DIGITAL WATCHDOG DW-BJP1U-LX DW Spectrum IPVMS User Guide

DIGITAL WATCHDOG DW-BJP1U-LX DW Spectrum IPVMS

Specifications:

• Part Number:

  • DW-BJP1UXT
  • DW-BJP2UXT
  • DW-BJPR2UXXT

• Included IP licenses: 4

• Form Factor: Rackmount

• Operating System:

  • DW-BJP1UXT, DW-BJP1UXT-LX: 150GB SSD
  • DW-BJP2UXT, DW-BJP2UXT-LX: 150GB SSD
  • DW-BJPR2UXXT, DW-BJPR2UXXT-LX: 150GB SSD

• CPU: 16GB

• Memory: 1x 1 Gigabit ethernet port (RJ45), 1x 2.5 Gigabit ethernet port (RJ45)

• Max Video Storage Rate (Mbps): 360 Mbps, 600 Mbps, 600
  Mbps

• Maximum HDD: 3 x 3.5 SATA HDD, 7 x 3.5 SATA HDD, 6 x 3.5 SATA
  HDD

• Maximum Storage RAID Options:

  • 60TB N/A
  • 120TB N/A
  • 120TB raw storage (100TB RAID5) RAID5

• USB Interface: Yes

• Outputs: True HD output or DVI

• Video-out: GeForce 210 1024MB

• Resolution: Max 2560 x 1600 @ 60Hz

• Pre-loaded VMS Software: Included

• Remote Clients: Included

• Keyboard and Mouse: Included

• Rail Kit: Included

• Power Supply: 300W, 400W, 400W** (UPS recommended)

• Operating Temperature: 20~90% RH

• Operating Humidity: 20~90% RH

• Dimension (WxDxH):

  • 17.1875 x 20.065 x 1.75 (437 x 510 x 44.45 mm)
  • 17.3 x 21.9 x 3.5 (439.3 x 557.1 x 88.9 mm)
  • 17.3 x 21.9 x 3.5 (439.3 x 557.1 x 88.9 mm)

• Other Certification: FCC, CE, NDAA, TAA

• Warranty: 5 year limited

Product Usage Instructions

Setting Up the Server:

1. Connect the POE switch for cameras to the server.
2. Double-click on the date and time icon on the desktop.
3. If the time zone is incorrect, change it accordingly.

Frequently Asked Questions

Q: What are the default login credentials for the server’s OS?

A: The default username is ‘admin’ with a password of ‘admin12345’.

Q: What are the default login credentials for the P-RackTM server?

A: The default username is ‘dwuser’ with a password of ‘Dw5pectrum’.

Q: Where can I find support materials and tools for the product?

A: You can download all support materials and tools from the official website by following these steps:

1. Go to: Digital Watchdog Support Downloads.
2. Enter the part number in the ‘Search by Product’ search bar.
3. Click ‘Search’ to find all relevant materials including manuals, Quick Start Guides (QSG), software, and firmware.

State-of-the-art hyper-optimized video management platform designed for ease, speed and efficiency. Blackjack® P-Rack™ — Up to 600Mbps.

WHAT’S IN THE BOX

NOTE: Download all your support materials and tools in one place.

1. Go to: http://www.digital-watchdog.com/support-download
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals, Quick Start Guides (QSG), software and firmware will appear in the results.

Attention: This document is intended to serve as a quick reference for initial setup. See the DW Spectrum® IPVMS full manual for more information on features and functionality

HARDWARE

BLACKJACK® P-RACK™ HARDWARE

• F1 2x USB 2.0 ports
• F2 Power button
• F3 HDD status LED

• B1 Power input
• B2 Keyboard port (PS2 type)
• B3 USB 2.0 ports
• B4 Serial ports (Not used)
• B5 Network ports
• B6 USB 3.0 ports
• B7 Audio ports
• B8 DVI-I output
• B9 True HD output

SPECIFICATIONS

Operating system

| Windows® 10| DW-BJP1UXT| DW-BJP2UXT| DW-BJPR2UXXT
Linux Ubuntu® OS| DW-BJP1UXT-LX| DW-BJP2UXT-LX| DW-BJPR2UXXT-LX
OS on SSD| 150GB SSD| 150GB SSD| 150GB SSD
CPU| Intel® i5® processor| Intel®i7® processor| Intel®i7® processor
Memory| 16GB| 16GB| 16GB
Ethernet port| 1x 1 Gigabit ethernet port (RJ45) 1x 2.5 Gigabit ethernet port (RJ45)| 1x 1 Gigabit ethernet port (RJ45) 1x 2.5 Gigabit ethernet port (RJ45)| 1x 1 Gigabit ethernet port (RJ45) 1x 2.5 Gigabit ethernet port (RJ45)
System| Max video storage rate (Mbps)| 360 Mbps| 600 Mbps| 600 Mbps

