

Maintenance & Service

Shut down the engine before any maintenance. In order to prevent the engine from being started accidentally, the engine accelerator should be put in the minimum position and for the electric start models， you should remove the start key.

The machine should be serviced by an authorized dealer unless the user has the proper tools, maintenance information and maintenance ability.
Use original parts or their equivalent products, as poor-quality substitutes can damage the machine.
Inspect the screw bolts, parts of joint, ensure they are fastened tightly
In order to maintain excellent performance, the machine must be inspected and adjusted regularly. Routine maintenance also guarantees the long service life.
Due to the running and friction and the instability of load, some problems are inevitable such as screw bolts loose, the parts wear and tear which may lead to machine abnormal function, reduction in engine power, increase in fuel consumption, etc.
To reduce the above problems and prolong machine service life, it is strictly necessary to, to do a good maintenance on a regular basis and keep it in good technical condition.

Technical Maintenance

Shift maintenance. (Before working and after working.

Inspect for oil leakage of the engine, gearboxes, etc.
Inspect if the volume of machine oil is sufficient.
Clean the mud, grass, oil contamination etc.
Listen and observe all over the machine for irregular sound, overheating, screw bolts loose.
Record the work.

Class I maintenance (every 150 hours)

Carry on all the works mentioned in 1.1
Clean the crankcase of the engine, and gearboxes and change the engine oil.
Inspect and adjust clutches, shift level system, and transmission system.

Class II maintenance (every 800 hours)

Carry on all the works mentioned in 1.2
Inspect all the gears and bearings, and replace the worn-out parts by new one.
Check all other items such as blades and screw bolts, and replace the damaged by new ones.

Technical Inspection (every 1500-2000 hour)

Separate the complete machine, clean and inspect, and replace the worn-out parts by the authorized person
Inspect and adjust the friction plate and clutch by an authorized person.

Long-Term Storage.
If the machine has to be stored for a long time, in order to keep it in good condition, the following measures should be taken.

Clean the surface of the machine neatly
Drain the engine oil from gear box then refill with new oil.
Coat anti-rust oil on the surface of the easy rust places.
Store the machine at a dry, well-ventilated, safe place.

Running-in

If you have just bought a new machine or the machine after a repair, then the machine should be running in.
The machine should work for half an hour without load, then work for 5 hours with light load.
Then drain the engine oil while it still warm, then refill new machine oil, running in for 4 hours, so you can operate the machine regularly.

Engine. Maintenance

The main contents of daily inspection and maintenance: screw bolts, oil leakage, and clean dirt, solve the troubleshooting.
Clean fuel filter every half a year or every 500 hours, take out and clean the fuel filter. Remove the leakage screw under the oil tank, and release all the fuel and impurities.
Clean the machine oil filter element, take out and clean the machine oil filter every 250 hours, and replace it after it is dry.
Replace engine oil: Replace with new engine oil after 20 hours for the first time, thereafter replace once in every 100 hours
Replace or clean air filter element.
If the filter element was blocked or damaged, the air going to engine will be reduced. The combustion of the engine will be bad. It will cause lack of power and the exhaust gas in black, and engine is difficult to start. So the filter element should be cleaned often.
The filter element of dry type air filter should be blown or brushed to remove the dirt, you should replace it with a new one if invalid.
Oil filter has sponge inside, you can remove the sponge, and wash it with detergent, then replace it back.

Maintenance of the Harvester Assembly.

Inspect the belts and clutch frequently, and solve in time if loose or other problems.
Inspect screw bolts, and ensure they are joined tightly.
Inspect the welding area, to find if there are somewhere broken, if found so, solve it without delay.
Clean the dust, and grass, to keep the belt running smoothly.

Troubleshooting

Problem	Reason	Solution	Remark

The engine does not start

| Lack of fuel in fuel tank| Refill fuel| ****

If there is less fuel in tank, the engine cannot start sometimes. Or even if started, it will stop automatically soon

Fuel switch off| Open switch
Insufficient Accelerator| Turn the accelerator to about 1/3
Insufficient strength while handle start| Pull the handle quickly and strongly.
Machine oil too thick because of cold weather| Heat the oil
Fuel difficult to burn because of cold weather| Heat the cylinder head

Exhaust gas in black

| Overload| Lower the gear to low speed|

Air filter blocked

| ****

Clean or change filter element

Insufficient fuel| Inspect the supply system of fuel
Problem| Reason| Solution| Remark
---|---|---|---
Exhaust gas in blue| There is excess engine oil in cylinder| Inspect the level of oil, and release the excess oil|
Gap between piston and cylinder is big| Repair to replace the piston ring
Incorrect gap of piston ring| Repair to correct the piston ring gap
Over wearing of valve or valve shaft guide| Repair to replace the valve or valve shaft guide.
Oil leakage from gearbox or crankshaft box| Seal failure| Replace the seal| There are many models of seal, you should point out model or location used

whenever necessary.

