EVOLVEO Detective IP8 SMART Detective Camera System Instruction Manual

June 10, 2024
Evolveo

Detective IP8 SMART Detective Camera System

Product Information: Detective IP8 SMART

The Detective IP8 SMART is a surveillance system that allows users to monitor their property remotely. It supports up to 8TB of 3.5 or 2.5 HDDs for storage, and offers basic interface control and recording schedule settings. The device also comes with a guide to help users through the basic settings and to operate the machine.

Product Usage Instructions

1. Hard Disk Installation

Caution: turn off the power to the device before installation.

  1. Unscrew the screws on the cover and remove the top cover.
  2. Align the screw holes on the bottom of the HDD and the case and screw in the screws one by one.
  3. Connect the HDD cable and power cable to the motherboard, and connect the other end to the HDD.
  4. Cover the top cover and fix it with the screws.
2. Connection Method

Follow the instructions provided in the manual to connect the device to your network.

3. Basic Interface Control

User Password Settings:

  1. When the system is turned on, the Set User Password interface will automatically appear.

  2. Click on the text box after Username and enter a username, the default system username is admin.

  3. Click on the text box after Password and enter your password.
    The default system password is 888888.

  4. Click on the Confirm button to complete the login.

  5. Click on Pattern Unlock and log in using the pattern you have set.

  6. Click on the Forget Password button to retrieve your password via the contact details you have entered.

Turn Off:

  1. Click the Shut down button in the main menu.
  2. Click on the Power Off button and turn off the system.
4. Guide

After logging in, the Guide-General Setting interface opens by default, which guides the user through the basic settings to allow the machine to operate normally. Follow the steps provided in the manual to complete the settings.

5. Remote Device

Click on Remote Device to enter and monitor your property remotely. Follow the instructions provided in the manual.

6. Preview

After a successful login, the device will go to the preview screen. Each preview screen shows the date/time/channel name, and at the bottom of the screen there is a line indicating the recording and alarm status of each channel.

7. Recording Schedule Settings

Feature illustration: Used to set the recording schedule. By default, the system will allow all-day recording.

  1. Click on Main Menu -> Storage Settings, the interface for recording settings will open.
  2. Click and select Free [1], Normal [2], Triggered [3], Intelligence [4] and set the recording schedule for the current channel, the minimum range is 30 minutes.

Important safety instructions and warnings:

  • Do not place heavy objects on the NVR.

  • Avoid dropping solid objects on the NVR, spilling liquids on the NVR, or intrusion
    solid objects or liquids into the NVR device.

  • Regularly clean the circuit boards, connectors, fans, equipment enclosure, etc. Before cleaning from dust, turn off the device and disconnect it from the power supply.

  • Do not disassemble or repair the NVR by yourself. Do not replace parts yourself.

Environment:

  • Place and use the NVR in temperatures between 0 and 40 degrees Celsius. Protect it from direct sunlight. Place it at a greater distance from the heat source.
  • Do not install the NVR in a humid environment.
  • Do not use the NVR in a smoky or dusty environment.
  • Protect it from bumping or falling.
  • Ensure that the NVR is installed horizontally in a stable working environment.
  • Please install it in a well-ventilated place. Keep the vents clean.

Main functions

Real-time monitoring

  • Analog VGA and HDMI interface, monitor function via monitor or displays
    Repository

  • The hard disk does not operate during the idle interval, which contributes to less heat radiation, lower power consumption and longer life

  • A special file storage format that ensures high data security
    Backup

  • Via SATA and USB to USB device, portable hard drive, etc.

  • By downloading files to your hard drive over the network
    Play

  • Individual real-time video recording as well as search, playback, network monitoring, record check, download, etc.

  • Multi-window playback mode

  • Magnify any area
    Network traffic

  • Real-time remote network monitoring

  • Remote recording control and real-time playback
    Intelligent control

  • Mouse action

  • Fast copy and paste to ensure the same setup

Hard disk installation
Caution: turn off the power to the device before installation. 3.5″ or 2.5″ HDDs up to 8TB can be used.
Step 1: Unscrew the screws on the cover and remove the top cover, picture below.
Step 2: Align the screw holes on the bottom of the HDD and the case and screw in the screws one by one. Connect the HDD cable and power cable to the motherboard, and connect the other end to the HDD. Step 3: Cover the top cover and fix it with the screws.

