savio WE-02 Bluetooth Earphones User Manual
- June 10, 2024
- Savio
Table of Contents
savio WE-02 Bluetooth Earphones User Manual
Thank you for choosing Savio product!
If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, social media or on the website of the store where you made the purchase. If you want to show our device on SAVIO Facebook Page, we will be very pleased.
If there is something that we could improve on our products, please write to us at [email protected]
Thanks to your feedback, we will be able to better adapt the product to your expectations.
Before starting the use of purchased device it is recommended to read the whole manu
Connection of the earphone
- Press and hold button until the LED flashes red and blue.
- Turn on the Bluetooth in the device (e.g. Smartphone) and search option to find SAVIO WE-02 earphones. Then pair them. If they have already been paired with the device, they will be paired automatically
Product description
- Charge input: micro USB
- Button: increasing the volume / switching tracks
- Button: turning the device on / off, receiving / rejecting calls
- Button: decreasing the volume / switching tracks
- LED indicates the device operating mode
- Microphone
Button description
Button
- Press and hold: volume up
- One-time press: select the next song
Button
- Press and hold: turn on / off device
- Fast press twice: call the last dialled number
- One-time press during playing music: play / pause
Button during the incoming conversation
- One-time press: answer an incoming call
- Press and hold: hung up an incoming call
Button
- Press and hold: volume down
- One-time press: choose last
Package content
- Wireless Bluetooth earphones
- Charging cable USB(M)- Micro USB(M)
- Additional silicone earbuds for earphones
- User manual
LED indicators
- Flashing red and blue colour diode, indicates that there is no connection via Bluetooth
- Flashing blue diode at 5 seconds intervals inform about right connection with device
- Flashing red diode informs that the battery is low
Technical specification
- Bluetooth version: 5.0 + EDR
- Operating range: up to 10 meters
- Working time: up to 3 h
- Charging time: up to 1 h
- Standby time: up to 120 h
- Impedance: 32 Ω
- Microphone impedance: 2.2 Ω
- Frequency response: 20 Hz – 20 kHz
- Built-in microphone: Yes
- Earphones sensitivity: 105 dB (± 5 dB)
- Microphone sensitivity: -39 dB
- LED notification light: Yes
- Frequency bands in which the radio equipment operates: 2400 – 2483.5 MHz
- Maximum radio-frequency power transmitted in the frequency band in which the radio equipment operates: 4dBm
- Weight: 13.5 g
Safety conditions
- Do not use earphone during charging.
- Charge earphone for 2 hours maximum. Longer time of charging can cause overcharge of the battery and can damage built-in battery.
- Use this device as intended.
- Incorrect use of the device may damage the device.
- Independent repairs and modification results in automatic loss of the warranty.
- Hitting or dropping the device could cause damage of the device.
- The device should be used in dry area, the device should be protected from water and high humidity
Information for customers and contractors and communication regarding complaints:
Pursuant to Article 13 section 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registeredseat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e mail address: [email protected], and by phone at +48 (17) 854 98 14. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of Administrator’s legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27, 2016.
Information of the utilization of electrical and electronic equipment
This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment should be handed over to a local collection point for this type of waste or to a recycling center. Please contact your local authorities for information about disposal methods available in your area. Waste electrical equipment may contain hazardous substances (e.g. mercury, lead, cadmium, chromium, phthaltes) which can get into air, soil and groundwater when leaking from used appliances. Environmental pollution with these substances leads to their bioaccumulation, causing lesion of disease in living organisms, which would pose a risk to human and animal health or life. Households may contribute to environmental protecion by proper waste collection. In such way, hazardous substances from the equipment are neutralized and valuable secondary raw materials are reused for production of new equipment.
Warranty
The warranty covers a period of 24 months. Independent repairs and modifications result in automatic loss of the warranty. Warranty card is available for download on our website: www.savio.net.pl/en/service