Over wear of seal| Replace the seal
Screw loose| Tighten the screw
Mini holes in engine body| Repair by welding or sealing by anti-oil glue

Technical Specification

No.	Description	Unit	Parameter

1

| ****

Model

| ****

—

| ****

KK-MCH- 01D

2

| ****

Structure

| ****

—

| ****

4 wheels, Self-walking

3

| ****

Dimension

| ****

mm

| ****

18208001190

4

| ****

Net weight

| ****

kg

| ****

162

5

| ****

Engine

| ****

model

| ****

—

| ****

KK-DEV- 386

Fuel

| | ****

Diesel

Power

| ****

kW

| ****

5.2kW

Speed

| ****

r/min

| ****

3600

6

| ****

Quantity of tyres

| ****

pcs

| ****

4

---|---|---|---

7

| ****

Size of tyres

| ****

—

| ****

350-6

8

| ****

Transmission mode of walking

| ****

—

| ****

chain

9

| ****

Clutch mode

| ****

—

| ****

Tensioner

10

| ****

Rows

| ****

—

| ****

1

11

| ****

Width

| ****

cm

| ****

42

12

| ****

Line width

| ****

cm

| ****

≥10

13

| ****

Work efficiency

| ****

Hm2/h

| ****

0.1

14

| ****

Recovery ratio

| ****

%

| ****

≥97

15

| ****

Loss ratio

| ****

%

| ****

≤1

16

| ****

Quantity of blades

| ****

pcs

| ****

2*5

17

| ****

MTBF

| ****

h

| ****

50

18

| ****

Environmental noise

| ****

dB

| ****

≤83

19

| ****

Location noise of driver

| ****

dB

| ****

≤97

PRODUCT RANGE

KisanKraft has a large range of products to serve the farmers. A list of our products is given below:

Brush Cutters and Accessories

Brush Cutter/Power Weeder
Backpack Brush Cutter
Tea Pruner
Pole pruner with Engine
Reaper Attachment
Blades-Circular
Blades (2 &3 points)
Baffle
Nylon Rope
Tap & Go

Chainsaws

Petrol Chainsaw
Electric Chainsaw
Chain Sharpening Machine

Engines and Water Pumps

Engine –Diesel-(Horizontal)
Engine –Diesel(Vertical)
Engine-Kerosene
Water Pump with Petrol Engine
Water Pump with Kerosene Engine
Water Pump with Diesel Engine

Hand Tools

Secateurs
Folding Saw
Garden Rake
Garden Shovel
Hedge Shear
Lopper
Telescopic Hedge Shear
Telescopic Lopping Shear
Tree Pruner
Telescopic Steel Pipe & Fruit Picker Bag
Sheep Shear

Garden Tools

Electric Pressure Washer
Hedge Trimmer
Lawn Mower (Electric, Petrol & Manual)
Leaf Blower

Cultivators and Accessories

Petrol and Diesel

Sprayers and Accessories

Battery Sprayer
Portable Power Sprayer
Trolley Sprayer
Manual Knapsack Sprayer
Manual Pressure Sprayer
Rose Cans
Hose Crimping Machine
HTP Sprayer
HTP Delivery Hose
HTP Hose Reel
HTP Stand
HTP Gun / Lance(Brass Rod
Knapsack Power Sprayer
Mister / Duster / Granule Spreader
HTP Sprayer Set with Diesel Engine
HTP Sprayer Set with Kerosene Engine
Fogging Machine

Milking Machine

Wood Shredder
Fodder Ensiling Chaff Cutter
Fodder Grinder Chaff Cutter
Fodder Mini Chaff Cutter

Harvester

Maize Sheller
Maize Sheller + Dehusker
Maize Combine Harvester
Onion Digger Carlotta Italy
Tea Leaf Harvester
Sugarcane Combine Harvester
Sugarcane Leaf Stripper

Transplanter and Post Hole Digger

Paddy Transplanter (2 & 8 Rows)
Transplanter-Vegetable & Tobacco
Post Hole Digger(4” to 14”Augers)

Wide Range of Products for Every Need

$KisanKraft-KK-MCH-01D-Maize-Harvester-fig- $12$$

Warranty

Warranty Certificate
(KISANKRAFT COPY)