Installation notes:

  1. Keep the instrument out of humid, high temperature and highly magnetic environments, place it in a well-ventilated area.
  2. Please use HDDs purchased from verified suppliers.
  3. Ensure that the device is properly grounded and that the power supply does not exceed the operating voltage range, we recommend using the supplied power supply.
  4. Do not shut down the device directly when it is running, first shut it down through the software system and disconnect it to avoid damaging the hard disk.

Connection method

Basic interface control

  1. User password settings
    When the system is turned on, the “Set User Password” interface will automatically appear as shown below:

  2. Click on the text box after “Password” and enter the password you want to change. The default system password is “888888”.

  3. Click on the text box after “Password Confirm” and enter the password again to verify it is correct. The default system password is “888888”.

  4. Click on the text box after “Contact Info” and enter your contact details to ensure that you can retrieve your password by contacting them if you forget your password. (Format example: 420-720xxxxxxxxxxx in the Czech Republic, 1-202xxxxxxxxxx in the United States) or by e-mail (e.g. servis@evolveo.com).

  5. Click on the text box after “Info Confirm” and re-enter your contact details to ensure that the information you have entered is correct.

  6. Click the “Next” button to finish setting the user password.

  7. Password changes can be skipped depending on the trustworthiness of the users.

  8. Login
    When the system is powered on, the “Login – Default” interface is automatically displayed, as shown in the following image: Steps:

  9. Click on the text box after “Username” and enter a username, the default system username is “admin”.

  10. Click on the text box after “Password” and enter your password. The default system password is “888888”.

  11. Click on the “Confirm” button to complete the login.

  12. Click on “Pattern Unlock” and log in using the pattern you have set.

  13.  Click on the “Forget Password” button to retrieve your password via the contact details you have entered.

  14. Turn off
    Illustration of function: shutdown and restart can be controlled.
    Steps:

  15. Click the “Shut down” button in the main menu, then the interface below will be displayed:

  16. Click on the “Power Off” button and turn off the system.

  17. Guide
    After logging in, the “Guide-General Setting” interface opens by default, which guides the user through the basic settings to allow the machine to operate normally.
    Steps:

  18. Settings 1: The user can set the language/transparency/resolution and other menu options, see the following image:

  19. Settings 2: System Time / Time Zone Settings / Daylight Saving Time and other menu options can be set by users, see image below:

  20. Settings 3: The network connection can be set up by users, see image below:

  21. Settings 4: Users set up recording schedules according to their needs, see image below:

  22. Settings 5:Users can set the format and recording schedule of HDD, see the figure below:

  23. Settings 6: Information about all IPC devices of this NVR will be displayed, and click “Finish” to complete the configuration of the startup wizard.

  24. Remote device
    The wizard is completed or click on ” Remote Device” to enter, the image is as follows: [Device Search] Click ” Device Search” to search for a device.
    [Add] Check the devices you are looking for and click the “Add” button to add the device.
    [Customize] ” Manually add” devices based on the IP address of the device.
    [One-click add] Add all searched devices.
    [Bulk IP Edit] Search for a device and edit the IP address of the device in the group.
    [Remove] After you have successfully added a device, you can remove it.
    [Upgrade] After successfully adding the device, you can upgrade the firmware after checking.
    [Channel parameter] After successfully adding a device, you can edit the channel information of the device. [Channel Name] The channel name can be changed after the device is successfully added.
    [Image editing] After successfully adding the device, you can enter the image editing interface.
    [Import\Export] After successfully adding the device, you can import/export the device channel configuration information.
    [Show Password] Enter the administrator password, the camera user password will be displayed.
    [Previous step] Return to the previous interface.
    [Completed] The boot wizard is complete, go to the preview interface.

  25. Preview
    After a successful login, the device will go to the preview screen. Each preview screen shows the date/time/channel name, and at the bottom of the screen there is a line indicating the recording and alarm status of each channel, see figure below:.

