FEIT ELECTRIC ALERT Smart Audible Alarm Instruction Manual

FEIT ELECTRIC ALERT Smart Audible Alarm

Thank you for your purchase. Questions, comments or feedback? We’d love to hear from you.
Visit feit.com/help for support.

Product Information

The Feit Electric ALERT/WIFI Smart Audible Alarm is an indoor device that can be controlled using the Feit Electric app. It is designed to emit an audible alarm to alert you of any unusual activity or emergencies in your home. The device can be powered with 3.0V CR123/CR123A Lithium Batteries or through a Micro USB Port connection. It only supports 2.4GHz Wi-Fi Networks and can be paired with your smartphone or tablet through Bluetooth.

Usage Instructions

1. Before installing the device, read the instructions carefully and save them for future reference.
2. If you have any questions, problems, or missing parts, visit feit.com/help for further assistance before returning to the store.
3. Use the tools required to mount the sensor, including a Phillips screwdriver, pencil, and power drill. The hardware required for installation is included in the package.
4. Press and hold the Reset Button for five seconds to enter pairing mode.
5. Connect your device to the Feit Electric app by downloading and installing it on your smartphone or tablet. Be sure to connect to a 2.4GHz Wi-Fi network that covers your installation location.
6. Open the Feit Electric app to complete the setup process. The device must be rapidly blinking to connect.
7. The device can emit an audible alarm when necessary. To activate the alarm, press the Reset Button on the device or through the app.

Always follow basic safety precautions when using electrical products, especially when children are present. This product is not a toy and is intended for indoor use only. If you are having difficulty connecting the device, refer to the troubleshooting tips provided in the user manual.

We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this product. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Feit Electric.

Safety Information

IMPORTANT SAFEGUARDS:
ALWAYS FOLLOW BASIC SAFETY PRECAUTIONS WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT.

Supplier’s Declaration of Conformity:
47 CFR § 2.1077 Compliance Information

Responsible Party:
Feit Electric Company 4901 Gregg Road, Pico Rivera, CA 90660, USA
562-463-2852

Unique Identifier:
ALERT/WIFI

• CAUTION: Please read all information carefully before installation.
• CAUTION: Intended for indoor use.
• CAUTION: This product is NOT a toy.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. CAN ICES-005 (B).

• The device has been evaluated to meet general RF exposure requirements.
• The device can be used in portable exposure conditions without restriction.
• The device can be used in mobile (min 7.87 in.) exposure conditions without restriction.

Limited Warranty

This product is warrantied to be free from defects in workmanship and materials for up to 1 year from date of purchase. If the product fails within the warranty period, please visit feit.com/help for instructions on replacement/refund or call 866.326.BULB. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.

Pre-Installation

TOOLS REQUIRED TO MOUNT SENSOR

HARDWARE INCLUDED

• NOTE: Hardware not shown to actual size.

Description

•  Blinking RED Slowly: Low Battery

Reset Button| Press and hold the Reset Button for five seconds to enter pairing mode.

Setup and Installation

1. Setting Up Your Device

   • Remove the Audible Alarm (AA) back cover by turning it counterclockwise.
   • Insert two 3.0V CR123/CR123A Lithium Batteries (BB) or remove the tag if the batteries are inside the device.
   • Place the back cover on the Audible Alarm (AA). Make sure the mounting hole is at the top. Close the back cover by turning it clockwise.
   • Follow the instructions in the App Setup section to set up the device in the Feit Electric app.
     NOTE: This device is normally intended to be powered by a USB power adapter. Use batteries only as a backup power source. You cannot damage the device by using it without batteries.

2. Installation Instruction

   • Mark screw position on your wall.
     NOTE: You can skip this next step if installing on wood or siding.

   • Drill a hole at the marked point. Insert the Mounting Anchor (EE) into the hole.

   • Fasten the Mounting Screw (DD) into the anchor. Leave about 1/4” of the screw threads exposed.

   • Align the Audible Alarm (AA) mounting hole onto the screw. Adjust the screw if necessary to hold better.

3. Connect Using Micro USB Cable

   • Connect the Micro USB Cable (CC) to the Audible Alarm (AA).
   • Connect the other end of the cable to a USB power adapter (sold separately).
   • Plug into any indoor receptacle.

APP Setup

Download and install the Feit Electric app

• Search for the Feit Electric app in the App Store or Google Play Store.
• Download and install the Feit Electric app on your smart device.

Be sure to connect to a 2.4GHz Wi-Fi network that covers your installation location.

Need Help?
Thank you for your purchase. Questions, comments, or feedback? We’d love to hear from you.

Visit feit.com/help for support or connect with us:

Connect Your Device

Open the Feit Electric app to complete the set up

• Tap Add Device or the + sign.

NOTE:
The device must be rapidly blinking to connect. If not already blinking, press and hold the Reset Button for five seconds to enter pairing mode.

Turn on Bluetooth

• The device name(s) will pop up on the Feit app. Tap on Go to add, then select the device to add.
• You will be prompted to enter your Wi-Fi network name and password.
• Only one device may be added at a time using Bluetooth setup. Repeat this step to add additional devices.
• Alternative setup options and help instructions are available in the Feit Electric app.

Troubleshooting Tips

If you are having difficulty connecting:

• Make sure the Wi-Fi network is a 2.4GHz network. Feit Electric smart device will not connect to a 5GHz network.
• Test your Wi-Fi network with other devices such as your phone to make sure it is operating properly.
• The Wi-Fi connection may not have good coverage during setup. Try moving the device closer to your Wi-Fi router.
• Your Wi-Fi network password is case-sensitive, make sure you are entering it correctly.

FEIT ELECTRIC COMPANY | PICO RIVERA, CA | www.feit.com.

References

• Energy Saving Light Bulbs, Light Fixtures | CFL, LED & More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>