Digital Watchdog DWC-PZCMW Ceiling Mount Bracket for Multi Sensor Cameras User Guide
- June 10, 2024
- DIGITAL WATCHDOG
Table of Contents
Digital Watchdog DWC-PZCMW Ceiling Mount Bracket for Multi Sensor Cameras
Product Information
The DWC-PZCMW is a ceiling mount bracket designed for use with multi-sensor cameras. The package includes camera mounting screws, mounting pad, screws and plastic anchors, mounting template, safety wire, quick setup guide, and hexagonal wrench. The product can be installed easily by marking and drilling necessary holes on the mounting surface, securing the mounting bracket using screws and anchors, affixing the safety wire, passing wires through and making all necessary connections, securing the camera to the mounting bracket using included screws, aligning the indented lines on the camera with those on the mounting bracket, and adjusting the camera modules’ position and angle before placing the dome cover on the camera.
Product Usage Instructions
- Using the mounting template or the mounting bracket itself, mark and drill the necessary holes on the mounting surface.
- Secure the mounting bracket to the mounting surface using the screws and anchors included. Use the mounting pad between the bracket’s arm and mounting surface as needed.
- Affix the safety wire at the bottom of the mounting bracket’s case. Connect the other side of the safety wire to the base of the camera.
- Pass wires through and make all necessary connections.
- Secure the camera to the mounting bracket using the included screws. Align the indented lines on the side of the camera with the lines on the mounting bracket as seen in the image on the right. Rotate the camera clockwise to lock into position.
- Adjust the camera modules’ position and angle and complete the installation by placing the dome cover on the camera. Secure the dome cover to the camera base using the screws included with the camera. See the camera’s QSG for more information.
Note: Do not touch the lenses when handling the camera modules.
WHAT’S IN THE BOX
Camera Mounting Screws
| |
2
|
Mounting Pad
|
---|---|---|---|---
Screws and Plastic Anchors
| |
4
|
Mounting Template
|
Safety Wire
| |
1
|
Quick Setup Guide
|
Hexagonal Wrench
| |
1
| |
NOTE: Download all your support materials and tools in one place.
- Go to: http://www.digital-watchdog.com/resources
- Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will populate automatically based on the part number you enter.
- Click ‘Search’. All supported materials, including manuals and quick start guide (QSGs) will appear in the results.
INSTALLATION
- Using the mounting template or the mounting bracket itself, mark and drill the necessary holes on the mounting surface.
- Secure the mounting bracket to the mounting surface using the screws and anchors included. Use the mounting pad between the bracket’s arm and mounting surface as needed.
- Affix the safety wire at the bottom of the mounting bracket’s case. Connect the other side of the safety wire to the base of the camera.
- Pass wires through and make all necessary connections.
- Secure the camera to the mounting bracket using the included screws. Align the indented lines on the side of the camera with the lines on the mounting bracket as seen in the image on the right. Rotate the camera clockwise to lock into position.
- Adjust the camera modules’ position and angle and complete the installation by placing the dome cover on the camera. Secure the dome cover to the camera base using the screws included with the camera. See the camera’s QSG for more information.
NOTE: Do not touch the lenses when handling the camera modules.
CONTACT
- Tel: +1 866-446-3595
- Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>