  26. Recording schedule settings
    Feature illustration: Used to set the recording schedule. By default, the system will allow all-day recording. Steps:

  27. Click on “Main Menu” -> ” Storage Settings”, the interface for recording settings will open, the picture is shown below:

  28. Click and select “Free [1]”, “Normal [2]”, “Triggered [3]”, “Intelligence [4]” and set the recording schedule for the current channel, the minimum range is 30 minutes.

  29. After selecting the record type, simply drag the mouse to complete the settings for removing or adding the record plan. You can also click the button on the left to quickly set it up.

  30. Once the current channel has been set, you can select the channel to be copied by selecting “Copy this setting to other channels” and clicking the “Apply” button to save it.

  31. Video playback
    Feature illustration: It is used to query and play a recording of any channel.
    Steps:

  32. Click on the “Recording Inquiry” menu or “Main menu” -> “Recording Inquiry”, the video playback interface will open, the picture is shown below:

Network Video Recorder Operating Instructions

  1. Make sure the network video recorder is properly connected to the network (network cable and power connection).
  2. In the main interface of the network video recorder, click “Remote Device” -> Device Search -> Search Camera, the interface will be displayed as shown in Figure 1-1. Figure 1-1 Figure 1-2
  3. Display the IP address you are looking for, for example 192.168.8.88, and the IP range is 8, if the IP range of your network video recorder is the same as range 8, you can go directly to step 5, if not, you need to adjust the IP camera segment to match your network video recorder.
  4. Select the device, click the “Modify IP In Batches” button as shown in Figure 1-2, and then change both the IP address and IP range of Gateway 8 to the same IP range that is consistent with the network video recorder, click the “Confirm” button, and click the “Device Search ” button again.
  5. Click the “(Select All” button and then click the “Add” button, as shown in Figure 1-3. Figure 1-3
  6. Right-click to exit the interface and view a preview of the device renderer.

Management by PC

  1. Install the iCMS client on your computer download at www.evolveo.com
  2. Log in to the system
  3. Login client, username: admin, password: admin. The interface appears as shown in Figure 3-1. Figure 3-1
  4. Check that the network video recorder with hard disk is properly connected to the network. (Connect the power cord and power supply)
  5. Set the IP address, subnet mask and gateway for the host computer and the network video recorder with hard disk (if there is no router on the network, assign the IP address of the same network range. If there is a router on the network, you need to set the appropriate gateway and subnet. Netmask), the network settings of the network hard disk VCR can be found in [Main Menu]>[Network Settings].
  6. Using the command line command “CMD”, you can check whether the NVR is connected by using the command “ping ...” (IP address of the network video recorder).
  7. Open the client, click “Device Management” -> “Search” and click the Add button as shown in Figure 3-2. 2.6 After successfully adding, select “Video Preview”, click the preview of the video output device, and the interface shown in Figure 3-3 will be displayed. Figure 3-2 Figure 3-3

Remote connection to Tuya Smart APP
Remark: Before using the Smart Life remote connection, make sure the network video recorder is already connected to the Internet.
Step 1: Download the Smart Life app

  1. Android users can download the “Smart Life” app via the APP Market.
  2. An iOS user can download the ” Smart Life ” app via the APP Store.
  3. Android and iOS users can scan the following QR code and download the “Smart Life” app.
  4. Open the ” Smart Life ” app and press the “Register” button to register a new account. If you have an account, you can log in with your account and password. Step 2: To add a network video recorder with a hard drive to Smart Life
  5. Make sure that the wireless network connection of the mobile phone and the network video recorder and hard disk drive are on the same local network.
  6. Open the ” Smart Life ” app and log in successfully, click the [Add Device] button or click the [+] button to add a device as shown below:
  7. Access the [Manual Add] page, select [Video Surveillance], and click the NVR icon as shown below:
  8. Follow the instructions on the page to verify that the power to the network video recorder with hard drive and the network light are steady and blue, and then click the “Next” button to enter the connected device page as shown below:
  9. After successfully connecting the device, select the “Add Device” option, click the [+] button to enter the connection page, and after being prompted that the addition was successful, click the “Finish” button to successfully add the device as shown in the figure below:
  10. To preview the image, click the corresponding smart camera, enter the real-time image preview page, and click the [Multi-channel Preview] button to perform simultaneous multi-channel preview as shown below:

