AES e-LOOP Fitting Commercial Radar Kit Instructions

AES e-LOOP Fitting Commercial Radar Kit **

**

Product Information:

• Frequency: 433.39 MHz
• Security: 128-bit AES encryption
• Range: up to 50 meters
• Battery life: up to 10 years
• Battery type: Lithium-ion 3.6V 2600 mA x 4

Product Usage

e-LOOP Fitting Instructions

1. Power up the e-Trans 50 and hold the e-Loop within 10cm of the transceiver’s antenna.
2. Press and release the CODE button on the e-Trans 50. The yellow and red LEDs will flash on the e-Loop, and the blue LED on the e-Trans 50 will flash 3 times. The systems are now paired. (For coding the e-Trans 200 LCD transceiver refer to the e-Trans 200 manual.) (For coding the e-Trans 200 LCD transceiver refer to the e-Trans 200 manual.)

Coding e-LOOP with Magnet (Commercial systems only)

1. Power up the e-Trans 50, then press and release the CODE button. The blue LED on the e-Trans 50 will light up.
2. Place the e-LOOP device in the desired location and secure it into the ground using 2 concrete fixing bolts. Ensure the e-LOOP device is secured and can’t be moved when touched. (Never fit near high voltage cables, this can affect the e-LOOP’s detection capability.)
3. Move any metal objects away from the e-LOOP.
4. Place the magnet into the SET button recess on the e-LOOP until the red LED flashes twice, then remove the magnet.
5. The e-LOOP will take about 5 seconds to calibrate and once complete, the red LED will flash 3 times.

Uncalibrated e-LOOP

1. Place the magnet into the SET button recess until the red LED flashes 4 times, e-LOOP is now uncalibrated.

Changing mode

The e-LOOP is set to pulse mode as a standard setting. This can be changed to presence mode via the menu in the e-TRANS-200 LCD transceiver – refer to the manual.

(Note: this menu cannot be accessed via the eTRANS-50 Transceiver.)

• Pulse / Presence mode. (Note: do not use presence mode as a safety function.)
• Wake-up time intervals for presence mode.
• Sensitivity detection level for Pulse mode.
• Sensitivity detection for presence mode by each axis : Above / Approach / Side.
• Radar detection distance.

Note: After calibration, you may get an error indication.

• ERROR 1: Low radio range – Yellow LED flashes 3 times.
• ERROR 2: No radio connection – Yellow and Red LED flashes 3 times.

Disclaimer: Units with the presence feature are not to be used as a sole safety device and should be used in conjunction with standard gate safety practices.

Contact Information

• Email: sales@aesglobalonline.com
• Phone: +44 (0) 288 639 0 693
• Website: www.aesglobalonline.com

Specifications

• Frequency: 433.39 MHz.
• Security: 128-bit AES encryption.
• Range: up to 50 meters.
• Battery life: up to 10 years.
• Battery type: Lithium-ion 3.6V 2600 mA x 4.

Step 2 – Fitting e-LOOP

1. 1. Place the e-LOOP device in the desired location and secure it into the ground using 2 concrete fixing bolts. Ensure the e-LOOP device is secured and can’t be moved when touched.

NOTE: Never fit near high-voltage cables, this can affect the e-LOOP’s detection capability.

Step 3 – Calibrate e-LOOP

1. Move any metal objects away from the e-LOOP.
2. Place the magnet into the SET button recess on the e-LOOP until the red LED flashes twice, then remove the magnet.
3. The e-LOOP will take about 5 seconds to calibrate and once complete, the red LED will flash 3 times.

NOTE: After calibration, you may get an error indication.
ERROR 1: Low radio range – Yellow LED flashes 3 times.
ERROR 2: No radio connection – Yellow and Red LED flashes 3 times.

The system is now ready.

1. Place the magnet into the SET button recess until the red LED flashes 4 times, e-LOOP is now uncalibrated.

Parameters that can be altered

1. Pulse / Presence mode. NOTE: do not use presence mode as a safety function.
2. Wake-up time intervals for presence mode.
3. Sensitivity detection level for Pulse mode.
4. Sensitivity detection for presence mode by each axis: Above / Approach / Side.
5. Radar detection distance.

DISCLAIMER: UNITS WITH THE PRESENCE FEATURE IS NOT TO BE USED AS A SOLE SAFETY DEVICE & SHOULD BE USED IN CONJUNCTION WITH STANDARD GATE SAFETY PRACTICES.

E. sales@aesglobalonline.com
T: +44 (0) 288 639 0 693
www.aesglobalonline.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>