Product

| ****

Maize Harvester

| KisanKraft Invoice Date|
---|---|---|---

Brand

| KisanKraft| KisanKraft Invoice No.|

Model

| ****

KK-MCH- 01D

W ARRANTY P ERIOD| ****

6 MONTHS

| FOR THE SPECIFIED PERIOD FROM THE DATE OF SALE OR DELIVERY WHICHEVER IS EARLIER.
Dealer’s Invoice Date| | Dealer’s Invoice No.|
Buyer’s Info (Name, Address, Phone, etc.):| Dealer’s Stamp (Address, Phone, TIN, etc.):
Buyer’s Sign| | Dealer’s Sign|

Warranty Policy

What is covered:
KisanKraft Limited and its manufacturers warrant this product to be free from defects in material or workmanship. All parts defective in material and workmanship are covered.
This warranty will only cover defects arising under normal usage.

This warranty is limited to repair or replacement by KisanKraft Limited or its manufacturers of such parts as appear to KisanKraft or its manufacturers, upon inspection, to be defective in material and/or workmanship. KisanKraft or its manufacturers make no warranty with respect to items not manufactured or sold by them. No onsite warranty is provided by KisanKraft Limited or its manufacturers. Defective items must be brought/sent to our Authorized Dealer or KisanKraft Limited’s office for service.
What is not covered: The warranty shall become null and void and neither KisanKraft Limited nor any of its manufacturers, nor its authorized dealers assume any responsibility, if the failure was caused by the following:

(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage, (6) Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper set up, adjustments, tampering or altered products (8) Any modification to the product what-so-ever.
Important: (1) Normal maintenance and adjustments to the product is the responsibility of the customer. (2) Normal wear and tear are not covered under warranty. (3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell, sparkplugs, nylon line, air filters, fuel filters, oil seals and gaskets etc. are not covered under the warranty. (4) Electrical Motor, Electrical Parts, Battery Etc. are not covered under the warranty.

Incidental/Consequential Loss:
KisanKraft Limited or its manufacturers will not be liable for general damages, including bodily injuries, or for incidental or consequential damages including, but not limited to, loss of use, loss of profits, loss of production, expense of substitute equipment or other commercial loss or damage. This warranty is null & void, if you fail to register the warranty with KisanKraft by sending the KisanKraft Copy with the dealer’s stamp. KisanKraft Limited (formerly known as KisanKraft Machine Tools P Ltd).

Limitation of Liability:
This limited warranty is in lieu of all other express warranties, obligations, or liabilities. Any implied warranties, obligations, or liabilities, including, but not limited to, any implied warranty of merchantability shall be limited in duration to the applicable warranty period. Any action for breach of any warranties hereunder, including, but not limited to, any implied warranty of merchantability must be brought within the applicable warranty period.

Modifications of Warranty:
No agent, representative, dealer, or employee of KisanKraft Limited or any of its manufacturers has the authority to increase or alter the obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not transfer if the product is resold by the first buyer. The above warranties are extended to the first end user (original purchaser), and no warranty is made, nor authorized to be made assignable on resale by the first end user.

What you must do to obtain limited warranty service:
To obtain performance of any obligation under this warranty for failure during the applicable warranty period, you must deliver the defective product, to the nearest Authorized Dealer, along with proof of purchase (invoice/receipt). KisanKraft Limited, its manufacturers and its dealers reserve the right to inspect the claimed defective part(s) to determine if the malfunction is the result of a defect covered by this warranty. Please note that the decision of KisanKraft Limited with respect to any warranty claim is final.

After-sales Service (Including Warranty):
KisanKraft Limited does not sell directly to consumers. All sales or supplies are made through Authorized Dealers. It is the responsibility of the Authorized Dealer to provide all after-sales service to consumers. Any warranty claim should be raised by dealer to KisanKraft Limited as per warranty policy.

Jurisdiction:
All disputes are subject to Bangalore court’s jurisdiction.

Notes:

This purchase is not contingent upon a product demonstration. The purchaser shall satisfy himself with the product, including any product demonstration or verification of any function, before buying. KisanKraft Limited or its authorized dealers, including online sellers, shall not be liable to give any on-site demonstration after the purchase of any of the product.
Any product once used will not be taken back by KisanKraft Limited.
Warranty and After-Sale Services (including but not limited to installation, Demonstration, Repair, Routine Maintenance etc.), should be done through the Authorized Dealer selling this product.
Dealers should have their own technicians to provide After Sales Services to their Customers. KisanKraft Limited provides free training to Authorized Dealer’s technicians at KisanKraft Limited’s head office, on request from Authorized Dealer.

This warranty is null & void if you fail to register the warranty with KisanKraft by sending the KisanKraft Copy with the dealer’s stamp. KisanKraft Limited (formerly known as KisanKraft Machine Tools P Ltd)