DIGITAL WATCHDOG DWC-PZHMW Hanging Pendant Mount for Multi-Sensor Cameras User Guide
- June 10, 2024
- DIGITAL WATCHDOG
Table of Contents
DIGITAL WATCHDO DWC-PZHMW Hanging Pendant Mount for Multi-Sensor Cameras
Hanging Pendant Mount for Multi-Sensor Cameras
Product Information
The DWC-PZHMW is a hanging pendant mount for multi-sensor cameras. It comes with camera mounting screws, a quick setup guide, and a safety wire. The mount is designed to be used with Digital Watchdog cameras and is compatible with NPT 3/4 tap.
Usage Instructions
- Attach the pipe to the camera base.
- Secure the pipe to the ceiling or other appropriate structure using suitable hardware.
- Affix the safety wire at the bottom of the hanging mount. Connect the other side of the safety wire to the base of the camera.
- Pass wires through and make all necessary connections.
- Use the camera mounting screws (included with bracket) to secure the camera to the mount cap. Align the indented lines on the side of the camera with the lines on the hanging mount. Rotate the camera clockwise to lock into position.
- Adjust the camera lens modules’ position and complete the installation by placing the dome cover on the camera. See the camera’s QSG for camera setup information.
Note: Do not touch the lenses when handling the camera modules.
Support Materials
For additional support materials, including manuals and quick start guides (QSGs), visit digital-watchdog.com/resources. Enter the part number in the ‘Search by Product’ search bar to find applicable support materials.
Hanging pendant mount for multi-sensor cameras
DWC-PZHMW
WHAT’S IN THE BOX
Camera Mounting Screws| | 2| Quick Setup Guide| | 1
Safety Wire| | 1| | |
NOTE: Download all your support materials and tools in one place.
- Go to: http://www.digital-watchdog.com/resources
- Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will populate automatically based on the part number you enter.
- Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
digital-watchdog.com
Tel: +1 866-446-3595 /
813-888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
INSTALLATION
-
Secure the hanging mount to the pole (NTP ¾ thread).
-
Before attaching the camera to the hanging mount, remove the dome from the camera base.
-
Affix the safety wire at the bottom of the hanging mount. Connect the other side of the safety wire to the base of the camera.
-
Pass wires through and make all necessary connections.
-
Use the camera mounting screws (included with bracket) to secure the camera to the mount cap. Align the indented lines on the side of the camera with the lines on the hanging mount. Rotate the camera clockwise to lock into position.
-
Adjust the camera lens modules’ position and complete the installation by placing the dome cover on the camera. See the camera’s QSG for camera setup information.
NOTE: Do not touch the lenses when handling the camera modules.
Copyright © Digital Watchdog. All rights reserved. Specifications and pricing are subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>