Storage

| Maximum HDD| 3 x 3.5 SATA HDD| 7 x 3.5 SATA HDD| 6 x 3.5 SATA HDD
Maximum storage| 60TB| 120TB| 120TB raw storage (100TB RAID5)
RAID options| N/A| N/A| RAID5
USB interface| Yes| Yes| Yes

Video-out

| Outputs| True HD output or DVI| True HD output or DVI| True HD output or DVI
Video card| GeForce 210 1024MB| GeForce 210 1024MB| GeForce 210 1024MB
Resolution| Max 2560 x 1600 @ 60Hz| Max 2560 x 1600 @ 60Hz| Max 2560 x 1600 @ 60Hz
Pre-loaded VMS software| DW Spectrum® IPVMS| DW Spectrum® IPVMS| DW Spectrum® IPVMS
Remote clients| Cross-platform – Windows®, Linux Ubuntu® and Mac®| Cross- platform – Windows®, Linux Ubuntu® and Mac®| Cross-platform – Windows®, Linux Ubuntu® and Mac®
Keyboard and mouse| Included| Included| Included
Rail kit| Included| Included| Included
Power supply| 300W| 400W| 400W**
Operating temperature| 41°F~104°F (5°C~40°C)| 41°F~104°F (5°C~40°C)| 41°F~104°F (5°C~40°C)
Operating humidity| 20~90% RH| 20~90% RH| 20~90% RH
Dimension (WxDxH)| 17.1875 x 20.065” x 1.75” (437 x 510 x 44.45 mm)| 17.3” x 21.9” x 3.5” (439.3 x 557.1 x 88.9 mm)| 17.3” x 21.9” x 3.5” (439.3 x 557.1 x 88.9 mm)
Other certification| FCC, CE, NDAA, TAA| FCC, CE, NDAA, TAA| FCC, CE, NDAA, TAA
Warranty| 5 year limited| 5 year limited| 5 year limited

SETTING UP THE SERVER

STEP 1: Connect external devices, power and network.

1. Connect a monitor, USB keyboard, USB mouse and network cable to one of the Ethernet ports (B7 on the diagram). Configure the camera’s network first, then configure the server’s local network.
2. Connect the server to an appropriate power source. It is recommended to use a UPS system. * Recommended to use 750VA or higher for the 1U P-RACK and 1000VA or higher for the 2U P-RACK
3. Power up the server if the server does not turn on automatically by pressing the power button on the front of the server. (F2 on the diagram). * Connecting the power cable to the live power source may turn on the server automatically

STEP 2: Configure date and time Windows

1. Double-click on the date and time icon on the desktop.
2. Change time zone if it is not correct (the default is UTC-08:00 Pacific Time).

Press OK after selecting the correct time zone.

Click “Change date and time..” to update the date and time if they are not correct.

•  Verify the time zone before updating the date and time. Time may show 2 or 3 hours off due to an incorrect time zone.

Press OK after adjusting to the correct date and/or time.

• Press OK to close the date and time when done.

1. Open Settings.
2. Click Details.
3. Click Date &Time
4. Turn OFF Automatic Date & Time and Automatic Time Zone
5. Click Date & Time and set correct date and time
6. Click Time Zone and set to correct Time zone. (Type one of the largest cities in the time zone).
7. Close Settings.

STEP 3: Configure network

Please have the following information ready before starting the network configuration

The camera network and local network cannot be on the same network.

• NOTE The Blackjack® server’s network settings are set to DHCP as default.
• NOTE If you are not sure what information to enter, contact your Network Administrator or Internet Service Provider for the information

Windows

1. Double-click on the “Network Connections” on the desktop.

2. Right-click on “Ethernet with cable connected” and click “Properties”.

3. Select “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties”.

4. Select “Use the following IP address” (Use the following DNS server addresses will be selected automatically).

5. Enter the IP address and Subnet mask of the camera network. (Do not enter anything for the default gateway, preferred DNS server and alternate DNS server.

6. Click OK to close then click close to go back to network connections.
   Local Network

7. Right-click on the other Ethernet, the one with network cable unplugged, and click “Properties”.

8. Select “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties

9. Select “Use the following IP address” (Use the following DNS server addresses will be selected automatically).

10. Enter IP address and subnet mask of the camera network.

11. Click OK to close then click close to go back to network connections.

12. Connect a network cable to the Ethernet port B2 (1.5G) and B7 (2.5G) on the diagram (page 2) to the switch on the local network.

13. Close the network connections dialogue.

Linux®

1. Open Settings > Network
2. Click Setting of the Realtek Ethernet.
3. Change to Manual then enter Address, Netmask, Gateway.

• Do not enter Gateway information if there is no Gateway in this network. 4. Click Apply to save. 5. Restart the connection by switching OFF then turn ON. If the connection is off, connect the network cable. 6. Click Settings of the Intel Ethernet. 7. Change the settings if needed to access the Internet and for remote access from a local network. 8. Click Apply to save. 9. Restart the connection by switching OFF then turn ON. If the connection is off, connect the network cable.
  

NOTE If you are not connecting to the Blackjack® from the same network, you may be required to perform port forwarding on your router to access the server. Contact your Network Administrator or Installer for additional information

CONFIGURE CAMERAS USING DW® IP FINDER™

Refer to the camera’s QSG to configure any DW® IP camera’s IP address using DW® IP finder™. DW Spectrum® IPVMS client

SETTING UP DW SPECTRUM® MEDIA SERVER

• Login: admin
• Password: admin12345

STEP 1: Initial run from the Blackjack® server

1. Open the DW Spectrum® client by double-clicking on the DW Spectrum® icon .
2. Click on the pre-configured server.
3. If the pre-configured server does not automatically log in, enter the password and click Connect. *Default password: admin12345 (case sensitive).

STEP 2: To rename the server

1. Right-click on the server name listed on the resources then click server settings.
2. Go to the general tab and enter the new server name in the name field. Click OK.

STEP 3: To check for updates

1. Click on the menu then click “System Administration”.
2. Go to the updates tab. If the system requires updating, click on the update system button.

• If you are on the latest version, it will say “You have the latest version installed” and the Update System button will be disabled. 3. Click OK when the update is completed

STEP 4: Enter and activate licenses

1. Go to the system administration window and click on the license tab.
2. Enter the license key and click “Activate License”. An Internet connection is required.

• Click on “Activate Trial License” if you have not purchased a valid license key. 3. Click OK to when the license key is activated.

STEP 5: Configure recording

1. Right-click on a camera in the resource tree to setup recording. Click on camera settings from the context menu.

2. Go to the recordings tab.

3. Click to turn on the recording.

4. Configure the camera’s schedule settings for quality, FPS and recording type.

5. Click and drag the mouse over the recording schedule to apply the settings to multiple days and times
   Click “All” to apply the recording settings to the entire schedule.

6. A red dot will appear next to the camera in the resource tree once the recording is started.

NOTE: A Recording License is required to allow each camera to the archive

STEP 6: Backup database

1. Go to the system administration window and click on the general tab.
2. Click “Create Backup…”.
3. Navigate to the folder you want to save the database and enter a name for the backup file. Click save.

• It is strongly recommended to create a Database Backup to external storage media before and after every update in the event that a system restore point is needed

  • NOTE: More information and instructions are available in the DW Spectrum® IPVMS user manual.
  • NOTE: A Recording License is required to allow each camera to the archive.
  • NOTE: This product is covered by one or more claims of the HEVC Patents listed at patentlist.accessadvance.com.

TROUBLESHOOTING

My camera does not auto-discover

| 1.    Is the camera in the same LAN network as the media server?

2.    Is your camera compatible with DW Spectrum? (Refer to our website for full list of supported cameras.)

3.    Is the camera updated to its latest firmware?

4.    If your camera is integrated with DW Spectrum via ONVIF, make sure ONVIF is enabled on your camera.

5.    Try adding the camera manually.

6.    Try rebooting the server after installation. Allow up to 2 minutes for the server to map your network and detect all supported devices.

Videos are slow| 1.    Are you accessing the same cameras from multiple clients? (LAN and WAN)

2.    Do you have a Gigabit network? Check your network speed.

My camera appears disconnected

| 1.    Under camera settings, make sure the user name and password are correct.

2.    Under the camera settings, use the ‘Ping’ button to make sure the camera is connected to the network properly.

3.    If you can connect to the camera’s web viewer, try rebooting the camera and/or restore it to factory default.

4.    Make sure your camera is using the latest firmware available.

5.    Make sure that the camera is connected to the same network as the server.

6.    If you are connecting to a camera that is integrated with DW Spectrum via the ONVIF protocol (see list), make sure ONVIF is enabled.

7.    Make sure your user has permission to view that specific camera.

I cannot get playback video from my camera| 1.    Do you have a network connection between client and server (in case server and client are not on the same machine)?

2.    Make sure your user has playback viewing permissions for the selected channel.

3.    Make sure the camera is set to a recording mode that would provide recorded video for the selected time and environment.

4.    On the server side, check the media server log to make sure the camera you are trying to watch has not been unexpectedly disconnected.

I get an ‘unauthorized’ message on my camera| 1.    Make sure the camera’s user name and password are properly entered in the camera’s general information under the camera settings menu.

2.    If necessary, try rebooting the camera to apply the camera’s username and password.

DW SPECTRUM SYSTEM REQUIREMENTS

Recommended specs for the full client

 | Single-monitor DW Spectrum workstation| Dual-monitor DW Spectrum workstation| Quad-monitor DW Spectrum workstation
---|---|---|---
Processor| Intel i5 8th gen or AMD Ryzen 5 3000

Quad-Core or better

| Intel i7 8th gen or AMD Ryzen 7 3000 Quad-

Core or better

| Intel i9 or AMD Ryzen 9 Quad-Core or better
Video card| Intel HD Graphics onboard GPU or better| Intel HD Graphics onboard GPU or better| GeForce GTX 1650 or better
RAM| 8 GB DDR3 1600 MHz or better| 16 GB DDR3 1600 MHz or better| 32 GB or better
NIC| 1Gbps or better| 2 x 1 Gbit or better| 2 x 1 Gbit or better
Storage| Dedicated SSD or NVME disk for the OS, 128 GB or larger| Dedicated SSD or NVME disk for the OS, 128 GB or larger| Dedicated SSD or NVME disk for the OS, 128 GB or larger

OS

supported

| Microsoft Windows OS (supported by both DW Spectrum® Server and Client).

• Windows 8 – Released: October 2012 | EoS: 01/2023

• Windows 8.1 – Released: October 2013 | EoS: 01/2023

• Windows 10 – Released: July 2015

• Windows Server 2012 – Released: August 2012 | EoS: 10/2023

• Windows Server 2012 R2 – Released: October 2013 | EoS: 10/2023

• Windows Server 2016 – Released: October 2016 | EoS: 01/2027

• Windows Server 2019 – Released: October 2018 | EoS: 01/2029

• Windows Server 2022 – Released: August 2021 | EoS: 10/2031

**NOTE: DW Spectrum IPVMS for Windows can be installed as a software bundle or the Server and Client software can be installed separately.

Ubuntu (Debian-based Linux) OS (supported by both DW Spectrum Server and Client).

• Ubuntu 16.04 LTS “Xenial Xerus” – Released: April 2016 | EoS: 04/2024

• Ubuntu 18.04 LTS “Bionic Beaver” – Released: April 2018 | EoS: 04/2028

• Ubuntu 20.04 LTS: “Focal Fossa” – Released: April 2020 | EoS: 04/2030

**NOTE: DW Spectrum IPVMS for Ubuntu is only available for separate installations (not bundled).

Macintosh OS (supported only by the DW Spectrum Client. DW Spectrum Server is not available for macOS).

• macOS 10.14 “Mojave” – Released: September 2018

• macOS 10.15 “Catalina” – Released: October 2019

• macOS 11.0, 11.1, 11.2 “Big Sur” – Released: November 2020

• macOS 12 “Monterey” – Released: October 2021

**NOTE: DW Spectrum IPVMS for macOS is only supported by the DW Spectrum Client.

• Except Storage Server version
• Important: OS not listed will be not be supported by DW® Tech Support
• Except Storage Server version
• Important: OS not listed will be not be supported by DW® Tech Support
• www.digital-watchdog.com
• sales@digital-watchdog.com
• Rev: 02/24
• Copyright © Digital Watchdog. All rights reserved.
• Specifications and pricing are subject to change without notice.
• Tel: +1 866-446-3595
• Fax: 813-888-9262

References

• Patent Lists - Access Advance
• Resources

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>