BiG DoT OF HAPPINESS 1 Sign and Ribbon Front Door Decor Instruction Manual
- June 12, 2024
- Big Dot of Happiness
Table of Contents
Assembly
Instructions
Includes 1 Sign and Ribbon
1 Sign and Ribbon Front Door Decor
ASSEMBLY TIP: Lay out the 3 Sign Pieces on a flat surface in descending
order to help you visualize the completed sign. The Top Piece has one pre-cut
hole for hanging.
CARE TIP: For best results, display in temperatures no higher than 130ºF
and hang on outermost door as placing between two doors risks exposure to
excessive heat.
- Remove Ribbon from packaging and cut 1st Ribbon Strip to desired length for hanging Sign. Cut 2nd and 3rd Ribbon Strips into 30-inch lengths.
- Take the Top Piece and string 1st Ribbon Strip through the top hole. Tie Ribbon ends into a knot.
- Along the back of the Sign, string 2nd Ribbon Strip into the top holes of the Middle Piece and through the bottom holes of the Top Piece.
- Tie Ribbon in a knot behind the Top Piece.
- Using the 3rd Ribbon Strip, connect the Bottom Piece to the Middle Piece in the same manner as step 3. Tie Ribbon in a knot behind the Middle Piece.
- Hang the Sign in your desired location.
© BIG DOT OF HAPPINESS®, LLC.
Documents / Resources
| BiG
DoT OF HAPPINESS 1 Sign and Ribbon Front Door
Decor
[pdf] Instruction Manual
THDBD4219fd3, 194373105940, 0194373105940, 1 Sign and Ribbon Front Door Decor,
Front Door Decor, Door Decor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>