Dals Lighting DCP-STG48 48′ RGB+CCT Pro Outdoor Fairy Lights Instruction Manual

Dals Lighting DCP-STG48 48′ RGB+CCT Pro Outdoor Fairy Lights

ITEMS INCLUDED IN THE BOX ARTICLES INCLUS DANS LA BO/TE

1. Plug-in driver
2. Smart Control box
3. 48′ / 15 Bulbs String Light (3.3Ibs per set)
4. 15 Ferrite ring

‘The maximum number of DCP-STR48 sets supported on the included plug-in transformer is 2.

COMPATIBLE ACCESSORIES (SOLD SEPARATELY):

DCP-STGACCBLB:|
Replacement bulb / Ampoule de remplocement

DCP-STGACCLENS:
PCB replacement / PCB de remplacement

WARRANTY / GARANTIE

DALS offers a 5-year warranty from the date of purchase which covers repairs or replacements of defective parts of the housing, optics, and electronics. To contact DALS customer service call 1 877 430 1818 or send an e-mail to info@dals.com.

Installation guide

BEFORE YOU START
BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE CIRCUIT BREAKER.
Instructions pertaining to a risk of fire, electric shock or injury to persons. Installation must be done according to local electrical codes. Installation should be done by a certified electrician.

1. Ensure that the plug-in adapter is not plugged in.
2. Use the built-in eyelets to hang your string light bulbs. (Maximum weight of 22 pounds per eyelet)
3. Turn the power back on. 

For residential installations, we recommend putting the ferrite rings in between each bulb.

1. Localize the clips on the ferrite ring and lift them to open the ring.
2. Place the ring around the wire, anywhere in-between 2 bulbs and clamp it down.
3. Repeat in between each bulb.

Dais Connect
To pair your product, follow the steps on the App Pour connecter votre produit, suivre Jes etopes sur /’application

FCC COMPLIANCE

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ 1V technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation

IC COMPLIANCE – CANICES-5C-)/NMB-5(•)

Industry Canada Notice
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ISED RF Exposure Statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the ISED radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (7.9 inches) during normal operation

dais
1 877 430 1818
www.dals.com
INS_DCP-STG48_REV3

Download the free Dais Connect app

Documents / Resources

| Dals Lighting DCP-STG48 48' RGB+CCT Pro Outdoor Fairy Lights [pdf] Instruction Manual
DCP-STG48 48 RGB CCT Pro Outdoor Fairy Lights, DCP-STG48, 48 RGB CCT Pro Outdoor Fairy Lights, Outdoor Fairy Lights, Fairy Lights
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>