Digital Watchdog DWC-VFFMW Flush Mount Low Profile Vandal Dome IP Cameras User Guide

: June 10, 2024
: DIGITAL WATCHDOG

Table of Contents

Digital Watchdog DWC-VFFMW Flush Mount Low Profile Vandal Dome IP Cameras
Product Information
Usage Instructions
WHAT’S IN THE BOX
INSTALLATION
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Digital Watchdog DWC-VFFMW Flush Mount Low Profile Vandal Dome IP Cameras

Product Information

Flush mount for low-profile vandal dome IP cameras (DWC-VFFMW)

The flush mount for low-profile vandal dome IP cameras is a mounting accessory designed to securely and discreetly mount Digital Watchdog’s DWC-M(P)V8 cameras onto a surface. The mount has a low-profile, minimizing the visibility of the camera and reducing the risk of tampering. The mount includes a base, a 3-point in-ceiling wing, and mounting screws. The mount is compatible with specific DWC-M(P)V8 camera models and comes with a mounting template and a quick start guide for easy installation.

Usage Instructions

Before installation, remove the magnetic cover from the flush mount.
Use the mounting template to mark and drill the necessary holes in the mounting surface.
Adjust the 3-point in-ceiling wing using a screwdriver. Twist the screws to tighten and expand until the flush mount is secured to the mounting surface.
To mount the camera to the mounting accessory, remove the dome from the camera base using the wrench included with the camera.
- ( Note: Do not touch the lenses when handling the camera modules.)
Pass wires through the flush mount base and make all necessary connections.
Secure the camera to the flush mount using the appropriate mounting screws. Refer to the table below for screw size:
Camera part number| Mounting screw size
---|---
DWC-MV82DiVT| 25mm mounting screws
DWC-MV82WiATW, DWC-MPV82WiATW| 16mm mounting screws
3-point ceiling wings
DWC-MV85WiATW, DWC-MPV85WiATW| 16mm mounting screws
Flush mount base
DWC-MVC8WiATW, DWC-MPVC8WiATW| 16mm mounting screws
Camera module
DWC-MVC8Wi28TW, DWC-MPVC8Wi28TW| 25mm mounting screws
Camera dome cover
Adjust the camera’s position and angle. Secure the dome cover to the camera base using the screws included with the camera. See the camera’s quick start guide for more information.
Complete the installation by reattaching the magnetic cover over the camera dome.

Note: For additional support materials and tools, visit http://www .digital-watchdog.com/resources and search for your product by entering the part number in the “Search by Product” search bar. All supported materials, including manuals and quick start guides (QSGs), will appear in the results.

WHAT’S IN THE BOX

Camera Mounting Screws for DWC-M(P)V8 Cameras (25mm)

|

2

|

Quick Setup Guide

| |

1

---|---|---|---|---|---

Camera Mounting Screws for DWC-M(P)VC Cameras (16mm)

|

2

|

Mounting Template

| |

1

INSTALLATION

Before the installation, remove the magnetic cover from the flush mount.
Using the mounting template mark and drill the necessary holes in the mounting surface.
Adjust the 3-point in-ceiling wing using a screwdriver. Twist the screws to tighten and expand until the flush mount is secured to the mounting surface.
To mount the camera to the mounting accessory, remove the dome from the camera base using the wrench included
- NOTE: Do not touch the lenses when handling the camera modules.
Pass wires through the flush mount base and make all necessary connections.
Secure the camera to the flush mount using the appropriate mounting screws. Refer to the table below:
Camera part number| Mounting screw size
---|---
DWC-MV82DiVT

DWC-MV82WiATW, DWC-MPV82WiATW DWC-MV85WiATW, DWC-MPV85WiATW

|

25mm mounting screws

DWC-MVC8WiATW, DWC-MPVC8WiATW DWC-MVC8Wi28TW, DWC-MPVC8Wi28TW| 16mm mounting screws
7. Adjust the camera’s position and angle. Secure the dome cover to the camera base using the screws included with the camera. See the camera’s QSG for more information. Complete the installation by reattaching the magnetic cover over the camera dome.