DIGITAL WATCHDOG DWC-V7HMW V7 Ultra Hanging Mount User Guide
- June 10, 2024
- DIGITAL WATCHDOG
Table of Contents
DIGITAL WATCHDOG DWC-V7HMW V7 Ultra Hanging Mount
Product Information
The DWC-V7HMW is a hanging mount for Digital Watchdog’s ultra-low profile vandal domes. It’s designed to securely and easily mount the camera to a ceiling or other high surface for optimal surveillance coverage. The mount is compatible with the DWC-V7 series of cameras and comes with camera mounting screws for easy installation.
Product Usage Instructions
- Before attaching the camera to the hanging mount, remove the dome from the camera base.
- Pass wires through and make all necessary connections.
- Use the camera mounting screws (included with bracket) to secure the camera to the mounting cap.
- Adjust the camera lens modules’ position and complete the installation by placing the dome cover on the camera. See the camera’s QSG for camera setup information.
- IMPORTANT: Do not touch the lenses when handling the camera modules.
If you need additional support or information, please visit Digital Watchdog’s website and search for your product by entering the part number in the ‘Search by Product’ search bar. All supported materials, including manuals and quick- start guides (QSGs), will appear in the results.
WHAT’S IN THE BOX
Camera Mounting Screws | 2 | Quick Setup Guide | 1 |
---|
NOTE:
Download all your support materials and tools in one place.
- Go to: http://www.digital-watchdog.com/resources.
- Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will populate automatically based on the part number you enter.
- Click ‘Search’. All supported materials, including manuals and quick start guides (QSGs), will appear in the results.
INSTALLATION
- Secure the hanging mount to the pole (NTP ¾ thread).
- Before attaching the camera to the hanging mount, remove the dome from the camera base.
- Pass wires through and make all necessary connections.
- Use the camera mounting screws (included with bracket) to secure the camera to the mounting cap.
- Adjust the camera lens modules’ position and complete the installation by placing the dome cover on the camera. See the camera’s QSG for camera setup information.
NOTE: Do not touch the lenses when handling the camera modules.
Copyright © Digital Watchdog. All rights reserved. Specifications and pricing are subject to change without notice.
Tel: +1 866-446-3595 /
813-888-9555
Technical Support Hours: 9:00 AM – 8:00 PM EST, Monday through Friday.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>