FIXED Zen 30 Power Bank User Manual

June 10, 2024
FIXED

FIXED Zen 30 Power Bank LOGO

FIXED Zen 30 Power Bank

FIXED Zen 30 Power Bank PRODUCT

Product Information: FIXED ZEN 30 Powerbank

Specifications
  • Capacity: 30000mAh
  • Battery type: Li-Pol
  • USB-C/micro USB input: DC 5V/3A, 9V/2A, 12V/1.5A
  • USB-C output: DC 5V/3A, 9V/2A, 12V/1.66A (max. PD 20W)
  • USB-A output: DC 4.5V/5A, 5V/4.5A, 5V/3A, 9V/2A, 12V/1.5A
  • Absolute output (2xUSB-A and 1X USB-C): 22.5 W
  • Dimensions: 145,6×68,6x41mm
  • Weight: 605.6 g

Package Contents

  • 1x Powerbank FIXED ZEN 30
  • 1x USB-A to USB-C charging cable
  • 1x Manual

Product Care and Maintenance

If the device is not used for an extended period of time, it is necessary to charge the battery every two to three months to prevent damage and to avoid reducing the performance of the device. Use a soft cloth to clean the body of the power bank.

Product Usage Instructions

Note: Read the user manual before use.

  1. To check the charge status, press the button on the side of the power bank. The LCD display will light up and show you the power bank’s charge level from 0-100%.
  2. If the power bank is low, use the USB-A to USB-C cable found in the box to charge it and plug it into your mains charger. The powerbank itself charges with up to 18 W. Both the USB-C and micro USB connectors on the side of the power bank are used to charge the powerbank.
  3. Use a USB-A to USB-C cable to charge your device. For 20W PD charging, use your USB-A to USB-C cable and plug into the USB-C port of your power bank.
  4. Charging will then start immediately.
  5. When charging USB-A and USB-C ports at the same time, fast charging drops to 5V output voltage. To restore the PD fast charging function, you need to disconnect the device on USB-A, wait 15 seconds, and then restart the PD fast charging output.

The number on the display also increases synchronously as the power bank’s battery power increases.
Important: FIXED assumes no responsibility for damages caused by improper use of the product.

Instructions for use

  1. To check the charge status, press the button on the side of the power bank. The LCD display will light up and show you the power bank’s charge level from 0-100%.
  2. If the power bank is low, you can use the USB-A to USB-C cable found in the box to charge it and plug it into your mains charger. The powerbank itself charges with up to 18 W. Both the USB-C and micro USB connectors on the side of the powerbank are used to charge the powerbank.
  3. You can use a USB-A to USB-C cable to charge your device. For 20W PD charging, use your USB-A to USB-C cable and plug into the USB-C port of your power bank.
  4. Charging will then start immediately.
  5.  When charging USB-A and USB-C ports at the same time: fast charging drops to 5V output voltage. To restore the PD fast charging function, you need to disconnect the device on USB-A, wait 15 seconds, and then restart the PD fast charging output.

LCD DISPLAY INDICATION

  • Display of the power bank charge status in %.
  • A GREEN symbol indicates that your device is charging quickly.
  • When the power bank itself is charging, a single digit flashes on the battery display and the number on the display also increases synchronously as the power bank’s battery power increases.

FIXED Zen 30 Power Bank 02

PRODUCT SPECIFICATIONS

  • Capacity: 30000mAh
  • Battery type: Li-Pol
  • USB-C/micro USB input: DC 5V/3A, 9V/2A, 12V/1.5A
  • USB-C output: DC 5V/3A, 9V/2A, 12V/1.66A (max. PD 20W)
  • USB-A output: DC 4.5V/5A, 5V/4.5A, 5V/3A, 9V/2A, 12V/1.5A
  • Absolute output (2xUSB-A and 1X USB-C): 22.5 W
  • Dimensions: 145,6×68,6x41mm
  • Weight: 605.6 g

PART OF THE PACKAGE

  • 1x Powerbank FIXED ZEN 30
  • 1x USB-A to USB-C charging cable
  • 1x Manual

NOTES
The product is warranted according to the legal regulations in force in the countries where it is sold. In case of service problems, please contact the dealer from whom you purchased the equipment. FIXED assumes no responsibility for damages caused by improper use of the product.

PRODUCT CARE AND MAINTENANCE

If the device is not used for an extended period of time, it is necessary to charge the battery every two to three months to prevent damage and to avoid reducing the performance of the device. Use a soft cloth to clean the body of the power bank.

SECURITY MEASURES
Do not expose the device to rain or snow or immerse it in water. Do not leave the power bank in the car in the sun. Do not expose the device directly to sunlight or leave it near heat sources. Do not use the power bank if it has been subjected to a severe impact, if it has fallen, or if it is damaged in any way. Do not disassemble the device, there is a risk of electric shock and/or burns. Do not modify the power cord. Keep the power bank out of the reach of children. Unauthorized opening or modification of product parts will result in forfeiture of warranty. Product storage temperature: 0 to 35 °C Product operating temperature: 0 to 40 °C

TROUBLESHOOTING

If you have any problems with your product, you can contact our support at www.fixed.zone/podpora
This product is CE marked in accordance with EMC Directive 2014/35/EU and RoHS Directive 2011/65/EU. FIXED. zone a.s. hereby declares that this product complies with the essential requirements and other relevant provisions of EMC Directives 2014/35/EU and 2011/65/EU.
FIXED.zone a.s.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

FIXED User Manuals

Related Manuals