Security measures

  1. Do not place any containers (e.g. vases) with liquid on the VCR.
  2. The network video recorder should be placed in a sufficiently ventilated area to avoid blocking the air vents.
  3. Check the power supply and voltage to prevent damage due to voltage mismatch.
  4. The network video recorder should operate within the temperature and humidity range allowed by the technical specifications.
  5. The network video recorder should be placed horizontally. Avoid installation in environments with high vibration.
  6. Dust on the circuit board can cause a short circuit when it gets wet. In order to keep the NVR working normally for a long time, you can periodically use a brush to remove the dust on the circuit board/interconnect panel/enclosure etc.
  7. Improper battery replacement can cause an explosion. It is not recommended to replace the battery yourself. If you need to replace it, only replace it with the same type of battery, do not attempt to open or repair the battery.
  8. the installation and location of the network video recorder shall be in accordance with the specifications, which may refer to relevant local standards.

FAQ

  • Q: Is the camera waterproof
    A: Equipped with IP 66 protection, the camera will function when exposed to weather conditions such as rain and snow. However, for proper operation it is necessary that the power connector and the mains connector are covered, otherwise the camera loses its degree of protection and the claim cannot be accepted.

  • Q: Camera cannot be added
    A: check the correct IP address range of the camera and recording device, make sure you have entered the correct camera login details

  • Q: Remote monitoring via mobile app does not work
    A: Check the network connection of the NVR and the availability of the Internet connection. Make sure your PC is in the same IP range as the NVR.

The warranty does NOT cover:

  • using the equipment for purposes other than those for which it is designed,
  • installing firmware other than that installed on the device
  • electrical or mechanical damage caused by improper use
  • damage caused by natural elements such as water, fire, static electricity, power surges, etc.
  • damage caused by repairs carried out by an unqualified person
  • illegible serial number
  • battery capacity drops after 6 months of use (6 month battery life guarantee)

Disposal
The crossed-out container symbol on the product, in the accompanying documentation or on the packaging reminds you that in EU countries, all electrical and electronic equipment, batteries and accumulators must be disposed of separately at the end of their useful life as part of sorted waste. Do not dispose of these products in unsorted municipal waste.

CE DECLARATION OF CONFORMITY

Abacus Electric, s.r.o. hereby declares that the product EVOLVEO SEA DET- WNSCAM,
The SEA DET-POE8DOM, SEA DET-POE8CAM meets the requirements of the standards and regulations that are relevant to the type of equipment.
The full text of the Declaration of Conformity can be found at ftp://ftp.evolveo.com/ce

Importer
Abacus Electric, s.r.o.
Planá 2, 370 01, Czech Republic

Producer
Naxya Limited
No.5, 17/F, Strand 50, 50 Bonham Strand, Sheung Wan, Hong Kong
Made in China
Copyright © Abacus Electric, s.r.o.
www.evolveo.com
www.facebook.com/EvolveoCZ
All rights reserved.
The appearance and technical specifications of the product are subject to change without notice.

NVR Power Adaptor|
---|---
Information published| Value and precision| Unit
Manufacturer’s name or trade mark, commercial registration number and address| Dongguan Sunun Power Co., Ltd|

Model identifier| SA24BH-120200V| –
Input voltage| 100~240Vac| V
Input AC frequency| 50/60Hz+/-3Hz| Hz
Output voltage| 11.4~12.6Vdc| V
Output current| 2A| A
Output power| 24W| W
Average active efficiency| 86%| %
Efficiency at low load (10 %)| 88%| %
No-load power consumption| 0.1W| W
Camera Power Adaptor|
Information published| Value and precision| Unit
Manufacturer’s name or trade mark, commercial registration number and address| Zhuhai Bright Source Electronic Science & Technology Co., LTD|

Model identifier| CYH012S012V1000E| –
Input voltage| 100~240Vac| V
Input AC frequency| 50/60Hz+/-3Hz| Hz
Output voltage| 11.4~12.6Vdc| V
Output current| 1A| A
Output power| 12W| W
Average active efficiency| 83%| %
Efficiency at low load (10 %)| 83%| %
No-load power consumption| 0.1W| W

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals