ADT Security XPP01 Panic Button Sensor User Guide
- May 15, 2024
- ADT Security
Table of Contents
ADT Security XPP01 Panic Button Sensor
Product Specifications
- Product Name: Panic Button Sensor
- Model Number : XPP01
- Mounting Options: Wristband or Belt Clip
- Power Source: Cell Battery
Product Usage Instructions
Mounting the Panic Button Sensor
- Take the Panic Button Sensor and attach it to your hand wrist or belt clip.
- Connect the Panic Button Sensor to the panel.
Preparing the Panic Button Sensor
Ensure you have the band bracket and belt clip ready for installation.
Adding Panic Button Sensor to the Panel
To add the Panic Button Sensor to your panel, simply press the button on the sensor and follow the panel’s instructions for adding a new device.
Changing the Battery
- Remove the device from the wristband or belt clip.
- Unscrew the bracket to access the battery compartment.
- Remove the old cell battery and replace it with a new one.
Using Your Panic Button Sensor
Add the Panic Button Sensor to your Security Panel. You can wear it on your hand wrist or clip it onto your belt for easy access in case of emergency.
Frequently Asked Questions (FAQ):
Q: How do I know if the Panic Button Sensor is connected to the panel?
- A: Once you have connected the Panic Button Sensor to the panel, you may receive a confirmation message or light indicator on the panel.
Q: How long does the cell battery typically last before needing replacement?
- A: The battery life can vary based on usage, but it is recommended to check and replace the battery annually to ensure optimal performance.
Panic Button Sensor
- The Panic Button Sensor (XPP01) is designed for emergency calls to a monitoring center.
- It communicates with the XP02 Control Panel via 433 MHz frequency.
The Panic button Sensor
Your Panic button Sensor has two key steps:
- Take the Panic button sensor on the hand wrist or belt clip.
- Connect the Panic button sensor to the panel.
Prepare Panic button Sensor
Add a Panic Button Sensor to your panel
Getting your Panic button Sensor up and running is as simple as pressing the button, and adding it to the panel.
Change battery
Please follow the below process.
- Take the device out from the wristband as below picture.
- Unscrew the bracket as below picture.
- Take the device out from the belt clip as below picture.
- Unscrew the bracket as below picture.
- Take away the rear cover. Pull out the cell battery as below pictures.
- Take out the old cell battery and insert a new one as below picture.
Use your Panic Button Sensor
- Add your Panic Button Sensor to the Security Panel.
- You can wear the Panic Button on your hand wrist or clip it on your belt.
- Please refer to the below picture.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>