dals Lighting DCP-RK18 KAYU Smart Recessed Panel Light Installation Guide
- June 9, 2024
- dals Lighting
Table of Contents
Lighting DCP-RK18 KAYU Smart Recessed Panel Light
Installation Guide
DCP-RK18 KAYU Smart Recessed Panel Light
1 877 430 1818
www.dals.com
Download the free Dals Connect app
MODEL | WATTS | LUMENS | KELVIN | INPUT | **DIMMABLE*** |
---|---|---|---|---|---|
DCP-RK10 | 5W | 4001m | ROB + CCT 2200-4000K | 24VDC | |
DCP-RK18 | 7W | 600 Im | RGB + CCT 2200-4000K | 24VDC |
*Dais Connect AppTM
Landscape transformer, model DCP-TR60-BK, DCP-TR200-BK or DCP-PTR36 is required for installation. Sold separately.
ITEMS INCLUDED IN THE BOX
|
---|---
- LED rock light
- 6″ ground stake
- 6″ T-connector
- 6′ Extension cable
COMPATIBLE ACCESSORIES (SOLD SEPARATELY)
DCP-TR60-BK: Transformer
DCP-TR200-BK: Transformer
DCP-PTR36: Plug-in driver
DCP-ACC-MS12: Metal ground stake 12″
DCP-ACC-MS06: 6″ metal stake
DCP-ACC-MB: Mounting bracket
DCP-EXT2OFT: 20′ extension cable
DCP-EXT6FT: 6′ extension cable
DCP-EXT-T: 6″ T-connector
WARRANTY
DALS offers a 5 year warranty from the date of purchase which covers repairs
or replacements of defective parts of the housing, optics, and electronics.
To contact DALS customer service call 1 877 430 1818 or send an e-mail to
info@dals.com.
Installation guide
BEFORE YOU START
BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE CIRCUIT
BREAKER.
Instructions pertaining to a risk of fire, electric shock or injury to
persons. Installation must be done according to local electrical codes.
Installation should be done by a certified electrician.
-
Ensure that the power from the transformer is turned off.
Concrete or deck installation
Use the mouting bracket DCP-ACC-MB (sold separately) to install the fixture on concrete or wood. -
Insert the stake into the ground.
-
Connect the fixture.
-
Attach the fixture to the ground stake by turning it until it is fully inserted.
-
Turn power back on.
Dais Connect
To pair your product, follow the steps on the App
FCC COMPLIANCE
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. In order to avoid
the possibility of exceeding the FCC radio frequency exposure limits, Human
proximity to the antenna shall not be less than 20cm (8 inches) during normal
operation
IC COMPLIANCE
CANICES-5()/NMB-5()
Industry Canada Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
2.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
1 877 430 1818
www.dals.com
INS_DCP-RKXX_REV2
Documents / Resources
| dals
Lighting DCP-RK18 KAYU Smart Recessed Panel
Light
[pdf] Installation Guide
DCP-RK18, KAYU Smart Recessed Panel Light, Recessed Panel Light, KAYU Smart
Panel Light, Panel Light, Light
---|---