UMAXX 2AOVUSN6BKUB Set Top Box User Guide
- June 1, 2024
- UMAXX
Table of Contents
UMAXX 2AOVUSN6BKUB Set Top Box
Product Information
Specifications:
- Hardware: Amlogic S905Y4-B
- Chipset: eMMC 8GB
- RAM: Not specified
- Flash: Not specified
- Video Decoding: AV1 MP-10@L5.1 up to 4Kx2K@60fps
- Video File Format Support: .mkv, .wmv, .mpg, .mpeg, .dat, .avi, .mov, .iso, .mp4, .rm, .jpg, .bmp, *.gif, etc…
- Video Output: HDMI 2.1, HDCP2.2
- Aspect Ratio: Auto, Fullscreen
- Power:
- DC Input Range: 12V 1A
- Power Consumption: 12W
Product Usage Instructions
Pairing the Remote Control:
Long press the Back and Home buttons simultaneously until the red light
flashes quickly. Release the buttons to enter pairing mode. Wait for a few
seconds without pressing any buttons until a message appears on the screen
confirming successful pairing.
FAQ:
-
Q: How do I pair the remote control?
A: To pair the remote control, long press the Back and Home buttons simultaneously until the red light flashes quickly. Release the buttons and wait for a few seconds until a message appears on the screen confirming successful pairing. -
Q: What video file formats are supported?
A: The device supports video file formats such as .mkv, .wmv, .mpg, .mpeg, .dat, .avi, .mov, .iso, .mp4, .rm, .jpg, .bmp, *.gif, etc… -
Q: What is the power input requirement?
A: The device requires a DC input of 12V 1A with a power consumption of 12W.
QUICK GUIDE
- STB
- Quick Guide
- Remote Control
- Power Adapter
- Battery
- HDMI Cable
DEVICE INFORMATION
- AV OUT
- LAN
- HDMI
- OPTICAL
- DC 12V
- Micro SD
- USB 2.0
- USB 2.10
SETUP DIAGRAM / REMOTE CONTROL
Pairing guide
Long press the Back and Home buttons at the same time until the red light
flashes quickly, then release. This means the remote control has entered
pairing mode. Wait for a few seconds without pressing any buttons until a
message pops up on the screen that the remote has paired successfully.
ATSC 3.0 DONGLE (OPTIONAL)
SPECIFICATION
SAFETY INFORMATION
NOTICE: To prevent fire and electric shock, do not expose this device to rain or moisture. In order to avoid any possible risk of electric shock, never attempt to open the unit. In case of the unit breaking down, repair of the unit should be carried out by qualified technicians. No part of this unit should be repaired by users.
WARNING!
- Place the device in a well-ventilated location to prevent accumulation of internal heat.
- Protect the device from high temperatures, humidity, water and dust.
- Do not place any objects that might damage your unit near it (e.g. liquid liquid-filled objects or candles).
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>